Introduction
Thank you for choosing MICTUNING Q1 MAX White Rock Lights. This manual provides essential information for the proper installation, operation, and maintenance of your new rock lights. Please read it thoroughly before installation and keep it for future reference.
MICTUNING is dedicated to leading the global automotive modification industry with a philosophy of "innovative, reliable, fun". Our products, including LED lights and RV accessories, are certified with CE, FCC, and RoHS, and backed by over 20 patents, ensuring quality and reliability.
Package Contents
The MICTUNING Q1 MAX Rock Lights are available in various configurations. Please verify the contents of your package against the table below:
| Accessories | 4 Pods | 8 Pods | 12 Pods | 16 Pods |
|---|---|---|---|---|
| Rock Lights | 4 | 8 | 12 | 16 |
| Mounting Hardware | 8 | 16 | 24 | 32 |
Note: The quantity of rock lights and mounting hardware will vary based on the specific package (4, 8, 12, or 16 pods) you purchased.
Product Features
- Pure White Light: Each pod features 24 Ultra-Bright LEDs, delivering 4W of power and 400 lumens for powerful illumination with a 160-degree beam angle.
- Durable Construction: Designed with a shake-proof rubber base, aluminum base, seal frame, PC cover, and aluminum housing for robust quality and modern style.
- All-Weather Suitable: IP68 waterproof rating ensures reliable performance in various environmental conditions, with a lifespan exceeding 50,000 hours.
- Versatile Application: Compatible with 12V/24V systems, suitable for cars, trucks, off-road vehicles, and boats.
Installation
The MICTUNING Q1 MAX Rock Lights are designed for easy mounting in various locations on your vehicle. Follow these steps for proper installation:
- Choose Mounting Location: Select a suitable flat surface on your vehicle's undercarriage, wheel wells, or other desired areas. Ensure the location allows for proper light dispersion and cable routing.
- Mark and Drill: Use the provided mounting hardware as a template to mark the drilling points. Drill pilot holes for the screws.
- Secure the Light Pod: Place the rock light pod with its shake-proof rubber base against the marked surface. Secure it firmly using the provided screws.
- Route Wiring: Carefully route the power cables from each light pod towards your vehicle's power source (e.g., battery, fuse box). Ensure cables are protected from heat, sharp edges, and moving parts.
- Connect Wiring: Refer to the wiring diagram below for correct electrical connections. Connect the positive (+) wire to a switched 12V/24V power source and the negative (-) wire to a reliable ground point.
Wiring Diagram Details:
- The red wire is for the positive (+) connection.
- The black wire is for the negative (-) or ground connection.
- Ensure all connections are secure and insulated to prevent short circuits.
Operation
Once installed and wired correctly, operating your MICTUNING Q1 MAX Rock Lights is straightforward:
- Power On: Activate the switch connected to your rock lights' power source. The lights should illuminate with a pure white glow.
- Power Off: Deactivate the switch to turn off the lights.
These lights are designed for continuous illumination, providing enhanced visibility and aesthetic appeal for your vehicle.
Maintenance
To ensure the longevity and optimal performance of your MICTUNING Q1 MAX Rock Lights, follow these simple maintenance guidelines:
- Regular Cleaning: Periodically clean the light pods with a soft cloth and mild soap solution to remove dirt, mud, or road grime. Avoid abrasive cleaners that could scratch the PC cover.
- Inspect Wiring: Regularly check all wiring connections for any signs of wear, corrosion, or damage. Ensure connections remain secure and insulated.
- Check Mounting: Verify that all light pods are securely mounted and that the mounting hardware is tight.
- Waterproof Integrity: While the lights are IP68 waterproof, avoid directing high-pressure water jets directly at the light seals during cleaning, especially if the seals appear compromised.
Troubleshooting
If you encounter issues with your MICTUNING Q1 MAX Rock Lights, refer to the following troubleshooting tips:
- Lights Not Turning On:
- Check the power switch to ensure it is in the "ON" position.
- Verify all wiring connections (positive, negative, and ground) are secure and free from corrosion.
- Inspect the fuse in your vehicle's circuit for the lights; replace if blown.
- Ensure the vehicle's battery has sufficient voltage (12V or 24V, depending on your system).
- Lights Flickering:
- Check for loose wiring connections.
- Ensure a stable power supply from your vehicle.
- One or More Pods Not Working:
- Inspect the wiring specific to the non-functioning pod(s).
- Ensure the pod itself is not physically damaged.
If these steps do not resolve the issue, please contact MICTUNING customer support for further assistance.
Specifications
| Parameter | Value |
|---|---|
| Brand Name | MICTUNING |
| Model | Q1 MAX Rock Lights |
| Item Type | Atmosphere lamp / Underglow Lights |
| Input Voltage | 10V-30V DC (Compatible with 12V / 24V systems) |
| Power per Pod | 4W |
| Lumen per Pod | 400LM |
| LEDs per Pod | 24 Ultra-Bright LEDs |
| Beam Angle | 160° |
| Operating Temperature | -20°C to 50°C |
| IP Grade | IP68 Waterproof |
| Lifespan | 50,000+ Hours |
| Package Weight | 1.3 kg |
| Package Dimensions (L x W x H) | 17 cm x 10 cm x 6 cm |
| Origin | Mainland China |
User Tips
- For optimal light spread, consider mounting the pods evenly around the vehicle's perimeter.
- When installing, ensure all wiring is neatly tucked away and secured to prevent snagging or damage during off-road use.
- If connecting to a vehicle's existing lighting circuit, ensure the circuit can handle the additional current draw of the rock lights.
Warranty and Support
MICTUNING stands behind the quality of its products. We offer lifetime customer support and aim for a response within 4 hours for any inquiries.
For further assistance, please contact us:
- Website: www.mictuning.com
- Email: support@mictuning.com
- Social Media:
- Facebook: @MICTUNING
- YouTube: @MICTUNING
- Instagram: @MICTUNING2
- Pinterest: @MICTUNING
You can also refer to the official user manual PDF for additional details: View User Manual (PDF)