Introduction
Thank you for choosing the ZOHAN 037 Bluetooth Electronic Earmuffs. This device is designed to provide effective hearing protection while allowing you to enjoy wireless audio and hands-free communication. Please read this manual thoroughly before using your earmuffs to ensure proper operation, maintenance, and safety.
Key Features:
- Bluetooth 5.4 Technology for stable wireless connection and hands-free calling.
- Effective Noise Reduction Rating (NRR) of 25dB and Single Number Rating (SNR) of 30dB.
- Built-in 1500mAh rechargeable battery providing over 40 hours of playtime in Bluetooth mode.
- 3.5mm audio input for infinite playtime with wired devices.
- Deep bass and true stereo sound for an immersive audio experience.
- Comfortable design with premium padded headband and breathable ear cushions.
- Designed for compatibility with hard hats, including Pyramex Safety HP50011/HP500 and Dewalt DPG11-W.

Package Contents
Please check the box for the following items:
- ZOHAN 037 Electronic Earmuffs
- USB Charging Cable
- 3.5mm Audio Cable
- User Manual (PDF available for download)
Setup
1. Charging the Headset
Your earmuffs come with a built-in 1500mAh rechargeable battery. Before first use, it is recommended to fully charge the device.
- Connect the provided USB charging cable to the charging port on the earmuffs.
- Plug the other end of the USB cable into a USB charger (e.g., car charger, power bank, computer USB port, or wall adapter).
- The LED indicator will glow red while charging.
- Once fully charged, the LED indicator will turn solid blue.
- A full charge typically takes approximately 4 hours.
Low Battery Warning: When the battery level drops below 20%, the earmuffs will provide "Low Battery" voice prompts for 20 minutes, repeating every minute. Please charge the headset promptly to avoid automatic power-off.

2. Fitting the Headset
Proper fit is crucial for effective hearing protection and comfort.
- Fully extend the headband to its maximum length.
- Place the ear cups over your ears, ensuring they completely cover your ears.
- Adjust the headband by sliding it up or down until the ear cups fit snugly and comfortably around your ears.
- Ensure the ear cushions form a firm seal against your head.
Important: Avoid any hair obstructing the ear cushions' seal. Do not wear the ear cups crooked or askew.

3. Hard Hat Mounting
The ZOHAN 037 earmuffs are designed to be compatible with various hard hats, including Pyramex Safety HP50011/HP500 and Dewalt DPG11-W.
- Step 1: Easy Installation - Align the earmuff's ARC rail mount with the slot on your hard hat and slide it in until it clicks securely.
- Step 2: Adjustable - Once mounted, the earmuffs can be adjusted up and down along the rail to find the optimal position over your ears.
- Step 3: Usage - Pull the earmuffs down over your ears for use, ensuring a snug fit.
- Step 4: Un-usage - When not in use, pivot the earmuffs upwards and back, away from your ears, to rest on the hard hat.

Operating Instructions
1. Button Overview
Familiarize yourself with the control buttons located on the left ear cup:
- Power Button ( ): On/Off, Bluetooth pairing.
- Multifunction Button (M): Play/Pause, Answer/End Call, Mute, Track control.
- Volume Up Button (>): Increase volume, Next track.
- Volume Down Button (<): Decrease volume, Previous track.
- LED Indicator: Shows power status, charging status, and Bluetooth connection.
- Charging Port: USB port for charging.
- Audio Jack: 3.5mm port for wired audio connection.
For a detailed visual guide on button functions, please refer to the user manual PDF or the diagram below.

2. Power On/Off
- To Power On: Press and hold the Power Button ( ) for 2 seconds. The earmuffs will enter Bluetooth pairing mode, and a voice assist will announce it.
- To Power Off: Press and hold the Power Button ( ) for 3 seconds.
3. Bluetooth Pairing
The earmuffs use Bluetooth 5.4 for a fast and stable connection.
- Ensure the earmuffs are powered on and in pairing mode (LED blinking blue).
- Enable Bluetooth on your device (smartphone, tablet, etc.).
- Search for available devices and select "EM037" from the list.
- Once connected successfully, you will hear "Bluetooth Connected".
- The earmuffs will automatically reconnect to the last paired device when powered on, if the device's Bluetooth is active.
- To re-pair with a new device: Long press the Multifunction Button (M) for 10 seconds until the LED blinks blue, then repeat steps 2-4.

