TUMMASTER AK350/AK390

Contents

ARGB Water Cooling Tube Light Cover Instruction Manual

Brand: TUMMASTER | Models: AK350/AK390

1. Introduction

Thank you for choosing the TUMMASTER ARGB Water Cooling Tube Light Cover. This product is designed to enhance the aesthetic appeal of your PC's liquid cooling system with vibrant Addressable RGB (ARGB) lighting. Made from soft, durable silicone, these light covers are easy to install and compatible with various motherboard synchronization technologies. Please read this manual carefully before installation and use to ensure proper setup and enjoyment of your new product.

2. Product Overview

2.1 Package Contents

Product List: Contents of the package including a color box, two ARGB light-emitting tubes, and ten transparent buckles.
Figure 1: Package Contents - Color box, two ARGB light-emitting tubes, and ten transparent buckles.
  • Color Box (x1)
  • ARGB Light-Emitting Tube (x2)
  • Transparent Buckles (x10)
  • Mini ARGB Controller (may be included as a gift, refer to product packaging)

2.2 Key Features

  • Vibrant ARGB Lighting: Enhances your PC's aesthetics with dynamic and customizable lighting effects.
  • Durable Silicone Material: Features strong light conductivity, softness, and durability, providing a warm and bright 'jade-like' texture when illuminated.
  • Easy Installation: Soft silicone can be wrapped directly around water-cooling tubes and secured with snap fasteners.
  • Motherboard Sync Compatibility: Supports popular ARGB synchronization technologies including RGB Fusion, Aura Sync, Mystic Light Sync, and Polychrome Sync via a 5V 3PIN connector.
  • Independent Control: Includes a mini ARGB controller for systems without motherboard ARGB headers or for independent control.
Close-up of the silicone material of the ARGB tubes, highlighting its light conductivity and durability.
Figure 2: Silicone material properties and ARGB feature.
Diagram showing AK-350 and AK-390 ARGB tubes with their 5V 3PIN connectors and logos for RGB Fusion, Aura Sync, Mystic Light Sync, and Polychrome Sync.
Figure 3: AK350/AK390 models with 5V 3PIN ARGB connectors and motherboard sync compatibility.

2.3 Product Demonstration Video

Video 1: This video showcases the dynamic and colorful ARGB lighting effects of the water cooling tube light covers when installed in a computer system, highlighting various lighting patterns and synchronization with other components.

3. Specifications

Table 1: Product Specifications
Feature Detail
Brand Name TUMMASTER
Model Number AK350/AK390
Type Pump Modify Accessory
RGB Support A-RGB (5V 3PIN)
With Screen No
Support Pump Type Pump
Weight 301g
AK350 Length 345mm
For Tubes Length 36-40cm
For Tubes Diameter ≤12mm
Table of specifications for AK350 model: Length 345mm, For tubes length 36-40cm, For tubes diameter <=12mm. Also shows ARGB tubes and controller.
Figure 4: Model AK350 specifications and components.

4. Safety Information

  • Ensure your PC is powered off and unplugged from the wall outlet before installation.
  • Handle all components with care to avoid damage.
  • Do not force connectors. Ensure correct orientation before plugging in.
  • Only connect to a 5V 3PIN ARGB header. Connecting to a 12V RGB header will damage the product.
  • Keep out of reach of children.

5. Setup and Installation

The ARGB Water Cooling Tube Light Covers are designed for easy installation. Follow these steps:

  1. Prepare your system: Power off your computer and unplug it from the power source. Open your PC case to access the liquid cooling tubes.
  2. Identify compatible tubes: Ensure your liquid cooling tubes have a diameter of 12mm or less and a length between 36-40cm for optimal fit with the AK350 model (refer to specifications for AK390).
  3. Wrap the silicone covers: Gently wrap the soft silicone ARGB light covers directly around your liquid cooling tubes.
  4. Secure with buckles: Use the provided transparent snap fasteners (buckles) to secure the silicone covers firmly in place along the length of the tubes. This prevents them from falling off.
  5. Connect ARGB cable: Locate an available 5V 3PIN ARGB header on your motherboard or an ARGB controller. Connect the ARGB cable from the light covers to this header. If using the included mini ARGB controller, connect the light covers to the controller and then connect the controller to a SATA power connector from your power supply.
  6. Cable Management: Route the ARGB cables neatly to avoid interference with other components and to maintain good airflow.
  7. Close the case: Once all connections are secure and cables are managed, close your PC case.
  8. Power on: Plug in your PC and power it on.
Detailed installation diagram showing ARGB tubes being wrapped around liquid cooling hoses and secured with transparent clips, with wiring connections.
Figure 5: Visual guide for wrapping and securing ARGB tubes to liquid cooling hoses.

Note: The soft silicone material allows for easy installation by simply wrapping it around the tubes and securing it with the provided clips.

6. Operation

6.1 Controlling ARGB Effects

There are two primary ways to control the ARGB lighting effects:

  • Motherboard Synchronization: If connected to a 5V 3PIN ARGB header on your motherboard, you can control the lighting effects using your motherboard's dedicated RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync). This allows for synchronized lighting across all compatible components in your system.
  • Mini ARGB Controller: If your motherboard lacks a 5V 3PIN ARGB header or if you prefer independent control, use the included mini ARGB controller. This controller typically offers various preset lighting modes, colors, and effects that can be cycled through using its buttons.

Refer to your motherboard's manual or the mini controller's instructions (if applicable) for specific details on adjusting lighting modes and colors.

7. Maintenance

  • Cleaning: To clean the silicone light covers, gently wipe them with a soft, dry, or slightly damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the silicone or LED strips.
  • Handling: While the silicone is durable, avoid excessive bending or sharp folds that could stress the internal LED components.
  • Inspection: Periodically check the transparent buckles to ensure they remain securely fastened to the liquid cooling tubes.

8. Troubleshooting

  • Lights Not Turning On:
    • Ensure the 5V 3PIN ARGB connector is correctly and securely plugged into the motherboard header or the mini controller.
    • If using the mini controller, verify it is connected to a working SATA power connector from your PSU.
    • Check your motherboard's BIOS/UEFI settings or RGB software to ensure the ARGB header is enabled and configured correctly.
    • Confirm that the power supply to your PC is adequate.
  • Incorrect Colors or Effects:
    • If connected to the motherboard, ensure your RGB software is up-to-date and correctly detecting the device. Try resetting the lighting profile.
    • If using the mini controller, cycle through the available modes to see if the desired effect appears.
  • Tubes are Loose:
    • Re-secure the transparent buckles along the length of the silicone covers. Add more buckles if necessary to ensure a snug fit.

9. User Tips

  • Aesthetic Enhancement: These light covers are primarily for visual customization and do not impact the thermal performance of your liquid cooling system.
  • Customization: If the length of the silicone cover is slightly too long for your specific tubes, it can be carefully trimmed with a sharp utility knife to achieve a perfect fit.
  • Quantity: Each product package typically includes two hose covers, allowing for coverage of both tubes in a standard AIO liquid cooler setup.
  • RGB Settings: Explore the many RGB settings available through your motherboard software or the mini controller to find your preferred lighting style.

10. Warranty and Support

For any questions, technical assistance, or support regarding your TUMMASTER ARGB Water Cooling Tube Light Cover, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.

© 2024 TUMMASTER. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.