1. Introduction
Thank you for choosing the ONWA KP-27 Series Marine GPS Chart Plotter. This device is designed to provide reliable navigation information for recreational and light commercial marine applications. The KP-27 series offers ease-of-use, rugged design, and high reliability, ensuring safer and more enjoyable time on the water.
This manual provides detailed instructions for the installation, operation, and maintenance of your ONWA KP-27 GPS Chart Plotter. Please read this manual thoroughly before using the device to ensure proper operation and to prevent damage.
The KP-27 series includes several models: KP-27 (base model), KP-27A (with Class B+ AIS Transponder), KP-27F (with built-in Fish Finder), and KP-27X (with both Fish Finder and Class B+ AIS Transponder). While this manual primarily focuses on the KP-27 base model, features specific to other variants will be noted where applicable.
2. Package Contents
Please check the box for the following items:
- ONWA KP-27 Display Unit
- Mounting Bracket
- GPS Patch Antenna with 4m cable (SMA connector)
- Power/Data Cable
- Standard Accessories Pack (screws, nuts, washers)
- Quick Manual
- Protective Cover
3. Safety Information
- Always ensure the device is securely mounted to prevent injury or damage from vibration or impact.
- Connect the power cable to a stable DC power source within the specified voltage range (10.5 to 35 VDC). Incorrect voltage can damage the unit.
- Do not open the unit casing. There are no user-serviceable parts inside. Opening the casing will void the warranty.
- Keep the unit away from strong magnetic fields, which can interfere with its operation.
- Ensure all cable connections are secure and waterproofed where necessary to prevent water ingress.
- This device is a navigation aid. Always use official nautical charts and other navigation tools for safe navigation. Do not rely solely on this device.
4. Setup and Installation
4.1 Mounting the Display Unit
- Choose a suitable location on your vessel that is dry, protected from direct sunlight (though the unit is sunlight viewable), and allows for easy viewing and operation.
- Use the provided mounting bracket as a template to mark drilling points.
- Drill pilot holes and securely attach the mounting bracket to the chosen surface using the supplied screws and hardware.
- Attach the display unit to the mounting bracket and adjust the viewing angle as desired. Tighten the side knobs to secure the unit.
4.2 Interconnection Diagram
Refer to the diagram below for connecting power, GPS antenna, and other optional accessories.
Power Input: The unit requires a 10.5 to 35 VDC power supply. Connect the red wire to positive (+) and the black wire to negative (-) of your vessel's DC power system. Ensure proper fusing.
4.3 GPS Antenna Connection
Connect the supplied GPS Patch Antenna to the designated SMA connector on the rear of the display unit. Mount the GPS antenna in a location with a clear, unobstructed view of the sky for optimal satellite reception.
4.4 NMEA Interface
The KP-27 series supports NMEA0183 and NMEA2000 for data communication with other marine electronics. Refer to the interconnection diagram for NMEA wiring. The unit supports various NMEA sentences for input and output (see Specifications section for details).
4.5 Optional Accessory Connections
- AIS Antenna (for KP-27A/X): Connect a VHF antenna to the AIS input.
- Fishfinder Transducer (for KP-27F/X): Connect a compatible dual-frequency (50/200KHz) transducer.
- External GPS Antenna (KA-07/KA-GC9A): Can be connected for enhanced GPS performance.
- N2K Network: Connect to an NMEA2000 network for integrated data sharing.
5. Operating Instructions
5.1 Power On/Off
Press and hold the power button (
) to turn the unit on or off. A short press of the power button may adjust backlight brightness.
5.2 Basic Navigation
- Waypoints: Create, save, and navigate to waypoints. The unit supports up to 12,000 user waypoints.
- Routes: Plan and follow routes consisting of multiple waypoints. Up to 30 routes with 170 points each can be stored.
- Tracks: Record your vessel's path. The unit can store 16,000 points automatic track log and 10 saved tracks (up to 16,000 track points each).
5.3 Display Modes
The KP-27 series offers various display modes to suit your navigation needs. Use the 'MODE' button to cycle through available displays.
- Plotter Mode: Displays your vessel's position on the chart.
- Compass Mode: Shows a digital compass display.
- Highway Mode: Provides a 3D perspective view towards your destination.
- Sounder Mode (KP-27F/X): Displays fish finder information.
- AIS Mode (KP-27A/X): Shows Automatic Identification System targets.
- Wind Mode: Displays wind data (requires external sensor).
- Satellite Mode: Shows GPS satellite status.
5.4 GPS Chart Plotter Features
The unit is compatible with multiple mapping systems:
- K-Chart Mapping System: Displays worldwide Electronic Charts for free.
- C-Map Max: Compatible with C-Map Max nautical charts.
- Navionics+: Compatible with Navionics+ charts, offering features like Nautical Charts, Sonar Charts, Highlight Shallow Area, Adjust Contour Density, and Shallow Fishing Range.
5.5 Built-in HD Fish Finder (KP-27F/X Models)
These models apply advanced Digital Fish Finder Technology:
- Dual Frequency: 50 and 200KHz (alternately transmitted).
- Automatic Range and Gain adjustment for cruising or fishing.
- Excellent sea-bed discrimination and identification of fish schools.
- 16 colors according to intensity to distinguish echo strength.
5.6 AIS Features (KP-27A/X Models)
These models include Class B+ AIS Transponder technology:
- SOTDMA Technology for reliable transmission.
- 5W Transmission Power for increased range and satellite reception.
