1. Introduction
Thank you for choosing the SUN UV LED Nail Lamp. This professional-grade nail lamp is designed for efficient and fast curing of all types of UV gel, builder gel, and LED gels. With advanced features like dual light sources, multiple timer settings, and an intelligent infrared sensor, it provides a superior nail curing experience. Please read this manual thoroughly before operation to ensure proper use and longevity of your device.
2. Package Contents and Parts Identification
2.1. Packing List
Upon unpacking, please ensure all items listed below are present:
- Nail Lamp: 1 unit
- DC Adapter: 1 unit
- User Manual: 1 copy
2.2. Parts Instruction
Familiarize yourself with the components of your nail lamp:
- Infrared Sensor: Detects hand insertion to automatically start/stop the lamp.
- Timer Screen: Digital display showing the remaining curing time.
- Timer Buttons: Buttons for selecting preset curing times (10S, 30S, 60S, 99S).
- Adapter Connector: Port for connecting the DC power adapter.
3. Setup
- Unpack: Carefully remove the nail lamp and all accessories from the packaging.
- Inspect: Check the device for any signs of damage. If damaged, do not use and contact support.
- Connect Power: Insert the DC adapter plug into the adapter connector port on the back of the nail lamp. Plug the adapter into a suitable electrical outlet (100-240V, 50/60Hz).
- Placement: Place the lamp on a stable, flat surface. Ensure there is adequate ventilation around the device.
4. Operating Instructions
4.1. Basic Operation
- Power On: Once plugged in, the lamp is in standby mode. The timer screen may show '000' or be off.
- Select Timer: Press one of the timer buttons (10S, 30S, 60S, 99S) according to your gel polish requirements. The selected time will appear on the timer screen.
- Automatic Sensor: If no timer button is pressed, simply place your hand or foot into the lamp. The infrared sensor will automatically detect it and start the curing process. The maximum working time in auto-sensor mode is 120 seconds.
- Start Curing: Place your hand or foot inside the lamp. The LEDs will illuminate, and the timer will begin counting down.
- Stop Curing: The lamp will automatically turn off when the timer reaches zero. You can also remove your hand/foot at any time to pause the curing process (if using auto-sensor mode) or to stop it.
- Standby Mode: If the timer is running and you press the active timer button again, the lamp will enter standby mode.
4.2. Timer Settings and Usage
- 10S: Ideal for thin gel polish layers.
- 30S: Suitable for thin regular gel polish.
- 60S: Recommended for dark colored or thick gel polish.
- 99S (Low Heat Mode): This mode gradually increases power to minimize heat sensation, providing a painless curing experience, especially for sensitive nails or builder gels.
4.3. Intelligent Features
- Infrared Sensor: Automatically turns the lamp on when hands/feet are inserted and off when removed.
- LCD Screen: Provides a clear countdown of the curing time.
- Dual Light Source (365nm+405nm): Ensures effective curing of all UV and LED gel types.
4.4. Hands and Feet Compatibility
The SUN UV LED Nail Lamp features a removable base plate, making it suitable for both manicures and pedicures. Simply detach the base for easy placement of feet.
5. Maintenance
5.1. Cleaning
- Always unplug the device before cleaning.
- Wipe the exterior of the lamp with a soft, dry cloth.
- For stubborn stains, a slightly damp cloth with mild soap can be used, then wipe dry immediately.
- Do not use abrasive cleaners, solvents, or allow any liquid to enter the machine, as this may cause damage.
5.2. Storage
- When not in use for an extended period, unplug the lamp from the power outlet.
- Store the lamp in a cool, dry place, away from direct sunlight and moisture.
- Keep out of reach of children.
6. Troubleshooting
If you encounter any issues with your nail lamp, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on | Not plugged in correctly; Power outlet issue; Adapter fault | Ensure adapter is securely connected and plugged into a working outlet. Try a different outlet. |
| Gels are not curing properly | Incorrect curing time; Gel type incompatibility; Too thick gel layer; Old/expired gel | Increase curing time. Ensure gel is compatible with UV/LED lamps. Apply thinner layers. Check gel expiration. |
| Lamp gets too hot | Prolonged continuous use; Poor ventilation | Allow the lamp to cool down between uses. Ensure proper airflow around the device. Use 99S low heat mode for sensitive nails. |
| Infrared sensor not working | Obstruction; Sensor malfunction | Ensure nothing is blocking the sensor area. If problem persists, use manual timer buttons. |
If the problem persists after trying these solutions, please contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Item Type | Nail Dryer |
| Model Number | UV LED NAIL LAMP (e.g., X25 MAX, X7 MAX) |
| Power Source | Electric |
| Maximum Power Consumption | Up to 380W (varies by model: 54W/80W/120W/150W/180W/220W/280W/320W/380W) |
| Lamp Beads | 81pcs (or 57pcs for some models) |
| Wave Length | 365nm + 405nm (Dual Light Source) |
| Voltage | 100-240V (Rated input for adapter) |
| Frequency | 50/60Hz |
| Material | ABS |
| Size | 210*185*104.5mm (approximate) |
| Weight | 490g (approximate) |
| Certification | CE |
| Is Batteries Included | No |
8. User Tips
- Efficient Curing: This lamp dries polish quickly and evenly, contributing to longer-lasting manicures.
- Ease of Use: The lamp is lightweight and features a comfortable design, making it easy to use for both hands and feet.
- Heat Management: The lamp generally does not generate excessive heat. For sensitive nails or thicker gels, utilize the 99S low heat mode to minimize any heat sensation.
- Skin Protection: As with any UV/LED nail lamp, it is advisable to apply SPF to your hands before use, especially during longer curing sessions, as the lamp is quite strong.
- Thin Layers: For best results, apply gel polish in thin, even layers. This ensures thorough curing and prevents bubbling or wrinkling.
9. Frequently Asked Questions (FAQ)
Q: What type of plug does this lamp come with?
A: The lamp is available with various plug types, including US, EU, UK, and AU. Please select the appropriate plug type for your region when purchasing.
Q: Does this lamp require batteries?
A: No, this nail lamp is electric and operates via a DC adapter. It does not require batteries.
Q: Which model is the largest?
A: While specific dimensions may vary slightly between models (e.g., X25 MAX vs. X7 MAX), the overall design is generally spacious enough to comfortably accommodate both hands or feet.
10. Cautions and Safety Information
- Please read this manual carefully before operating the device.
- Do not allow any liquid to enter the machine, as this may cause damage or electrical hazard.
- If you do not intend to use the machine for a long period, please unplug it from the power socket.
- Keep the device away from water and other liquids.
- Do not look directly into the UV/LED light during operation.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
11. Warranty and Support
Your SUN UV LED Nail Lamp is manufactured to high-quality standards. For any issues, questions, or support needs, please contact the seller or retailer from whom you purchased the product. Please retain your proof of purchase for warranty claims.