MiLESEEY B49C Audio Decoder

Contents

B49C Audio Decoder 7.1 Channels User Manual

Model: B49C Audio Decoder

1. Introduction

Thank you for choosing the B49C Audio Decoder. This device is designed to extract and decode audio signals from eARC or Optical inputs, providing versatile output options including 7.1 channel RCA, HD audio, and 3.5mm stereo. It supports a wide range of audio formats, ensuring a rich audio-visual experience. Please read this manual carefully before use to ensure proper installation and operation.

Front view of the B49C Audio Decoder, labeled as an eARC/Optical Audio Extractor.
Figure 1: B49C Audio Decoder (eARC/Optical Audio Extractor)

2. Safety Information and Warnings

  • This product is intended for adult use only.
  • Keep out of reach of children and pets to prevent accidental injury or ingestion.
  • Always check that the installation is correct before powering on the device.
  • If you notice any abnormal noise or equipment error after installation, immediately stop using the device and disconnect the power.
  • Follow all instructions for proper use. Misuse may cause harm.
  • Store the product in a dry and shady place, away from high temperatures, humidity, and direct sunlight.

3. Package Contents

Please check the package for the following items:

  • 1 x B49C Audio Decoder
  • 1 x HDMI Cable
  • 1 x Power Cord (Type-C)

Note: Other products shown in promotional images are not included. The color of the item in the picture may vary slightly from the real product due to light reflection and different displays. A measurement error of +/- 1-3cm is allowed.

4. Product Overview

The B49C Audio Decoder features multiple input and output ports for comprehensive audio connectivity. Familiarize yourself with the device's interfaces:

Diagram of the B49C Audio Decoder's front and rear interfaces, showing power input, eARC TV input, Optical input, HD audio output, 3.5mm stereo output, and RCA 7.1 channel outputs (FL, FR, SL, SR, C, SW), along with power switch, input selector, and indicator lights.
Figure 2: Interface Description

Front Panel Controls:

  • Audio EDID Switch: Selects between 2.0 (stereo) and PASS (passthrough) modes.
  • Input Selector Switch: Toggles between Optical and eARC inputs.
  • Indicator Lights: Displays current input (2.0/5.1/7.1) and eARC status.
  • Power Switch: ON/OFF toggle for the device.
  • Power Supply Indicator Light: Indicates power status.

Rear Panel Ports:

  • DC 5V (Power Supply Input): Connect the provided Type-C power cord.
  • eARC TV (eARC Input): Connect to your TV's eARC HDMI port.
  • Optical (Optical Fiber Input): Connect to an optical audio source.
  • Amplifier (HD Audio Output): HDMI output for audio only.
  • 3.5mm Stereo Output: For headphones or stereo speakers.
  • FL, FR, SL, SR, C, SW (RCA Output Interface): 7.1 channel RCA outputs for Front Left, Front Right, Surround Left, Surround Right, Center, and Subwoofer channels.
Angled view of the eARC/Optical Digital Audio Extractor, showcasing its compact design and various input/output ports.
Figure 3: B49C Audio Decoder with Ports Visible

5. Specifications

Feature Detail
Product Name TV Optical Fiber EARC5.1 Audio Decoder Supports HDMI-Compatible Output 7.1 Channels to Connect to Power Amplifier Audio
HD Input Port eARC x 1; Optical Fiber x 1
HD Output Version HD 1.4
HD Output Resolution 720P (HD port transmits audio only, not video)
Power Supply Type-C
Output Ports HD x 1, RCA x 6, 3.5mm x 1
Supported Audio Formats PCM, AC3, DTS, DD+, DTS-HD Master Audio, DOLBY True HD
Power Supply Voltage/Consumption DC5V/450mA
Operating Temperature -40°C to +85°C
Operating Humidity 30% to 75% RH (non-condensing)
Storage Temperature -60°C to +95°C
Storage Humidity 40% to 85% RH (non-condensing)
Color Black
Material Aluminum Alloy
PCM Word Length 16-bit
PCM Sampling Frequencies 44.1 kHz
DSD Sampling Frequencies NONE
Close-up image of an audio processing chip, representing the professional-grade audio operational amplifier chip within the decoder for clear sound quality.
Figure 4: Internal Audio Processing Chip

6. Setup Instructions

Follow these steps to set up your B49C Audio Decoder:

