ANYFAR RM-VLV2540F

Contents

ANYFAR Wireless CarPlay & Android Auto Module

Model: RM-VLV2540F

Introduction

Thank you for choosing the ANYFAR Intelligent Car Information System. This module seamlessly integrates Apple CarPlay and Android Auto into your Volvo vehicle, utilizing your car's original screen. It provides access to navigation, music, calls, and messages, enhancing your driving experience without altering your vehicle's factory setup. This upgrade transforms your existing infotainment system into a smart, intuitive hub.

ANYFAR Wireless Carplay & Android Auto Module

Figure 1: ANYFAR Wireless CarPlay & Android Auto Module Overview

Safety Precautions

  • Installation should only be performed by qualified professionals to prevent damage to vehicle electrical systems.
  • Always disconnect the car battery before installation to avoid short circuits.
  • Ensure all connections are secure and properly insulated to prevent fire hazards.
  • Do not obstruct airbags, driver visibility, or essential vehicle controls during installation.
  • Avoid modifying critical vehicle safety systems or wiring.
  • Operate connected devices only when the vehicle is parked to avoid driver distraction.
  • Regularly inspect for loose connections or signs of overheating during use.
  • Discontinue use immediately if unusual smells, sounds, or malfunctions occur.
  • Ensure product usage complies with all local traffic laws and regulations.
  • Keep the product away from water, extreme temperatures, and direct sunlight when not in use.

Product Functions

  • Apple CarPlay: Connects iPhone users to car systems, mirroring key apps for navigation, music, calls, and messages via the car's screen or voice commands. Supports hands-free operation and seamless syncing.
  • Android Auto: Connects Android phones to car displays, providing safe access to essential apps for navigation, music, calls, and messages via voice or touch. Prioritizes driving-focused features for enhanced safety.
  • Front/Rear/360 Input: The module supports video decoding for front-view cameras, rear-view cameras (with intelligent dynamic trajectory display and radar support), and can integrate with a 360° panoramic view system.
Original Car Upgrade Smart Module Features

Figure 2: Key Features of the Smart Module

Applicable Volvo Models

This module is compatible with specific Volvo models and years, typically those equipped with a 7-inch screen. Please verify your car's model, year, and central console button configuration for compatibility.

For Volvo Models (Approx. 2015-2020)

Car ModelYearsScreen Size
V402015-20207"
V602015-2019
S60/S60L2015-2019
XC602015-2017
S80L2015-2017
Volvo Model Compatibility 2015-2018

Figure 3: Volvo Model Compatibility (2015-2018 range) and correct console button type.

For Volvo Models (Approx. 2010-2015)

Car ModelYearsScreen Size
V402010-20147"
S60/V60/XC602010-2015
V70/XC702010-2015
S802010-2014

Important Note for 2010-2015 Models: Your Volvo must NOT have the globe icon on the central console. There must be a "BLANK" or "CAM/TEL" button as pictured in the compatibility image.

Volvo Model Compatibility 2010-2015

Figure 4: Volvo Model Compatibility (2010-2015 range) and required console button type.

Setup and Installation

Installation involves connecting the module to your car's existing infotainment system. All relevant cabling is typically included.

Wiring Diagram Overview

The module connects between your car's head unit and its original wiring harnesses. Key connections include:

  • Factoty Power Harness: Connects to the car's power supply.
  • Factoty LVDS Harness: Connects to the car's video signal.
  • Original Car Fiber Optic Cable: Ensure this is correctly reconnected if disconnected.
  • Module Inputs/Outputs: CVBS-IN, LVDS-OUT, CAMERA/USB, POWER/CAN.

Refer to the detailed wiring diagram in the user manual PDF for precise connections.

Physical Installation Steps

  1. Carefully remove the car's central console trim and access the rear of the infotainment head unit.
  2. Disconnect the original wiring harnesses from the head unit.
  3. Connect the module's power and LVDS harnesses in-line with the car's original wiring and the head unit.
  4. Ensure all connections are secure and properly seated.
  5. Route the module and its wiring neatly, ensuring no wires are pinched or interfere with moving parts.
  6. Before reassembling the console, perform initial testing.
Installation Step: Connecting Main Harness

Figure 5: Connecting the main wiring harness behind the car's head unit.

Installation Step: Connecting to Head Unit

Figure 6: Connecting the module's harness to the back of the car's head unit.

DIP Switch Settings

The DIP switches on the module must be set according to your specific car model and screen size. Incorrect settings can lead to improper functionality.

Car ModelYearScreen SizeDIP Setting
V402015-20207"245 67 ON
V602015-20197"2 5 ON
S60/S60L2015-20197"2 5 ON
XC602015-20177"2 5 ON
S80L2015-20177"2 5 67 ON

Note: "ON" indicates the dial is in the down position. After changing DIP settings, restart the decoder for changes to take effect.

Operating Instructions

Retaining Original Car Functions

The module is designed to work seamlessly with your car's existing controls.

Keep Original Car Functions

Figure 7: Original car functions (steering wheel, central panel, touch screen) are retained.

Button Control (Steering Wheel)

Button IconOperationFunction
Previous/Next TrackLong pressSwitch between OEM screen and module interface.
Previous/Next TrackShort pressPrevious/Next song.
Volume UpShort pressIncrease volume.
Volume DownShort pressDecrease volume.

Button Control (Central Control Panel)

Button IconOperationFunction
Control KnobSwipe/ClickControl function within the module interface.
Hazard Lights ButtonDouble Click / Short pressSwitch between OEM screen and module interface.

Wireless CarPlay Connection

The module supports wireless CarPlay. Ensure your vehicle's audio system is set to Bluetooth music mode for optimal performance.

