1. Product Overview
The KuWFi MF989 is a high-capacity 4G Mobile Router designed for portable and reliable internet access. Featuring a robust 10000mAh built-in battery, it ensures extended usage without constant recharging. This device supports 2.4G Wi-Fi with speeds up to 150Mbps and includes an Ethernet port for wired connections, making it versatile for various environments, from home to outdoor travel.
2. Specifications
| Feature | Specification |
|---|---|
| Brand Name | KuWFi |
| Model | MF989 |
| Type | Wireless Router with Modem Function |
| Built-in Battery | 10000mAh |
| Wired Transfer Rate | 10/100Mbps |
| Wi-Fi Transmission Standard | 802.11n |
| 2.4G Wi-Fi Transmission Rate | 150 Mbps |
| Wi-Fi Supported Frequency | 2.4G |
| Supports WPS | Yes |
| Supports WDS | No |
| WAN Ports | 1 x 10/100Mbps |
| LAN Ports | 1 |
| Application | Outdoor / Home |
| Standards And Protocols | Wi-Fi 802.11g, Wi-Fi 802.11b, Wi-Fi 802.11n |
| Wireless Transmission Rate | 150m |
| Support Mesh | Not Supported |
| Frequency | 2.4 GHz |
| Antenna Type | Internal |
| Wireless Communication Standard | 802.11.n |
| Frequency Band Class | Single-Band |
| CAT 4G Download Speed | Up to 150Mbps |
| CAT 4G Upload Speed | Up to 50Mbps |
| External Antenna Port | TS9 Antenna Port (Antenna not included) |
| Certification | CE |
3. Setup Guide
Follow these steps to set up your KuWFi 4G Mobile Router and connect to the internet.
3.1 Initial Connection and WebUI Login
- Insert SIM Card: Ensure a Nano SIM card with an active data plan is inserted into the designated slot.
- Power On: Press and hold the power button until the device powers on.
- Connect to Wi-Fi: On your computer or mobile device, search for available Wi-Fi networks. Connect to the network named similar to "HXF1715A" or "4G-MIFI-3662". The default password is
1234567890. - Access WebUI: Open a web browser and enter
192.168.0.1in the address bar. - Login: Use the default username
adminand passwordadminto log in to the router's web interface.
4. Operating Instructions
Once logged into the WebUI, you can configure various settings for your router.
4.1 APN and Network Settings
To configure your mobile network settings:
- Navigate to the "Internet" or "Network Settings" section in the WebUI.
- Network Mode: Select your preferred network mode (e.g., 4G/3G/2G multimode or 4G Preferred).
- APN Settings:
- Auto APN: You can enable or disable this feature. If disabled, you will need to manually enter APN details.
- Connection Mode: Set to Manual if you need to input specific APN details.
- Dial in Roaming: Enable if you plan to use the device while roaming.
- APN: Enter the Access Point Name provided by your mobile carrier (e.g., "cmnet").
- IP Type: Typically IPv4.
- MTU (1000-1500): Adjust if necessary, default is usually 1500.
- LTE Authentication Type: Select NONE or as required by your carrier.
- User Name/Password: Enter if required by your carrier for APN authentication.
4.2 Wireless Wi-Fi Settings
To manage your Wi-Fi network:
- Go to the "Wireless" section in the WebUI.
- Wireless Network Status: Enable or disable the Wi-Fi network. You can also choose to hide the SSID for added security.
- Maximum Simultaneous Clients: Set the maximum number of devices that can connect (default is 17).
- SSID: Change the Wi-Fi network name (e.g., "4G MIFI-3862").
- Password: Change the Wi-Fi password from the default (e.g., "1234567890").
- 802.11 Mode: Select the Wi-Fi standard (e.g., 802.11n big compatible).
- Channel: Set to Automatic for optimal performance.
- Channel Bandwidth: Typically HT40 for 2.4G networks.
- Authentication Type: WPA2-PSK is recommended for security.
- Encryption Algorithm: AES-CCMP is recommended.
- WPS: Use the WPS feature for easy connection of compatible devices.
5. Maintenance and Traffic Management
5.1 Traffic Management Settings
You can monitor and manage your data usage through the WebUI:
- Navigate to the "Traffic Management" section in the WebUI.
- Traffic Control Settings:
- Set a warning threshold for data usage (e.g., 90%).
- Configure the device to disconnect automatically if a certain data limit is reached (e.g., 100%).
- Monthly Traffic Settings: Enable or disable monthly traffic management to track your data consumption over a billing cycle.
6. Troubleshooting
If you encounter issues with your KuWFi 4G Mobile Router, try the following:
- No Internet Connection:
- Check if the SIM card is correctly inserted and has an active data plan.
- Verify APN settings in the WebUI match your carrier's requirements.
- Ensure mobile data is enabled in the router settings.
- Check signal strength indicators on the device or in the WebUI.
- Cannot Connect to Wi-Fi:
- Ensure the Wi-Fi function is enabled in the WebUI.
- Double-check the Wi-Fi password.
- Restart the router and your connecting device.
- Slow Speed:
- Check signal strength; move to an area with better reception.
- Reduce the number of connected devices.
- Ensure no data limits or traffic management rules are throttling your connection.
- Device Not Powering On:
- Ensure the battery is charged. Connect the device to a power source using the provided USB cable.
- Factory Reset: If problems persist, you may need to perform a factory reset. Refer to the full user manual for instructions on how to do this, as it will erase all custom settings.
7. User Tips
Based on user feedback, here are some helpful tips for using your KuWFi 4G Mobile Router:
- The device is generally easy to set up, even for first-time users.
- Users report good quality and reliable speed, making it suitable for various internet needs.
- Its portable design and long-lasting battery make it an excellent choice for travel and outdoor use.
- Consider purchasing a SIM card separately, as it is not included with the device.
8. Warranty and Support
For detailed warranty information and further technical support, please refer to the official KuWFi documentation or contact customer service.
A comprehensive user manual in PDF format is available for download. You can access it via this link: KuWFi 4G Mobile Router User Manual (PDF).
9. Safety Information
Please read and follow all safety instructions to prevent injury or damage to the device:
- Do not expose the device to extreme temperatures, direct sunlight, or moisture.
- Use only approved chargers and accessories.
- Do not disassemble or attempt to repair the device yourself.
- Keep the device away from children and pets.
- Dispose of the device and its battery responsibly according to local regulations.