1. Introduction
This manual provides important information for the safe and proper use, assembly, and maintenance of your new Engineering Excavator Model. Please read this manual thoroughly before use and retain it for future reference.
This toy is designed to provide an engaging and educational play experience, simulating real-world engineering vehicle operations with its detailed features and interactive functions.
Intended Age: This product is suitable for children aged 3 years and above. It is not suitable for children under 3 years old due to small parts.
Manufacturer: Shenzhen Jiemu E-commerce Co., Ltd.
2. Safety Information and Warnings
⚠ IMPORTANT SAFETY INFORMATION
- Choking Hazard - Small Parts: This product contains small parts. Not suitable for children under 3 years. Keep the toy and all packaging materials away from infants and young children to prevent accidental swallowing or choking.
- Strangulation Hazard: This toy may contain strings, cords, or straps which could pose a risk of entanglement. Do not allow children to wrap them around their necks or other body parts. Adults should regularly check the integrity of any strings, cords, or straps.
- Packaging Bag Hazard: Plastic packaging bags can cause suffocation. Destroy them immediately or keep them out of reach of children.
- General Warning: Regularly inspect the toy for any damage (e.g., cracks, exposed sharp points, exposed wires). Discontinue use immediately and discard the toy if damage is found.
- Usage Environment: Use under adult supervision. Avoid playing near stairs, roads, fire sources, pools, or other hazardous areas.
- California Proposition 65 Warning: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
3. Setup and Assembly
3.1 Unpacking and Inspection
- After opening the packaging, carefully remove all components.
- Before handing the toy to a child, an adult must inspect all parts and discard all packaging materials (e.g., plastic wrap, foam, cords, staples) to prevent choking or injury risks.
3.2 Assembly (If Applicable)
If your model requires assembly, please follow the included diagrams and instructions. Assembly must be performed by an adult.
- Ensure all screws and components are securely tightened.
- Verify that all connections are firm and stable.
3.3 Battery Installation (If Applicable)
This toy uses AA/LR6 type batteries. Battery installation must be performed by an adult.
- Locate the battery compartment.
- Install batteries correctly according to the positive (+) and negative (-) polarity markings inside the compartment.
- Do not mix old and new batteries, or batteries of different types (e.g., carbon-zinc, alkaline, rechargeable).
- Do not attempt to recharge non-rechargeable batteries.
- Do not expose batteries to fire or short-circuit them.
- If battery leakage occurs, handle with gloves. If chemicals come into contact with skin or eyes, rinse immediately with plenty of water and seek medical attention.
- Remove the batteries if the toy will not be used for an extended period.
4. Operating Instructions
Your Engineering Excavator Model features realistic functions for an immersive play experience.
4.1 Friction Power Operation
This model is equipped with a friction power mechanism. To operate:
- Place the excavator on a flat, smooth surface.
- Push the excavator forward firmly and then release it. The friction motor will propel the toy forward.
4.2 Articulated Arm and Attachments
The excavator features a highly articulated arm and interchangeable attachments for various tasks.
- Arm Movement: Manually adjust the excavator arm to lift, lower, and extend.
- 360-Degree Rotation: The upper cabin and arm assembly can rotate 360 degrees on its base, allowing for versatile positioning.
- Interchangeable Heads: Your model may come with different heads such as a bucket, grab, or hammer. These can be swapped to perform different simulated tasks.
4.3 Transformable Chassis and Stabilizers
Some models feature a transformable chassis with deployable stabilizers for enhanced stability during simulated heavy lifting or digging operations.
- Manually extend the four legs/stabilizers from the chassis to transform the vehicle into a stable, stationary position.
- Retract the stabilizers to return to wheeled mode for movement.
4.4 Product Demonstration Video
Watch this video for a visual guide on the product's features and operation:
5. Maintenance
5.1 Cleaning
- Before cleaning, remove any batteries (if applicable) or disconnect from power.
- Use a clean, slightly damp, soft cloth to wipe the surface of the toy.
- Do not immerse the toy in water.
- Avoid using alcohol, solvents, or other chemical cleaners, as these may damage the toy's finish or materials.
5.2 Storage
- Store the toy in a cool, dry place away from direct sunlight and extreme temperatures.
- If the toy will not be used for an extended period, remove any batteries to prevent leakage.
6. Troubleshooting
This section addresses common issues you might encounter with your toy.
- Toy not moving with friction power: Ensure the toy is on a smooth, flat surface. Push it forward with sufficient force before releasing. If it still doesn't move, check for any obstructions in the wheels or gears.
- Attachments not moving smoothly: Check for any debris or foreign objects obstructing the joints. Ensure the joints are not overly tightened or loose.
7. Specifications
| Attribute | Detail |
|---|---|
| Model Number | 706-090 |
| Scale | 1:40 |
| Material | ABS Plastic |
| Type | Car (Engineering Vehicle Toy) |
| Features | Diecast, Friction Power, Articulated Arm, 360-degree Rotation, Transformable Chassis, Interchangeable Attachments |
| Recommended Age | 3 years and above |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 18 cm x 17 cm x 9 cm |
| Package Weight | 0.33 kg |
| Certifications | CE, UKCA (where applicable) |
| Applicable Regulations | EU Directive 2009/48/EC, EN 71-1, EN 71-2, EN 71-3, EN 62115, ASTM F963-17, ISO 8124-1 |
8. User Tips
- Attachment Grip: Some users have noted that the grab attachments might have limited gripping strength. Manage expectations regarding the ability to firmly grasp and lift heavier objects.
- Smooth Surfaces: For optimal friction power performance, ensure the toy is used on smooth, hard surfaces.
9. Disposal
Dispose of this product and its batteries (if applicable) according to local regulations. Do not dispose of electric toys as general household waste. Please recycle components where facilities exist.
10. Support
For any assistance or inquiries, please contact customer support:
Email: 3109348198@qq.com
The content of this manual is subject to change without prior notice.