- AIS targets are overlaid on the plotter screen, showing MMSI, location, and detailed ship information.
- AIS Target Tracking: Record tracks of AIS targets (manual selection, max 10 targets/records). Recorded tracks can be saved as a route.
- CPA and TCPA Alarm: Alerts the user to nearby vessels to prevent collisions.
- Vessel List: Shows nearby vessels, distance, and detailed information.
5.7 Alarms
The unit features various alarms to enhance safety and awareness:
- XTE Alarm: Cross Track Error alarm.
- Anchor Drag Alarm: Alerts if the vessel drifts outside a set radius.
- Arrival Alarm: Notifies when approaching a waypoint or destination.
- Speed Alarm: Alerts if speed exceeds or falls below set limits.
- Voltage Alarm: Warns of abnormal power supply voltage.
- Waypoint Proximity Alarm: Alerts when near a waypoint.
- Timer Alarm: User-set timer.
- AIS Alarms (CPA/TCPA): Collision avoidance alarms for AIS targets.
- Fish Alarm (KP-27F/X): Alarms when fish are seen at a set range.
- Bottom Alarm (KP-27F/X): Alarms when the set bottom range is reached.
- Temperature Alarm (KP-27F/X): Warns when water temperature reaches a set range (requires temperature sensor).
5.8 Zoom Modes
The fish finder display (KP-27F/X) offers different zoom options:
- Marker Zoom: Zooms and displays a selected marker area on the left side of the screen.
- Bottom Lock Zoom: Locks the bottom display to provide a magnified view of the area just above the seabed.
- Bottom Zoom: Magnifies the entire bottom area.
6. Maintenance
- Cleaning: Clean the display screen with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they can damage the screen coating.
- Connections: Periodically check all cable connections for corrosion or looseness. Ensure waterproof seals are intact.
- Storage: When not in use for extended periods, store the unit in a dry, cool place. Use the protective cover to shield the screen from dust and scratches.
- Software Updates: Check the manufacturer's website for any available software updates to ensure optimal performance and access to new features. Updates can typically be performed via SD card.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on | No power supply; Blown fuse; Loose connection | Check power cable connection; Check vessel's fuse; Ensure power source is active. |
| No GPS signal | Antenna not connected; Antenna obstructed; Faulty antenna | Ensure GPS antenna is securely connected; Relocate antenna to clear view of sky; Test with another antenna if available. |
| Inaccurate position | Poor GPS reception; Incorrect datum setting | Ensure clear sky view for antenna; Check datum settings in system menu (default WGS 84). |
| No fish finder display (KP-27F/X) | Transducer not connected; Faulty transducer; Incorrect settings | Check transducer connection; Ensure transducer is in water; Verify fish finder settings (frequency, range). |
| No AIS targets (KP-27A/X) | AIS antenna not connected; No AIS traffic in area; AIS settings incorrect | Check AIS antenna connection; Ensure AIS is enabled in settings; Verify VHF antenna is properly installed. |
8. Specifications
Below are the detailed specifications for the ONWA KP-27 series. Note that some features are model-dependent.
8.1 General
- Display: 7-inch Color TFT dayview LCD, 800x480 pixels
- LCD Brightness: 1000 nit (Sunlight Viewable)
- Waterproofing: Display unit: IP66, Antenna unit: IP66
- Temperature Range: Display unit: -15°C to +55°C, Antenna unit: -25°C to +70°C
- Power Supply: 10.5 to 35 VDC, Current drain <1.0A at 12V
- NMEA Interface: NMEA0183, NMEA2000
8.2 GPS Receiver
- Receiver: 50 parallel channel GNSS receiver
- Acquisition Time: Cold start: 29 seconds, Hot start: 1 second
- Update Rate: 1 second
- Accuracy: Position: 3 meters (95%) without S/A, Velocity: 0.1 meter/sec without S/A
- SBAS: Supported
- Satellite System: GPS and BeiDou (Choice of 4 GNSS: GPS, BeiDou, Glonass, Galileo)
- Datum: WGS 84 & User defined
8.3 Plotter Features
- Waypoints: 12,000 user waypoints
- Routes: 30 routes, 170 points each
- Tracks: 16,000 points automatic track log, 10 saved tracks
- Alarms: XTE, Anchor drag, Arrival, Speed, Voltage, Waypoint proximity, Timer, AIS (CPA and TCPA)
- Mapping: K-Chart, C-Map Max, Navionics+ compatible
8.4 AIS Characteristics (KP-27A/X)
- Frequency Rate: 156.025 MHz - 162.025 MHz
- Access Scheme: SOTDMA
- TX Power Output: > 5 Watt (37dBm ± 1.5 dB)
- RX Sensitivity: >123dBm @ 20% PER
- AIS Channels: CH 87B (161.975 MHz), CH 88B (162.025 MHz)
8.5 Echo Sounder (KP-27F/X)
- TX Frequency: 50 and 200KHz (alternately transmitted)
- Power Output: 600W
- Echo Color: 16 colors
- Alarms: Fish, Bottom, Temperature (sensor required)
8.6 Physical Dimensions
- Size (KP-27): 155.1(H)mm x 241.3mm(W) x 62.9mm(D)
- Weight (KP-27): 1.3Kg
9. Warranty and Support
ONWA products are engineered for quality and reliability. For warranty information, technical support, or service inquiries, please contact your authorized ONWA dealer or visit the official ONWA Marine Electronics website. Please have your product model and serial number ready when contacting support.
For the latest information and software updates, please visit: