mrhello USB High Low Gear Shifter Knob

Contents

User Manual: Truck Simulator PC USB High Low Gear Shifter Knob

Model: USB High Low Gear Shifter Knob | Brand: mrhello

Introduction

This manual provides instructions for the installation, setup, and operation of your new mrhello USB High Low Gear Shifter Knob. Designed to enhance your truck simulation gaming experience, this shifter knob offers realistic high and low gear switching for compatible PC games.

Specifications

Feature Detail
Product Name USB Gearshift Knob
SKU 99332
Material Plastic + Metal
Item Type Gear Shift Knob
Color Black
Origin Mainland China
Connectivity Independent USB cable, Plug and Play, Drive-free
System Compatibility PC Windows 7 and above systems ONLY. Not compatible with XBOX X1/PS4/PS5/Mac.
Gear Configuration High and low gear handball head, two switchers for up to 18 gears, custom setting button.
Connector Compatibility Aluminum alloy processing, compatible with 12mm, 10mm, 8mm connections.
Compatible Equipment Logitech G25/G27/G29/G923, Thrustmaster TH8A, FANATEC ClubSport Shifter SQ, Kraton, Laishi.
Dimensions (Approx.) Length: 155mm, Width: 67mm
Dimensions of the USB Gearshift Knob and included adapters
Figure 1: Product dimensions and adapter sizes (M8, M10, M11, M12).
Compatibility diagram showing Logitech G923, G27, G29, and Thrustmaster TH8A
Figure 2: Compatibility with various racing wheels and shifters. Note: Only for PC USB port.

Package Contents

  • 1 x USB SIM Shifter Knob
  • Adapter(s) (M8, M10, M11, M12 sizes included)
  • Hex key and screws for installation
Contents of the package including the shifter knob, adapter, and screws
Figure 3: Overview of the USB Gearshift Knob and included accessories.

Setup

1. Physical Installation

  1. Select the appropriate adapter (M8, M10, M11, or M12) that matches your existing gear shifter's shaft diameter.
  2. Securely attach the chosen adapter to your shifter's shaft.
  3. Mount the USB Gearshift Knob onto the adapter.
  4. Connect the USB cable from the shifter knob to an available USB port on your PC.
Diagram showing the shifter toggle buttons and their functions
Figure 4: Shifter Toggle and Joy Button assignments.

2. Software Setup (ETS2 / ATS)

The shifter is plug-and-play and drive-free for PC Windows 7 and above systems. Follow these steps to configure it in Euro Truck Simulator 2 (ETS2) or American Truck Simulator (ATS):

  1. Launch Euro Truck Simulator 2 (ETS2) or American Truck Simulator (ATS).
  2. Navigate to Options → Controls.
  3. Under the "Keyboard" section, select the name of your connected joystick controller (the USB Gearshift Knob).
  4. Set the Transmission to H-Shifter.
  5. Select the Shifter layout:
    • For ETS2: Choose "27/16 speeds"
    • For ATS: Choose "Eaton Fuller 18 speeds"
  6. Set Shifter layout behavior to Advanced.
  7. For Shifter fast split (advanced only), select Clutch or throttle. This allows you to switch between Low/High gears by depressing the clutch or releasing the throttle.
  8. Configure the Shifter Toggles:
    • For Shifter Toggle: 1 (Rang Selector), turn the rang selector to the upper position, then dial it back to the lower position.
    • For Shifter Toggle: 2 (Splitter), turn the splitter to the upper position, then dial it back to the lower position.
  9. Finally, tick the "Shifter Toggles use Switch Mode" checkbox.
Screenshot of in-game control settings for key binding and shifter setup in ETS2/ATS
Figure 5: In-game control settings for the Truck Gearshift Knob.

Operating Instructions

Once configured, use the shifter knob's toggles to control high and low gears, and the splitter function within your truck simulation game. The custom setting button (Joy Button 3) can be assigned to any desired function in-game.

  • Shifter Toggle 1 (Rang Selector): Used for selecting gear ranges (e.g., high/low).
  • Shifter Toggle 2 (Splitter): Used for splitting gears within a range.
  • Joy Button 1, 2, 3: These are programmable buttons that can be assigned to various in-game functions, suchs as engine brake, differential lock, etc.

Troubleshooting

Issue: Unable to bind key

Solution:

  1. Check if the "Truck Gearshift Knob" device is enabled in the "Control" page of the game.
  2. Ensure all other enabled devices in the game are connected to the computer. If other enabled devices are connected but still prevent key binding, try disabling them (set to "None" in the enabled device bar) and then attempt key binding again.

Issue: The state of the device is inconsistent with the state in the game

Solution:

Since these games are not supported by SDK and cannot directly read the state of the game, simply flip the physical switch on the shifter knob to synchronize its state.

Maintenance

To ensure the longevity and optimal performance of your USB Gearshift Knob, follow these simple maintenance guidelines:

  • Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to extreme temperatures or moisture.
  • Do not attempt to disassemble the unit, as this may void any potential warranty and could cause damage.

User Tips

  • Many users report excellent build quality and durability, enhancing the overall gaming experience.
  • The shifter significantly improves immersion in Euro Truck Simulator 2 and American Truck Simulator.
  • The product includes various adapters, ensuring compatibility with a wide range of existing shifters like Logitech G29 and Moza HGP.
  • Some users appreciate the integrated engine brake button on the shifter, which can be a convenient feature.
  • Be aware that the knob might be taller than standard shifters, which could affect desk-mounted setups.

Warranty and Support

For any issues or questions not covered in this manual, please refer to the seller's support channels. Keep your purchase receipt for warranty claims.

A PDF user manual is available for download from the product page for additional reference: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.