TINSOL X81

Contents

TINSOL X81 Ultrasonic Cleaner User Manual

High-Frequency Vibration Cleaning Machine

1. Introduction

The TINSOL X81 Ultrasonic Cleaner is designed to provide efficient and gentle cleaning for a variety of small items using high-frequency ultrasonic waves. This manual provides essential information for the safe and effective operation of your device.

TINSOL X81 Ultrasonic Cleaner with glasses, watch, and jewelry being cleaned

Figure 1: TINSOL X81 Ultrasonic Cleaner in operation.

2. Product Components

Familiarize yourself with the parts of your ultrasonic cleaner:

  • Lid: Transparent cover to prevent splashing during operation.
  • Washing Tank: Stainless steel inner tank where items are placed for cleaning.
  • Touch Buttons: Control panel for power and cleaning modes.
  • Power Interface: Port for connecting the power adapter.
Diagram of Ultrasonic Cleaner components including lid, washing tank, touch buttons, and power interface

Figure 2: Product diagram showing main components (refer to "PRODUCT MIX" section of the image).

3. Setup

  1. Place the ultrasonic cleaner on a stable, flat, and dry surface.
  2. Ensure the power interface is easily accessible.
  3. Connect the provided power adapter to the power interface on the unit and then plug it into an appropriate electrical outlet. The device supports AC100~120V 50/60Hz or AC220~240V 50/60Hz, depending on your region's plug type (EU or KR).

4. Operating Instructions

4.1. Cleaning Procedure

  1. Prepare the Tank: Open the lid and fill the washing tank with water. For enhanced cleaning, you may add a small amount of detergent. Do not exceed the maximum water level indicated inside the tank.
  2. Place Items: Carefully place the items to be cleaned into the water. Ensure items are fully submerged but not overcrowded.
  3. Close Lid: Close the lid securely to prevent splashing during operation.
  4. Start Cleaning: Touch the ON/OFF button (usually indicated by a power symbol or a light) to start the cleaning cycle. The indicator light will illuminate.
  5. Select Cleaning Mode: The cleaner offers three optional cleaning modes:
    • 3 minutes: Quick cleaning
    • 6 minutes: Standard cleaning
    • 12 minutes: Strengthened cleaning
    Press the mode button repeatedly to cycle through the desired cleaning duration.
  6. Stop Operation: To stop the cleaning process at any time, press the ON/OFF button three times in succession.
  7. After Cleaning: Once the cycle is complete, unplug the power adapter from the outlet. Open the lid, carefully remove the cleaned items, and pour out the water from the tank.
  8. Dry the Unit: Wipe the inside of the washing tank and the exterior of the machine dry with a soft cloth.
Ultrasonic cleaner control panel with 3, 6, and 12 minute cleaning options

Figure 3: Control panel with cleaning time options.

4.2. Cleaning Principle

The ultrasonic cleaner works by generating high-frequency sound waves (49KHz) that create microscopic bubbles in the cleaning solution. This process is known as cavitation. These bubbles rapidly form and collapse, creating tiny vacuum effects that dislodge dirt, grime, and contaminants from the surface of the items, even in hard-to-reach areas. This vibration is clean and harmless to objects.

Diagram illustrating high-frequency vibration cleaning process

Figure 4: Illustration of ultrasonic vibration cleaning.

Before and after cleaning comparison of glasses

Figure 5: Example of 360° rapid decontamination.

5. Maintenance

To ensure the longevity and optimal performance of your ultrasonic cleaner, follow these simple maintenance steps:

  • Always unplug the device before cleaning or when not in use.
  • After each use, empty the washing tank and wipe it dry with a soft, clean cloth.
  • Clean the exterior of the unit with a damp cloth. Do not use abrasive cleaners or immerse the main unit in water.
  • Store the cleaner in a cool, dry place away from direct sunlight and moisture.

6. Troubleshooting

If you encounter any issues with your ultrasonic cleaner, please refer to the following common solutions:

ProblemPossible CauseSolution
Unit does not turn onPower adapter not properly connected or no power from outlet.Ensure the power adapter is securely plugged into both the unit and a working electrical outlet. Test the outlet with another device.
Cleaning performance is poorInsufficient water/detergent, tank overcrowded, or item too dirty.Ensure proper water level and add appropriate detergent. Clean fewer items at a time. For heavily soiled items, pre-rinse or run multiple cycles.

7. Specifications

ParameterValue
ModelX81
TypeUltrasonic Cleaner
VoltageAC100~120V 50/60Hz / AC220~240V 50/60Hz
Power40W
Capacity650ml
Ultrasonic Frequency49KHz (48KHz±2KHz)
Tank MaterialStainless steel 304
Tank Internal Dimensions (L x W x H)200mm x 105mm x 40mm
Product Dimensions (L x W x H)227mm x 122mm x 72mm
Net Weight550g
CertificationCE
OriginMainland China
Ultrasonic cleaner showing 650ml capacity

Figure 6: 650ml tank capacity.

8. User Tips

  • For optimal cleaning of glasses and other items, consider adding a small amount of dish soap to the water.
  • Running a 12-minute cycle with soapy water can be very effective for thorough cleaning, especially for items worn for a long time.
  • The device is well-suited for home use and provides good value for cleaning everyday items like glasses, jewelry, and razors.

9. Frequently Asked Questions (FAQ)

Q: What are the internal dimensions of the tank?
A: The internal dimensions of the washing tank are approximately 200mm (length) x 105mm (width) x 40mm (height).

10. Warranty and Support

For any warranty claims, technical support, or inquiries regarding your TINSOL X81 Ultrasonic Cleaner, please contact the seller or the point of purchase. Please refer to the official user manual PDF for more detailed information: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.