TOMZN TOB1S-63 4P Smart Circuit Breaker User Manual

1. Product Overview

The TOMZN TOB1S-63 4P is a Wi-Fi smart circuit breaker designed for comprehensive electrical safety and smart energy management. It integrates over/under-voltage, over-current, overload, short-circuit, and over-temperature protection. This device provides real-time monitoring of voltage, current, power, and energy consumption, offering features like prepaid billing and a manual lock for enhanced safety. It can be remotely controlled and monitored via Wi-Fi, making it an efficient solution for smart home and industrial applications.

Key Features:

• Comprehensive Protection: Includes over-voltage, under-voltage, over-current, overload, short-circuit, and high-temperature protection.
• Energy Monitoring: Real-time measurement of Voltage (V), Amperage (A), Active Power (kW), Active Energy (kWh), and Temperature (°C).
• Smart Control: Wi-Fi remote control via the SmartLife app, timer functions, and prepaid billing capability.
• RS485 Communication: Allows for remote control (ON/OFF) and data export via RS485.
• Simultaneous Disconnection: Cuts off both the neutral (N) and live (L) lines simultaneously to eliminate standby power risks.
• Mechanical Lock: Ensures safety during maintenance by preventing accidental closure.

Figure 1: TOMZN TOB1S-63 4P Smart Circuit Breaker highlighting key features like WiFi+RS485, Timer, Prepaid function, and various protections.

2. Safety Information

General Warnings:

• Suffocation Hazard: Keep packaging bags away from babies and children. Do not use in cribs, beds, carriages, or playpens. This bag is not a toy.
• Professional Installation: After receiving the product, ensure an electrical professional performs the installation and initial operation.

Precautions:

• Do not place the device near flammable materials.
• Ensure adequate ventilation during operation to prevent overheating.
• Disconnect the device from power and store it properly when not in use for extended periods.
• Always engage the mechanical lock during maintenance to prevent accidental power restoration.

3. Specifications

Dimensions:

• Width: 89mm (front), 77mm (side max)
• Height: 100mm (total), 110mm (with antenna)
• Depth: 63mm (front to back), 35mm (antenna height)

Figure 2: Dimensional drawing of the TOB1S-63 4P Smart Circuit Breaker.

Applicable Regulations and Harmonized Standards:

• Low Voltage Directive 2014/35/EU
• Electromagnetic Compatibility Directive 2014/30/EU
• Restriction of the Use of Certain Hazardous Substances (RoHS) Directive 2011/65/EU

4. Setup and Installation

4.1. Wiring Instructions:

1. Ensure power is OFF before starting any wiring.
2. Connect the equipment in accordance with the provided wiring diagram specifications.
3. For DIY wiring, input the Live (L) and Neutral (N) lines, then screw down to penetrate the insulating layer of the power lines.
4. After wiring, adjust the equipment parameters as needed.

Figure 3: Wiring diagram showing L1, L2, L3, N inputs and outputs, and RS485 A/B connections.

4.2. SmartLife Software Instruction (App Setup):

1. Before starting the connection, ensure your phone's Wi-Fi and Bluetooth are turned ON.
2. Connect your phone to a 2.4GHz Wi-Fi network (5GHz networks are not supported).
3. On the circuit breaker, press and hold the network button until the Wi-Fi indicator light flashes rapidly, indicating the device is in network matching (pairing) mode.
4. Open the SmartLife app on your smartphone.
5. Tap the "+" icon (usually in the top right corner) to add a device.
6. The app should automatically discover the