1. Introduction
The HS-SW2028 is a dedicated portable projection dock designed for Nintendo Switch 2 consoles. It offers high-definition screen projection, efficient port expansion, and convenient charging capabilities to enhance the gaming experience. This manual provides instructions for proper setup, operation, and maintenance of the device.
Note: The Nintendo Switch 2 console is not included with this product.
2. Safety Information
- Keep the device away from water, moisture, and extreme temperatures.
- Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
- Use only compatible power adapters (preferably the official Nintendo Switch 2 power supply) to prevent damage.
- Avoid dropping or subjecting the device to strong impacts.
- Ensure proper ventilation during use to prevent overheating.
3. Package Contents
Please check the box for the following items:
- 1x HS-SW2028 Portable Projection Dock
- 1x User Manual

4. Product Features
- Precise Compatibility & Plug-and-Play: Features a TYPE-C male connector for direct connection to the Switch 2 console, supporting PD protocol and stable 5V power supply for simultaneous gameplay and charging.
- 4K HD Projection: HDMI output supports a maximum resolution of 3840x2160 at 60Hz for clear and smooth visuals on a TV.
- Abundant Interfaces: Equipped with three USB 3.0 ports for connecting external devices like game controllers and portable hard drives.
- Fast Charging: TYPE-C power input supports up to 60W fast charging, allowing continuous play while charging.
- Compact Size: Approximately half the volume of the official dock, making it highly portable for travel.
- Thoughtful Design: Includes dual-side ventilation for heat dissipation, positioning points for secure console placement, non-slip silicone pads on the bottom, and optimized rounded corners for safety and aesthetics.
- One-key Mode Switching: Supports quick switching between TV and console modes without disconnecting the console.
5. Product Overview
Familiarize yourself with the ports and buttons on your docking station:

- TV Switch Button: Press to switch between TV and console display modes.
- Indicator Light: Shows the power and connection status.
- Power Type-C Port: For connecting the power adapter (input).
- HDMI Port: For connecting to a TV or monitor.
- USB 3.0 Ports (x3): For connecting external USB devices.
- TYPE-C Male Connector: For docking the Nintendo Switch 2 console.
6. Setup Instructions
Follow these steps to set up your docking station:
- Connect a compatible power adapter (e.g., official Switch 2 power supply) to the Power Type-C Port on the docking station.
- Connect one end of an HDMI cable to the HDMI Port on the docking station and the other end to an HDMI input on your TV or monitor.
- Carefully align and place your Nintendo Switch 2 console onto the TYPE-C Male Connector on the docking station. Ensure it is securely seated.
- Your TV should now display the Switch 2 screen. If not, ensure your TV input is set to the correct HDMI channel.
7. Operating Instructions
7.1. Charging the Console
When the Switch 2 console is docked and the power adapter is connected to the docking station, the console will charge. You can continue playing games while the console charges.

7.2. Connecting USB Devices
You can connect external USB devices, such as wired game controllers or portable hard drives, to the three USB 3.0 Ports on the docking station.

7.3. Switching Display Modes (TV/Console)
To switch the video output between your TV and the Switch 2 console screen, short press the TV Switch Button on the docking station.


8. Specifications
| Parameter | Value |
|---|---|
| Model | HS-SW2028 |
| Material | ABS |
| Input DC Voltage | 5V - 20V |
| Output Voltage | 5V - 20V |
| Operating Current | Approximately 3A |
| HDMI Output Resolution | Up to 3840x2160 @ 60Hz |
| USB Ports | 3x USB 3.0 |
| Product Dimensions (L x W x H) | 15.6 cm x 4.75 cm x 7.4 cm (6.14 in x 1.87 in x 2.91 in) |
| Package Size (L x W x H) | 16.3 cm x 5.7 cm x 8.3 cm |
| Package Weight | 139.5 g |

9. User Tips
- Always connect the power cable to the docking station for external video output to function.
- If your Nintendo Switch 2 has a protective case, you may need to remove it for the console to fit properly into the dock's Type-C connector.
- For optimal heat management during extended gaming sessions, utilize the dock's dual-side ventilation ports. Consider additional external cooling if needed.
10. Troubleshooting
- No picture on TV:
- Ensure the power adapter is connected to the dock and the dock is receiving power.
- Verify the HDMI cable is securely connected to both the dock and the TV.
- Check that your TV is set to the correct HDMI input source.
- Try gently pressing the power button on the Switch 2 console while it's docked, or re-docking the console.
- USB devices not working after switching video output:
- If using a wired Switch controller or other USB device, re-plug the USB device into the dock after each video mode switch.
- Console does not fit or connect properly:
- If your Switch 2 console has a protective case, it might need to be removed for proper docking.
- Overheating during use:
- Ensure the dock's ventilation ports are not obstructed.
- Consider placing the dock in a well-ventilated area.
- For prolonged gaming, external cooling solutions (e.g., a USB-powered fan connected to one of the dock's USB ports) can be used.
11. Frequently Asked Questions
- Q: Does this dock work with the Nintendo Switch OLED?
A: This product is specifically designed for the Nintendo Switch 2. While it might physically fit, full compatibility and functionality with the Nintendo Switch OLED are not guaranteed and not officially supported. - Q: Does the dock support 120Hz refresh rate?
A: The HS-SW2028 docking station supports a maximum resolution of 3840x2160 at 60Hz. It does not support 120Hz refresh rates. - Q: How do I update the dock's firmware? Will it work with Switch 2 firmware 21.0.0 or later?
A: The docking station itself does not have user-updatable firmware. It is designed to be compatible with the Nintendo Switch 2. User reports indicate it functions correctly with Switch 2 firmware versions up to 22.5.0.
12. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the docking station. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, store the docking station in a cool, dry place, away from direct sunlight and extreme temperatures.
- Handling: Avoid pulling on cables or forcing connectors. Handle the device with care to prevent damage to ports or the console connector.

13. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please refer to the manufacturer's official website or contact their customer service department. Keep your purchase receipt as proof of purchase.