NHKUPOR Car Radio Multimedia Player Fascia for Great Wall Haval Hover H3 H5 X240

Contents

NHKUPOR Car Radio Multimedia Player Fascia Installation Manual

For Great Wall Haval Hover H3 (2010-2014), H5 (2010-2012), and X240 (2012+)

1. Product Overview

This high-quality ABS plastic fascia panel is designed to seamlessly integrate a 2 DIN car stereo (up to 9-inch or 10-inch screen) into your vehicle's dashboard. It provides a clean, OEM-style finish for your upgraded car audio system.

Front view of the 9-inch fascia frame, showing compatibility with Great Wall Haval Hover H3/H5 and X240, and a sample car dashboard.

Figure 1: NHKUPOR Fascia Frame for Great Wall Haval Hover H3/H5/X240

2. Specifications

FeatureDetail
Brand NameNHKUPOR
MaterialHigh Quality ABS Plastic
Placement on VehicleFRONT
Special FeaturesFills the gap between original car and head unit
StandardDouble 2 DIN
Inner Size (for 9-inch screen)230mm x 220mm x 130mm (fits most 9-inch universal radios)
Inner Size (for 10-inch screen)252mm x 242mm x 146mm (fits most standard 2 DIN head units)
Item Weight0.4 kg
Item Height13 cm
Item Width22 cm
Item Length23 cm
CompatibilityGreat Wall X240 (2012+), Great Wall Hover (Haval) H3 (2010-2014), Great Wall Hover (Haval) H5 (2010-2012)
Diagram showing the dimensions for a 9-inch universal radio (230mm x 130mm, with a 220mm inner width).

Figure 2: Inner Dimensions for 9-inch Universal Radio

3. Setup and Installation

This manual assumes basic knowledge of car stereo installation. Professional help is recommended for complex wiring.

3.1. Preparation

  1. Disconnect the negative battery terminal to prevent electrical shorts.
  2. Remove keys from the ignition and ensure the parking brake is engaged.

3.2. Remove Factory Panel

  1. Use a trim tool to gently pry off the original radio bezel.
  2. Unscrew/unclip the factory stereo and disconnect all wiring harnesses.

3.3. Install New Frame

  1. Align the 2 DIN frame with the dashboard opening.
  2. Secure the frame using the included brackets/clips. Tighten screws firmly but avoid over-torquing to prevent damage.
Rear view of the fascia frame, highlighting mounting points and structure.

Figure 3: Rear view of the fascia frame showing mounting points

3.4. Mount Your Stereo

  1. Slide the 2 DIN head unit into the newly installed frame, ensuring all ports (USB/AUX/etc.) are accessible.
  2. Connect all necessary wiring harnesses. It is highly recommended to use vehicle-specific adapters for plug-and-play compatibility to simplify wiring.

3.5. Reassembly

  1. Snap the frame into place, ensuring there are no gaps or misalignment.
  2. Reconnect the battery terminal.
  3. Test all stereo functions (power, speakers, steering controls if applicable) to ensure proper operation.

4. Operating

The NHKUPOR Car Radio Multimedia Player Fascia is a mounting frame designed to integrate an aftermarket head unit into your vehicle's dashboard. It does not have operational functions itself. Its purpose is to provide a secure and aesthetically pleasing housing for your 2 DIN car stereo, allowing the stereo to operate correctly within the vehicle's interior.

5. Maintenance

  • Do not force the frame during installation. If necessary, trim excess material from the dashboard opening to ensure a proper fit.
  • Avoid direct sunlight exposure for prolonged periods to prevent warping or discoloration of the plastic material.
  • Clean the fascia with a microfiber cloth and mild detergent. Do not use abrasive chemicals, as these can damage the finish.

6. Troubleshooting

IssueSolution
Loose fit of the new frameCheck bracket alignment. If needed, add foam tape to the edges of the frame for a snugger fit.
Gaps around the edges of the installed frameVerify that the original OEM bezel was fully removed before installing the new frame. Ensure the new frame is correctly seated.
Stereo doesn't power on after installationRecheck all wiring connections between the stereo and the vehicle. Ensure the battery terminal is securely reconnected.

7. Warranty and Support

The product comes with a 1-year limited warranty against manufacturing defects. For any missing parts or further assistance, please contact the seller directly.

For complex wiring or if you are unsure about any installation steps, professional help from a qualified car audio technician is highly recommended.

A PDF version of this user manual is available for download. Please refer to the product page for the link to the User Manual (PDF).

8. User Tips

  • Vehicle-Specific Adapters: For the best and easiest installation, consider purchasing vehicle-specific wiring harness adapters. These can significantly simplify the electrical connections between your new head unit and your car's existing wiring.
  • Test Before Final Assembly: Before fully snapping the new frame into place and reassembling your dashboard, perform a quick test of your stereo's functions (power, audio, steering wheel controls) to ensure everything is working correctly. This can save time and effort if adjustments are needed.
  • Gentle Handling: When prying off the original radio bezel or installing the new fascia, use plastic trim tools to avoid scratching or damaging your car's interior.
  • Double-Check Compatibility: While this fascia is designed for specific models, always double-check the inner dimensions against your chosen 2 DIN head unit to ensure a perfect fit.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.