  1. Connect Power: Connect the provided Type-C power cord to the DC 5V port on the decoder and plug the other end into a suitable power adapter (not included). The power indicator light should illuminate.
  2. Connect Audio Input:
    • eARC Input: Use an HDMI cable to connect your TV's eARC HDMI port to the eARC TV input port on the decoder.
    • Optical Input: Use an optical fiber cable to connect your audio source (e.g., Blu-ray player, game console) to the Optical input port on the decoder.
  3. Connect Audio Output:
    • 7.1 Channel RCA Output: Connect your 7.1 channel amplifier or active speakers to the FL, FR, SL, SR, C, and SW RCA output ports using appropriate RCA cables.
    • HD Audio Output: Use an HDMI cable to connect the Amplifier (HD Audio Output) port to an HDMI audio receiver or soundbar. Note that this port transmits audio only.
    • 3.5mm Stereo Output: Connect headphones or stereo speakers to the 3.5mm output jack.
  4. Select Input Source: Use the Input Selector Switch on the front panel to choose between "Optical" or "eARC" based on your connected audio source.
  5. Configure Audio EDID: Use the Audio EDID switch to select "2.0" for stereo output or "PASS" for passthrough, allowing the connected device to handle the audio format negotiation.
Illustration of the B49C Audio Decoder connected to a 7.1 channel speaker system, demonstrating its multi-channel audio output capability.
Figure 5: Example 7.1 Channel Speaker Setup
Diagram detailing compatible input modes (eARC, Optical, RCA-5.1, HD Audio) and output channels (7.1 channels), highlighting that the device processes audio signals only.
Figure 6: Compatible Input and Output Modes

7. Operating Instructions

  1. Power On/Off: Use the ON/OFF switch on the front panel to power the device on or off. Ensure all connections are secure before powering on.
  2. Input Selection: After connecting your audio source(s), use the Input Selector Switch to choose the active input (Optical or eARC). The corresponding indicator light will show the active channel configuration (2.0, 5.1, or 7.1).
  3. Audio Format Compatibility: The decoder supports various audio formats including PCM, AC3, DTS, DD+, DTS-HD Master Audio, and DOLBY True HD. Ensure your source device is configured to output one of these formats for optimal performance.
  4. Volume Control: When using ARC/eARC, the output volume for RCA and 3.5mm headphones can be controlled via your television (CEC function). For other outputs, volume control will typically be managed by the connected amplifier or receiver.

8. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
  • Storage: When not in use for extended periods, store the product in a dry, shady place, away from extreme temperatures, high humidity, and direct sunlight.
  • Handling: Handle the device with care to avoid physical damage.

9. Troubleshooting

If you encounter issues, please refer to the following common troubleshooting steps:

  • No Audio Output:
    • Ensure the power cord is securely connected and the device is powered on.
    • Verify that the correct input source (eARC or Optical) is selected on the decoder.
    • Check all audio cables (HDMI, Optical, RCA, 3.5mm) for secure connections.
    • Confirm that your source device is outputting a supported audio format.
    • Check the Audio EDID switch setting. Try both "2.0" and "PASS" modes.
    • Ensure your connected amplifier/speakers are powered on and set to the correct input.
  • Abnormal Noise or Distortion:
    • Immediately power off the device.
    • Check all cable connections for looseness or damage.
    • Ensure the audio source is not distorted.
    • Try a different audio cable or input source to isolate the problem.
  • Remote Control Issues (if applicable):
    • Ensure there are no obstructions between the remote and the device.
    • Check and replace batteries if necessary.

If the problem persists after trying these steps, please contact customer support.

10. User Tips

  • For the best audio experience, ensure your source device and connected audio system are compatible with the desired audio formats (e.g., Dolby TrueHD, DTS-HD Master Audio).
  • When connecting to a TV via eARC, utilize the TV's CEC function for integrated volume control if available.
  • Always use high-quality cables to minimize signal loss and interference.

11. Warranty and Support

For any product-related inquiries or support, please contact the manufacturer or their authorized representative:

  • Manufacturer: Taiyuan liyishu technology co., ltd, Room 1207, 12th floor, Building 6, Huida International, No.199 wulongkou Street, Yangqu Industrial Park, Shanxi Transformation Comprehensive Reform Demonstration Zone Code: 030000.
  • EU Authorized Representative: CET PRODUCT SERVICE LTD., Osterholzallee 144, info@cetproduct.com / +49 15738616277

For a complete digital version of this user manual, please refer to the PDF document available at: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.