  1. On your iPhone, turn on Bluetooth and Wi-Fi.
  2. Go to the Bluetooth settings of the Smart Box (module).
  3. On your iPhone, search for Bluetooth devices and select "CAR Audio_XXXX" (where XXXX is a unique identifier).
  4. Confirm the pairing request on both devices.
  5. When prompted, select "Use CarPlay".
Wireless CarPlay Demonstration

Figure 8: Wireless CarPlay in operation.

Wireless Android Auto Connection

The module supports wireless Android Auto. Ensure your vehicle's audio system is set to Bluetooth music mode for optimal performance.

  1. On your Android phone, turn on Bluetooth and Wi-Fi.
  2. Go to the Bluetooth settings of the Smart Box (module).
  3. On your Android phone, search for Bluetooth devices and select "CAR Audio_XXXX".
  4. Confirm the pairing request on both devices.
  5. Follow any on-screen prompts on your phone and car display to complete the Android Auto connection.
Wireless Android Auto Demonstration

Figure 9: Wireless Android Auto in operation.

Audio Source

After connecting, ensure the sound source on your iPhone/Android is set to the original car radio (e.g., "Volvo" or your car's Bluetooth name) for audio output.

External Settings (Rear View Camera Input)

The CarPlay interface supports input from aftermarket rear-view cameras. Connect the camera according to the provided wiring diagram in the full PDF manual. The module has dedicated inputs for camera video (CAM F_Video, CAM BVideo).

External Settings (Radar and Trajectory)

If your aftermarket camera supports reversing trajectory lines, access the module's system settings:

  1. Go to "Factory mode - Advanced mode".
  2. Enter password "888888".
  3. In "MCU Setup", uncheck the "A1" box to display the reversing trajectory line.
  4. Uncheck the "A2" box for aftermarket radar options.
  5. If connecting a front camera, select the "A3" option.
  6. Return to the previous level and click "Restart system" for changes to take effect.

Maintenance

The ANYFAR module is designed for minimal maintenance. To ensure longevity and optimal performance:

  • Keep the module and surrounding area clean and free from dust and debris.
  • Avoid exposing the module to extreme temperatures or direct moisture.
  • Periodically check visible connections for any signs of loosening or damage.
  • If the module is removed for any reason, ensure all connections are re-secured properly upon reinstallation.

Troubleshooting

Common Issues and Solutions

  • Why does the module's Bluetooth disconnect?
    This is normal. Wireless CarPlay/Android Auto primarily uses Wi-Fi for data transmission after an initial Bluetooth handshake. Bluetooth may disconnect to avoid interference once the Wi-Fi connection is established.
  • Cannot connect CarPlay/Android Auto, but Bluetooth is paired.
    Forget the device's Bluetooth connection on your phone and reset your phone's Wi-Fi settings (iPhone: Settings > General > Transfer or Reset [Device] > Reset > Reset Network Settings). Then try connecting again.
  • Wireless CarPlay/Android Auto is not stable.
    1. Ensure the module's mounting position is not blocked by metal components, which can impair Wi-Fi signal transmission.
    2. Switch the Wi-Fi channel within the module's settings: Factory Mode > Connectivity Settings > Hotspot Band > Select 1, 6, or 11, depending on your region and local interference.
  • No sound or lost sound.
    Verify that your phone's audio output is correctly set to your car's Bluetooth system (e.g., "Volvo"). Check all audio connections during installation.
  • Module doesn't work at all after installation.
    Double-check all wiring connections against the diagram. Ensure the DIP switch settings are correct for your specific car model and year. Confirm the car battery was disconnected and reconnected properly.
  • OEM camera not supported or not working.
    While the module supports camera input, compatibility with specific OEM cameras can vary. Ensure the camera is correctly wired to the module's dedicated camera inputs.
  • Steering wheel/central console buttons do not work as described.
    Verify DIP switch settings. Some button functions might require specific software versions or car configurations.
  • Voice commands (e.g., "Hey Google") result in silence.
    Ensure your phone's microphone permissions are granted for CarPlay/Android Auto and that the audio output is correctly routed to the car's speakers.

Specifications

ParameterValue
Operating Voltage9-16V, 14.4V (rated)
Storage Temperature-30 ~ +85°C
Operating Temperature-30 ~ +75°C
Ambient Humidity<98% (at 45°C), 65 ± 5% (rated)
Power Consumption Current1A (rated), 3A (Max)
Shutdown Current300mA (Clock is on)
Quiescent CurrentLess than 3mA
Charging Current≤2A (If USB charging current >1A, host activates circuit protection to control current within 15A to prevent burning)

User Tips

  • Verify Compatibility: Before purchasing and installing, double-check your Volvo's exact model year and central console button configuration against the provided compatibility tables and images. Pay close attention to the "globe icon" warning for older models.
  • Professional Installation: Due to the complexity of vehicle electrical systems, professional installation is highly recommended to avoid damage and ensure correct functionality.
  • Check DIP Settings: Always confirm that the DIP switches on the module are set correctly for your specific vehicle model and screen size. Incorrect settings are a common cause of issues.
  • Wi-Fi Channel Optimization: If you experience unstable wireless connections, try changing the Wi-Fi channel in the module's settings (1, 6, or 11) to find the clearest signal in your environment.
  • Test Before Reassembly: After making all connections but before fully reassembling your car's dashboard, perform a thorough test of all functions (CarPlay, Android Auto, sound, camera, button controls) to ensure everything works as expected.

Warranty and Support

For any technical issues or support inquiries, please contact:

Email: techsupport@anyfar.com

Further information and resources may be available on the official website:

Website: www.anyfar.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.