1. Introduction
Thank you for purchasing the NieNie DS-6680 Digital Alarm Clock. This clock features a clear LED display, 8-color mood lighting, automatic dimming, dual alarms, and displays time, date, and day of the week. This manual will guide you through the setup, operation, and maintenance of your new alarm clock.

Image: NieNie DS-6680 Digital Alarm Clock on a kitchen counter, displaying time and date.
2. Package Contents
Please check the package for the following items:
- 1 x NieNie DS-6680 Digital Alarm Clock
- 1 x USB Charging Cable
- 1 x User Manual

Image: The box contents include the digital alarm clock, a USB charging cable, and the instruction manual.
3. Product Overview
3.1. Display Features

Image: Close-up front view of the digital alarm clock display showing time, date, day of the week, and colorful minute markers.
- Time Display: Large digital numbers for hours and minutes.
- Date Display: Month and day.
- Day of the Week: Highlighted current day (MON, TUE, WED, THU, FRI, SAT, SUN).
- Minute Markers: Colorful dots around the edge indicating minutes.
- Alarm Indicators: Two alarm icons at the bottom of the display.
3.2. Back Panel and Buttons

Image: Back view of the clock showing battery compartment, USB power port, and control buttons.
- Alarm Button (Bell Icon): Used to set and activate alarms.
- SET Button: Used to enter and confirm time and date settings.
- '+' Button: Used to increase values or cycle through options.
- '-' Button: Used to decrease values or cycle through options.
- Battery Compartment: For 3 x AAA batteries (not included).
- USB Power Port: For continuous power supply.
3.3. Dimensions

Image: Side view of the clock with dimensions.
- Height: 122mm (4.8 inches)
- Diameter: 110mm (4.33 inches)
- Width (Depth): 35mm (1.38 inches)
4. Setup
4.1. Powering the Clock
Your alarm clock can be powered in two ways:
- USB Power (Recommended for continuous display): Connect the provided USB cable to the USB power port on the back of the clock and plug the other end into a USB power adapter (not included) or a powered USB port. The display will remain continuously on.
- AAA Batteries (for portable use, display turns off): Open the battery compartment on the back and insert 3 x AAA batteries (not included), observing the correct polarity. When powered by batteries, the display will turn off after 5-10 seconds of inactivity to conserve power. Press any button to wake up the display for 5-10 seconds.
4.2. Initial Power-On
Once powered, the clock will display a default time. You will need to set the correct time and date.
Video: Product demonstration showing various features including power connection, time display, and mood light changes.
5. Operating Instructions
5.1. Setting Time, 12/24H Format, and DST
- In normal time display mode, press the SET button once. The hour digits will start flashing.
- Use the '+' or '-' buttons to adjust the hour.
- Press SET again. The minute digits will start flashing.
- Use the '+' or '-' buttons to adjust the minutes.
- Press SET again. The 12/24H format will flash.
- Use the '+' or '-' buttons to select either 12-hour or 24-hour format.
- Press SET again. The DST (Daylight Saving Time) indicator will flash.
- Use the '+' or '-' buttons to turn DST ON or OFF.
- Press SET again to exit time setting mode and save your changes.
5.2. Setting Date
- In normal time display mode, press the SET button briefly to display the current date.
- While the date is displayed, press and hold the SET button for 3 seconds. The year digits will start flashing.
- Use the '+' or '-' buttons to adjust the year.
- Press SET again. The month digits will start flashing.
- Use the '+' or '-' buttons to adjust the month.
- Press SET again. The day digits will start flashing.
- Use the '+' or '-' buttons to adjust the day.
- Press SET again to exit date setting mode and save your changes.
5.3. Setting Alarms (Alarm 1 and Alarm 2)
- Press the Alarm button (bell icon) briefly to display the set time for Alarm 1.
- Press and hold the Alarm button for 3 seconds to enter Alarm 1 setting mode. The hour digits will flash.
- Use the '+' or '-' buttons to adjust the alarm hour.
- Press the Alarm button again. The minute digits will flash.
- Use the '+' or '-' buttons to adjust the alarm minutes.
- Press the Alarm button again. The ON/OFF indicator for Alarm 1 will flash.
- Use the '+' or '-' buttons to select ON to activate the alarm or OFF to deactivate it.
- Press the Alarm button again to exit Alarm 1 setting mode.
- Repeat steps 1-8 for Alarm 2 by pressing the Alarm button twice to display Alarm 2 time, then press and hold to set.
5.4. Adjusting Mood Light Colors
The clock features 8 distinct mood light colors and a cycling mode.

Image: Grid showing 8 mood light colors (White, Red, Orange, Yellow, Green, Ice Blue, Dark Blue, Purple) and a 9th option for cycling through colors.
To change the mood light color or activate the cycling mode, gently tap the top surface of the clock. Each tap will cycle through the available colors (C1-C8) and then to the 8-color cycling mode (C9).
5.5. Adjusting Display Brightness
The clock offers automatic light sensitivity with different levels for normal and sleep modes.

Image: Two clocks demonstrating brightness modes: one showing 'LAU' (3 levels of automatic light sensitivity) and another showing 'LSL' (Sleep mode, 4 levels automatic light sensitivity).
To adjust the display brightness or switch between modes (LAU for normal auto-dimming, LSL for sleep mode auto-dimming), gently tap the top surface of the clock. Tapping will cycle through the brightness levels within the current mode and switch between LAU and LSL modes.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the clock's surface. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Battery Replacement: If using batteries, replace all three AAA batteries at the same time when the display becomes dim or unresponsive.
- Storage: If storing the clock for an extended period, remove the batteries to prevent leakage.
7. Troubleshooting
- Problem: Display turns off after a few seconds.
- Solution: This is normal behavior when the clock is powered by AAA batteries to conserve power. If you want the display to stay on continuously, please power the clock using the USB cable.
- Problem: Clock is not responding to button presses.
- Solution: Check if the clock is properly powered. If using batteries, replace them with fresh ones. If using USB, ensure the cable is securely connected and the power source is active.
- Problem: Alarm does not sound.
- Solution: Ensure the alarm is set to 'ON' in the alarm settings. Verify the alarm time is correctly set.
8. Specifications
| Brand | NieNie |
| Model Number | DS-6680 |
| Type | Alarm Clocks |
| Motivity Type | Digital |
| Screen Type | LED |
| Material | Plastic |
| Shape | Circular |
| Diameter | 110mm |
| Length | 110mm |
| Width (Depth) | 35mm |
| Weight | 190g |
| Function | Auto Dimmable, Calendars, LUMINOVA |
| Power Source | USB (always on display), 3 x AAA Batteries (display turns off after 5-10s inactivity) |
| Package Dimensions | 16cm (L) x 13cm (W) x 5cm (H) |
| Package Weight | 0.209 kg |
9. User Tips
- For a continuously illuminated display, always use the USB power connection. Battery power will cause the display to turn off after a short period of inactivity.
- The automatic brightness adjustment feature is highly appreciated for its comfort, especially at night.
- The large, clear LED display makes the time easy to read, even for users with vision difficulties.
- Utilize the dual alarm feature for different wake-up times or as a backup.
10. Warranty and Support
For any issues or questions regarding your NieNie DS-6680 Digital Alarm Clock, please refer to the seller's support channels or contact customer service. Keep your purchase receipt for warranty claims.