4. Music Playback
- Play/Pause: Single press the Multifunction Button (M).
- Next Track: Double press the Multifunction Button (M).
- Previous Track: Triple press the Multifunction Button (M).
5. Call Management
When an incoming call is received in Bluetooth mode, music playback will pause, and a ringtone will sound in the headset.
- Answer Call: Single press the Multifunction Button (M).
- End Call: Long press the Multifunction Button (M) for 2 seconds.
- Reject Call: Long press the Multifunction Button (M) for 2 seconds.
- Mute/Unmute Microphone: Single press the Multifunction Button (M) during a call.
- Switch Between Calls (if a new call comes in): Double press the Multifunction Button (M) to switch between the first and second call. Long press M for 2 seconds to end the second call and switch back to the first.
6. Volume Control
- Increase Volume: Single press the Volume Up Button (>).
- Decrease Volume: Single press the Volume Down Button (<).
7. Audio Input Mode (Wired Connection)
For infinite playtime or to connect to non-Bluetooth devices, use the 3.5mm audio input.
- Connect one end of the provided 3.5mm stereo audio cable to the Audio Jack on the earmuffs.
- Connect the other end to the audio output of your device.
- In wired mode, adjust the volume and control playback directly from your connected device.
8. Product Demonstration Video
Maintenance
1. Cleaning
- Clean the earmuffs, ear cups, and cushions with a soft cloth lightly dampened with a neutral soap solution.
- Do not immerse the earmuffs in water or any liquid.
- Avoid using harsh detergents or chemical substances, as these can damage the product.
- Regularly remove the acoustic foam inside the ear cups to allow them to dry and prevent moisture damage to electronic components. Ensure the foam completely covers the electronics when reinstalled.
2. Storage
- Store the earmuffs in a clean, dry place at normal room temperature.
- Avoid stretching the headband or compressing the cushions during storage. Ensure cushions lie flat against each other without creases.
- Keep away from dust and direct sunlight.
- For prolonged storage, remove the batteries to prevent damage.
3. Battery Replacement (Internal)
The ZOHAN 037 earmuffs use an internal 1500mA lithium battery. If battery replacement is needed, it is recommended to contact customer support or a qualified technician. Do not attempt to replace the internal battery yourself unless you are experienced with electronics repair.
4. Hygiene Kit / Ear Pad Replacement
The ear cushions and inserts are replaceable. Always replace worn or damaged parts to maintain comfort and noise reduction effectiveness. Use only genuine hygiene kits from ZH.
- Remove the old ear cushion by pulling it straight out from the ear cup.
- Align the new ear cushion with the ear cup's groove.
- Press firmly around the edges until the new ear cushion snaps securely into place.
Refer to the user manual PDF for detailed diagrams on ear pad replacement.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Battery is depleted. | Charge the earmuffs fully. |
| Cannot pair via Bluetooth | Earmuffs not in pairing mode; Bluetooth on device is off; device too far. | Ensure earmuffs are on and LED is blinking blue. Turn on device Bluetooth. Keep devices within 1 meter during pairing. Try re-pairing (long press M for 10s). |
| No sound or low volume | Volume too low on earmuffs or connected device; earmuffs not connected. | Increase volume on both earmuffs and connected device. Ensure Bluetooth is connected or 3.5mm cable is fully inserted. |
| Poor sound quality | Interference; device too far; low battery. | Move closer to the connected device. Charge the earmuffs. Avoid strong radio wave sources. |
| Microphone not working | Microphone muted; connection issue. | Unmute microphone (single press M). Reconnect Bluetooth. |
Specifications
| Feature | Detail |
|---|---|
| Model | 037 (EM037) |
| Bluetooth Version | 5.4 |
| Bluetooth Range | Up to 80 feet (24 meters) |
| Battery Type | Built-in 1500mAh Lithium Rechargeable Battery |
| Charging Time | Approx. 4 hours |
| Playtime (Bluetooth) | ≥40 hours |
| Playtime (Audio Input) | Infinite |
| Noise Reduction Rating (NRR) | 25dB |
| Single Number Rating (SNR) | 30dB |
| High Frequency Attenuation (H) | 35dB |
| Medium Frequency Attenuation (M) | 27dB |
| Low Frequency Attenuation (L) | 21dB |
| Operating Temperature | -20°C to +50°C |
| Materials | Cup: ABS, Cover: ABS, Headband: Acetal, Foam: Polyurethane, Cushions: Polyurethane/PVC, Button: TPE |
| Certifications | CE 2834, EN352-1:2020, EN352-6:2020, EN352-8:2020, FCC Part 15 |

User Tips
- For optimal sound insulation and call clarity, ensure the earmuffs fit snugly around your ears, creating a good seal.
- If the hard hat clip doesn't fit perfectly, some users have found success by gently adjusting the clip or spring holders to achieve a better fit.
- While the earmuffs offer good sound quality, for critical audio listening, consider using them in wired mode.
Frequently Asked Questions (FAQ)
- Q: Does the ZOHAN 037 have a microphone?
- A: Yes, the earmuffs include a built-in microphone for hands-free calling.
- Q: Are these earmuffs waterproof?
- A: The earmuffs are not waterproof. Avoid exposing them to immersion or prolonged heavy rain. Do not allow any liquid to enter the headset, as this can damage the electronic components.
Safety Warnings and Important Notes
- This product is not a toy; keep it out of reach of children.
- Avoid dropping the headset, as it contains sensitive electronic components.
- Keep the headset away from strong radio waves to prevent degradation of sound quality and normal operation.
- Do not expose the headset to direct sunlight or high temperatures.
- Do not insert any foreign objects into the headset.
- Do not allow any liquid to enter the headset.
- Always wear the headset in noisy environments to ensure proper hearing protection.
- Inspect the headset regularly for damage. Do not use if damaged; have it checked and repaired by a professional.
- Do not disassemble the earmuffs. Any unauthorized repair or modification will void the warranty.
- The audibility of warning signals in a workplace may be impaired while using the entertainment facility. Be attentive to your surroundings.
- Dispose of the product and batteries according to national and local regulations.
Warranty and Support
Limited Warranty
PROHEAR (or ZOHAN, as per product branding) warrants this product to the original purchaser to be free from defects in material and workmanship, under normal use and conditions, for a period of three (3) years from the date of purchase.
Under this warranty, the unit will be replaced at our option. A copy of the original receipt or gift receipt is required for any warranty service.
Customer Support
If you have any questions, concerns, or require warranty service, please contact our customer support team:
- Email: support@proheartac.com
- Manufacturer: Hangzhou ZH Tech Co., Ltd.
- EU Declaration of Conformity: www.zhsafetech.com
For the full user manual, please refer to the official PDF document: ZOHAN 037 User Manual (PDF)