PARKSON SMD 2835

Contents

PARKSON 50W SMD 2835 Smart IC LED Floodlight Chip User Manual

Model: SMD 2835 | Brand: PARKSON

Introduction

This manual provides essential information for the safe and effective use of your PARKSON 50W SMD 2835 Smart IC LED Floodlight Chip. Designed for various lighting applications, including outdoor DIY projects, this LED chip integrates a Smart IC, eliminating the need for an additional external driver. Please read these instructions carefully before installation and operation.

Two 50W LED lamp beads with Smart IC, showing the product packaging.
Figure 1: PARKSON 50W SMD 2835 Smart IC LED Floodlight Chips (2 pieces).

Safety Warnings

Failure to follow these safety warnings may result in electric shock, fire, or serious injury.

  • Only use a power supply that matches the rated voltage (AC 110V-240V) to prevent damage or fire caused by overvoltage or undervoltage.
  • Disconnect the power supply before installation. Never operate the device while it is powered on.
  • Do not use the product in damp, high-temperature, or flammable/explosive environments.
  • Keep the product out of reach of children to prevent accidental ingestion or contact.

Setup and Installation

The PARKSON 50W LED Lamp bead features a built-in Smart IC, meaning no additional external LED driver is required. It can be directly connected to an AC 110V-240V power supply.

Wiring Instructions:

  1. Ensure the power supply is disconnected before beginning installation.
  2. Connect the Red wire to the L (Live/Line) terminal of your AC power supply.
  3. Connect the Blue wire to the N (Neutral) terminal of your AC power supply.
  4. Once wiring is complete and secure, you may reconnect the power supply.
Diagram showing the wiring connections for the LED chip: Red wire to Live, Blue wire to Neutral, for AC 110V-240V.
Figure 2: Wiring diagram for the 50W LED chip. No additional driver required.
Image illustrating the Smart IC chip integration, showing a traditional LED driver next to the LED chip with integrated Smart IC, labeled 'Two-in-one'.
Figure 3: Smart IC Chip integration, simplifying installation by eliminating the need for an external LED driver.

Operating Instructions

After successful installation, simply apply power to the connected circuit to illuminate the LED chip. The chip is available in various emitting colors to suit different applications:

  • Warm White (2800-3200K): Ideal for creating a warm and inviting ambiance, suitable for cafes, bars, or home lighting.
  • Cold White (6000-6500K): Provides a higher lumen output and excellent color rendering, widely used for general illumination in various settings.
  • Grow Light: Specifically designed for plant growth applications, emitting a spectrum beneficial for photosynthesis.
Video 1: Demonstration of different emitting colors (Warm White, Cold White, and Grow Light) from the LED chips.
Comparison image showing Warm White light (2800-3200K) illuminating a garage and Cold White light (6000-6500K) illuminating a house exterior.
Figure 4: Visual comparison of Warm White and Cold White lighting in outdoor settings.
Image showing a plant under a purple grow light, demonstrating the Grow Light application.
Figure 5: Example of the LED chip used as a Grow Light for plants.

Maintenance

The PARKSON LED Floodlight Chip is designed for long-lasting performance with minimal maintenance. To ensure optimal operation and extend its lifespan:

  • Keep the LED chip clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Avoid exposing the chip to excessive moisture or direct water spray unless it is housed in a properly sealed, waterproof fixture.
  • Ensure adequate ventilation around the LED chip, especially when integrated into a fixture, to prevent overheating.
  • Do not attempt to disassemble or modify the LED chip, as this will void the warranty and may cause damage or injury.

Troubleshooting

If you encounter issues with your LED Floodlight Chip, please refer to the following common problems and solutions:

ProblemPossible CauseSolution
LED chip does not light up.No power, incorrect wiring, or faulty chip.
  • Check if the power supply is connected and active.
  • Verify that the Red (L) and Blue (N) wires are correctly connected to the AC power source.
  • Ensure the voltage is within the AC 110V-240V range.
  • If all connections are correct and power is present, the chip may be faulty.
Light flickers or is dim.Unstable power supply or poor connection.
  • Check the stability of your power source.
  • Inspect wiring connections for looseness or corrosion.
Chip overheats.Insufficient heat dissipation.
  • Ensure the LED chip is mounted on a suitable heatsink or within a fixture that provides adequate thermal management.
  • Avoid enclosing the chip in poorly ventilated spaces.

Specifications

FeatureDetail
BrandPARKSON
Model NumberSMD 2835 (Internal Part No: JZ50HD-165*62-25C28-9U)
Power50W
VoltageAC 110V-240V
LED Chip TypeSMD 2835
Beam Angle180°
Lifespan>50,000 hours
MaterialAluminum
Dimensions62mm x 165mm
Color Temperature OptionsCold White (6000-6500K), Warm White (2800-3200K), Grow Light
CertificationCE
FeaturesSmart IC (No external driver required), Wide Irradiation Range, No Strobe, Durable
Product parameters table showing dimensions, power, lifespan, beam angle, and color temperatures.
Figure 6: Detailed product parameters and dimensions.

User Tips

  • Heat Management: While some users report good performance without a heatsink in certain applications (e.g., kitchen use), for prolonged lifespan and optimal performance, especially in higher ambient temperatures or enclosed fixtures, consider using an appropriate heatsink.
  • DIY Projects: These LED chips are highly suitable for various DIY lighting projects due to their integrated Smart IC and direct AC input.
  • Brightness: Despite the small size of the diodes, these chips provide good illumination.

Frequently Asked Questions (FAQ)

Q: Does this LED chip require an external driver?
A: No, the PARKSON 50W SMD 2835 LED Floodlight Chip features a built-in Smart IC, allowing direct connection to AC 110V-240V power without an additional driver.
Q: What are the available color temperatures?
A: The chip is available in Warm White (2800-3200K), Cold White (6000-6500K), and a specific Grow Light spectrum for plant cultivation.
Q: What is the expected lifespan of the LED chip?
A: The LED chip has an estimated lifespan of over 50,000 hours under normal operating conditions.
Q: Can this LED chip be used outdoors?
A: Yes, it is designed for outdoor DIY floodlight applications. However, it must be housed within a suitable, weather-resistant fixture to protect it from environmental elements.

Warranty and Support

The PARKSON 50W SMD 2835 Smart IC LED Floodlight Chip comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact the seller or authorized distributor. Refer to the original product listing or packaging for specific contact details.

A detailed user manual in PDF format may also be available for download. Please check the product page for the link: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.