CNSPEED YC101879

Contents

User Manual

CNSPEED Universal 12V Car Exhaust Muffler Electric Valve Cutout System Remote Control Kit

Model: YC101879

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of your CNSPEED Universal 12V Car Exhaust Muffler Electric Valve Cutout System Remote Control Kit. This kit allows you to remotely open and close your vehicle's exhaust valve from inside the car, offering a convenient solution for auto enthusiasts and DIY projects. It is designed for universal 12V car applications and ensures no interference with the standard CAN bus system.

2. Safety Information

  • Always disconnect the vehicle's battery before performing any electrical installation to prevent short circuits or electrical shock.
  • Ensure all wiring connections are secure and properly insulated to avoid electrical hazards.
  • Mount the control unit in a dry location, away from excessive heat, moisture, and moving parts.
  • Professional installation is recommended for individuals unfamiliar with automotive electrical systems.
  • Do not operate the exhaust valve in a manner that could violate local noise regulations or vehicle modification laws.

3. Package Contents

Verify that all components are present in your kit:

Complete kit components including control unit, power cables, and two remote controls.
Figure 3.1: Overview of the Exhaust Cutout Controllers Kit components.
  • 1x Control Unit (black box)
  • 1x Power Cable with Cigarette Lighter Adapter
  • 2x Wireless Remote Controls
  • 1x Short DC Power Cable (for connecting control unit to exhaust valve motor)
  • 1x Long DC Power Cable (for connecting control unit to power source, if not using cigarette lighter)

4. Specifications

Feature Specification
Model Number YC101879
Application Universal 12V Car Exhaust Muffler Electric Valve Cutout System
Control Type Wireless Remote Control
Origin Mainland China
Package Weight 0.299 kg
Package Dimensions (L x W x H) 14 cm x 10 cm x 8 cm

5. Setup and Installation

The installation process is designed to be straightforward, but professional assistance is recommended for optimal results and safety.

  1. Mount the Control Unit: Choose a secure, dry location within the vehicle, such as under the dashboard or in the trunk, to mount the black control unit. Ensure it is protected from direct moisture and excessive heat.
    Close-up of the control unit showing input/output ports and 'Motor 12V' label.
    Figure 5.1: Control unit with 'Motor 12V' port for exhaust valve connection.
  2. Connect to Exhaust Valve Motor: Connect the short DC power cable from the control unit's 'Motor 12V' port to your electric exhaust valve motor. Ensure the polarity is correct if specified by your exhaust valve manufacturer.
    Control unit with short power cable connected.
    Figure 5.2: Short DC power cable connected to the control unit.
  3. Connect to 12V Power Source:
    • Option 1 (Cigarette Lighter): Plug the power cable with the cigarette lighter adapter into your vehicle's 12V cigarette lighter socket.
      Close-up of the cigarette lighter power cable.
      Figure 5.3: Cigarette lighter power cable.
    • Option 2 (Hardwired): If you prefer a permanent installation, use the long DC power cable to connect the control unit directly to a switched 12V power source in your vehicle's fuse box. Ensure proper fusing and consult a professional if unsure.
  4. Test Functionality: Once all connections are made, re-connect the vehicle's battery and proceed to the operation section to test the system.

6. Operation

The exhaust valve cutout system is operated using the provided wireless remote controls.

  • Each remote control typically has two buttons: one to open the exhaust valve and one to close it.
  • Press the 'Open' button to open the exhaust valve, allowing for a louder exhaust note.
  • Press the 'Close' button to close the exhaust valve, returning to a quieter exhaust note.
  • The system operates independently of your vehicle's drive select modes and is designed not to interfere with the standard CAN bus.

7. Maintenance

This remote control kit requires minimal maintenance. Follow these guidelines to ensure longevity:

  • Keep the control unit and remote controls dry and clean.
  • Periodically check all wiring connections for tightness and signs of wear or corrosion.
  • Replace remote control batteries as needed. (Battery type not specified, refer to the remote control casing for details).

8. Troubleshooting

Problem Possible Cause Solution
System does not respond to remote control. Remote control batteries are dead or missing. Ensure batteries are installed in the remote controls and replace them if necessary.
Exhaust valve does not open/close. No power to the control unit or loose connections. Check the 12V power connection (cigarette lighter or hardwired). Verify all wiring connections are secure.
Intermittent operation. Poor electrical connection or interference. Inspect all wiring for damage or corrosion. Ensure the control unit is not obstructed by metal objects that could block the remote signal.

9. User Tips

  • The kit is generally well-regarded for its quality and ease of assembly. Ensure all components are perfectly aligned during installation.
  • Always double-check the remote control batteries upon receiving the product, as they may not always be included or fully charged.

10. Warranty and Support

This product has undergone 100% quality assurance testing. For any issues, technical support, or warranty claims, please contact the seller directly.

A detailed user manual in PDF format may be available for further reference. You can typically find this document on the product's page or by contacting the seller. For your convenience, a PDF version of the user manual can be referenced at: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.