1. Introduction
This manual provides detailed instructions for the installation, setup, operation, and maintenance of your Tuya ZigBee Door Window Sensor. This smart magnetic alarm detector is designed to enhance home security by providing real-time alerts for unexpected door or window openings. It integrates with the Tuya Smart Life app and is compatible with voice assistants like Amazon Alexa and Google Assistant.
Please read this manual carefully before use and keep it for future reference.
2. Safety Information
- Do not expose the device to extreme temperatures or humidity.
- Keep the device away from water and other liquids.
- Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.
- Use only the specified battery type (LR03).
- Dispose of batteries properly according to local regulations.
- Ensure the device is securely mounted to prevent accidental detachment.
3. Package Contents
Verify that all items are present in your package:
- Tuya ZigBee Door Window Sensor (Main unit and magnet)
- Mounting accessories (e.g., double-sided adhesive pads, screws)
- User Manual (this document)
- Button pin (for reset/pairing)
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | Smart Door And Window Sensor |
| Input Voltage | DC3V LR03 (AAA battery) |
| Quiescent Current | <10uA |
| Alarm Current | <160mA |
| Low Power Undervoltage | 2.7V |
| Wireless Type | ZigBee (Note: Requires a ZigBee gateway) |
| Magnetic Control Distance | ≤15mm |
| Working Temperature | -10°C to 50°C |
| Working Humidity | Max 95%RH |
| Certification | CE |
5. Setup
5.1. Battery Installation
- Push the mounting bracket upward and take out the bracket.
- Insert the battery (LR03 AAA) into the battery compartment, ensuring correct polarity as indicated by the graphics inside the battery bin.
- After two batteries are loaded, the indicator lights will turn on briefly and then off.
5.2. App Installation and Account Registration
- Scan the QR code below with your smartphone, or search for "Smart Life" app in Google Play Store or Apple App Store to download and install the app.
- Register an account with your email address, then click "Home" "+" on the app interface or click "Add Device".
5.3. Network Connection (ZigBee Gateway Required)
Important: This device only works with a ZigBee Gateway. You need to connect your ZigBee gateway to your Wi-Fi network successfully before adding this sensor. Ensure your Wi-Fi is 2.4GHz.
Adding the ZigBee Door Sensor:
- First, ensure your ZigBee gateway is already connected to the Smart Life app.
- In the Smart Life app, navigate to your ZigBee gateway and click "Add subdevice".
- Long press the reset button on the Door Sensor (using the button pin) for 3-5 seconds until the LED indicator flashes rapidly.
- The app will then search for the device. Once found, it will be added successfully.
- After successful addition, click the sensor icon in the app to enter its interface and configure settings.
For a visual guide, please refer to the setup video:
5.4. Physical Installation
Mount the main sensor unit and the magnet unit on your door/window frame and the moving part, respectively. Ensure the two parts are aligned and the gap between them is no more than 15mm when the door/window is closed.
6. Operating Instructions
6.1. Real-Time Notifications
Once connected, the sensor will send instant alerts to your Smart Life app when a door or window is opened or closed. This provides real-time monitoring of your home's entry points.
6.2. Low Power Warning
The sensor monitors its battery level. When the power is low (below 2.7V), the Smart Life app will push messages to remind you to replace the batteries in time.
6.3. Voice Control (Alexa/Google Assistant)
The sensor is compatible with Amazon Alexa and Google Assistant. Once integrated with your smart home system, you can use voice commands to check the status of your doors and windows.
7. Maintenance
7.1. Battery Replacement
When the low power warning is received, replace the LR03 AAA batteries promptly to ensure continuous operation. Follow the battery installation steps in Section 5.1.
7.2. Cleaning
Wipe the sensor with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the device.
8. Troubleshooting
- Sensor not connecting to app:
- Ensure your ZigBee gateway is properly set up and connected to your 2.4GHz Wi-Fi network.
- Verify the sensor batteries are correctly installed and not depleted.
- Make sure the sensor is within range of the ZigBee gateway.
- Perform the reset/pairing process again (long press the button pin for 3-5 seconds).
- No real-time notifications:
- Check your smartphone's app permissions for the Smart Life app. Ensure notifications are enabled, including floating notifications and lock screen notifications.
- Verify that "Door Alarm" and "Closing reminder" settings are enabled within the sensor's settings in the Smart Life app.
- Ensure the app is not restricted by battery saver or auto-start settings on your mobile device.
- Sensor reports continuous state changes (noisy):
- Ensure the main unit and magnet are securely mounted and do not shift.
- Verify the magnetic control distance is within the specified ≤15mm. A larger gap can cause unreliable readings.
- Check for any magnetic interference from nearby objects.
- Alexa/Google Assistant not recognizing the device:
- Ensure the Smart Life skill/service is enabled and linked in your Alexa or Google Home app.
- Try rediscovering devices in your Alexa or Google Home app.
- Confirm that the sensor is properly added and functioning within the Smart Life app first.
- High battery consumption:
- Ensure the sensor is not in an area with weak ZigBee signal, as constant re-connection attempts can drain the battery.
- Check for frequent false triggers if the sensor is "noisy" (see above point).
9. User Tips
- For a discreet installation, consider drilling small pockets in the top of your door frame to embed the sensor units, making them invisible when the door is closed.
- This sensor is reported to work well with Zigbee Home Automation (ZHA) or Zigbee2MQTT (Z2M) in Home Assistant setups, often without needing the Tuya gateway directly for integration.
- Always double-check app permissions on your mobile device to ensure notifications are not blocked by system settings.
- The response time for opening/closing events is generally very fast, providing instant alerts.
10. Warranty and Support
For warranty information and further technical support, please refer to the official product page or contact the seller directly. A detailed user manual in PDF format may also be available for download from the product's online listing.
You can find the PDF manual here.