DJI Osmo Nano

Contents

DJI Osmo Nano Action Camera User Manual

Model: Osmo Nano

Introduction

This manual provides essential information for operating your DJI Osmo Nano action camera. Please read it thoroughly before first use to ensure safe and optimal performance.

Read Before Use

DJI™ provides tutorial videos and several documents to assist you:

  • Safety Guidelines
  • Quick Start Guide
  • User Manual (this document)

It is recommended to watch all tutorial videos and read the Safety Guidelines before using the product for the first time. Review the Quick Start Guide for initial setup and refer to this User Manual for detailed information.

Video Tutorials

For visual demonstrations on how to use the product safely, visit the official DJI website or scan the QR code below:

QR code for DJI Nano video tutorials
Scan this QR code or visit www.dji.com/nano/video

Product Profile

Overview

The DJI Osmo Nano consists of two main parts: the camera and the multifunctional vision dock. The camera is designed for shooting, while the vision dock provides a live view and allows for parameter adjustments.

DJI Osmo Nano camera with vision dock, front view

Front view of the DJI Osmo Nano camera and vision dock.

DJI Osmo Nano camera with vision dock, angled view

Angled view of the DJI Osmo Nano.

Components

  1. Camera Button
  2. Buzzer
  3. Microphone
  4. Lens
  5. Status LED
  6. Contacts
  7. Quick-release Locking Clips
  8. Quick-Release Button
  9. Touchscreen
  10. Vision Dock Button
  11. microSD Card Slot
  12. USB-C Port
  13. Speaker
  14. Air Pressure Balance Hole

Status LED Indicators

Blinking PatternDescription
Solid greenCamera powered on and ready for shooting. Briefly blinks yellow if battery is below 20%.
Temporarily off and stays greenTaking a photo
Blinks redRecording a video or taking a countdown photo
Blinks red three times rapidlyPowering off the camera
Blinks blue slowlyPreparing for auto recording
Blinks blue quicklyTrying to connect to DJI Mimo App (camera alone)
Solid yellowInternal storage is full
Blinks red and green alternatelyUpdating firmware
Solid redPre-charging (vision dock). Battery level displayed on screen afterward.

Standard Accessories

The DJI Osmo Nano Standard Combo includes:

  • Osmo Nano Camera × 1
  • Osmo Nano Multifunctional Vision Dock × 1
  • Osmo Nano Magnetic Hat Clip × 1
  • Osmo Nano Magnetic Lanyard × 1
  • Osmo Nano Protective Case × 1
  • USB-C to USB-C PD Cable (USB 3.1) × 1
  • Osmo Nano Dual-Direction Magnetic Ball-Joint Adapter Mount × 1
DJI Osmo Nano camera and accessories in box

Included accessories with the DJI Osmo Nano.

Setup

Assembly and Disassembly

The camera and vision dock can be used together or separately.

  • To assemble: Attach the camera to the vision dock with the lens facing forward or backward. Press the camera down until you hear a click, indicating a secure connection.
  • To disassemble: Press the quick-release buttons on both sides of the vision dock to unlock and remove the camera.
Diagram showing how to attach the camera to the vision dock

Illustration of attaching the camera to the vision dock.

Important Notes:

  • The vision dock charges the camera when installed. In high-power consumption scenarios, charging may pause, prioritizing the vision dock's battery.
  • When using the camera independently, the vision dock can provide a wireless live view. Be aware of the effective range of video transmission.

Accessory Usage

  • Magnetic Hat Clip & Lanyard: Ensure the camera is fully attached to the magnetic plate to prevent falling. Do not use the vision dock with the magnetic lanyard. Avoid using the magnetic lanyard on thick clothing or during intense movements, as this can weaken the connection.
  • Protective Case: Recommended for extended holding. The camera may fall out if subjected to impacts; avoid high-impact situations when using the case.
  • Dual-Direction Magnetic Ball-Joint Adapter Mount: Suitable for short-term, static fixed shooting. Not for high-impact situations. Attach the suction cup to smooth, clean, flat surfaces only. Avoid curved, rough, dusty, or dirty surfaces.
Woman wearing DJI Osmo Nano on a hat clip

Osmo Nano on a magnetic hat clip.

Man wearing DJI Osmo Nano on a headband

Osmo Nano on a headband mount.

DJI Osmo Nano camera attached to a magnetic mount

Osmo Nano attached to a magnetic ball-joint adapter mount.

Activation

Before first use, activate your camera using the DJI Mimo App:

  1. When the camera is attached to the vision dock, press and hold the camera button or vision dock button to power on.
  2. Scan the QR code on the screen to download the DJI Mimo App.
  3. Enable Wi-Fi and Bluetooth on your mobile device.
  4. Launch the DJI Mimo App, tap the camera icon to connect, and follow the in-app instructions to activate.

The DJI Mimo App allows you to monitor the camera view, set parameters, and control the camera remotely.

Note:

Operating the Product

Button Features

The default button functions can be customized by swiping down from the top of the screen, tapping the settings icon, and adjusting as needed.

Camera Button:

  • When powered off:
    • Press once: Power on and start recording (SnapShot). Press again to stop.
    • If vision dock is not used, camera powers off automatically after shooting.
    • If vision dock is used, camera powers off automatically after 3 seconds of idle time.
    • Press and hold: Power on.
  • When powered on:
    • Press once: Take a photo or start/stop recording.
    • Press twice: Switch to custom shooting mode and start shooting.
    • Press and hold: Power off.

Vision Dock Button:

  • Press and hold: Power on/off.
  • When powered on:
    • Press once: Take a photo or start/stop recording.
    • Press twice: Enter shooting mode quick switch page. Press again to cycle through preset shooting modes.

Operating the Touchscreen

After powering on, the touchscreen displays the live view. Key elements include:

  1. Storage Capacity/Remaining Recording Time
  2. Playback (swipe left from right edge to return to live view)
  3. Shooting Mode
  4. Camera Battery Level (tap to view levels of both camera and vision dock)
DJI Osmo Nano camera with vision dock, front view showing touchscreen interface

Touchscreen interface showing live view and controls.

Note:

  • Playback resolution is lower when the camera and vision dock are used separately, especially if they are far apart or experience interference.

Setting the Shooting Mode and Parameters

  1. Tap the icon or swipe left/right on the screen to enter the mode switch page.
  2. Swipe to select a shooting mode.
  3. Tap the selected mode or swipe up from the bottom to return to live view.
  4. Swipe up from the bottom of the screen to set parameters for the current shooting mode.

Video Mode Options:

  • Pre-Rec: Pre-records footage for a set duration before the shutter/record button is pressed, saving the latest pre-recorded footage with the current recording as one video.
  • Loop Recording: Records video by overwriting older footage at selected intervals, ideal for capturing unanticipated highlights.
  • EIS (Electronic Image Stabilization) Modes:
    • Off: Records with the largest Field of View (FOV).
    • RockSteady: Stabilizes footage while retaining movement dynamics, suitable for sports.
    • Horizon Correction: Eliminates image shakes within ±15° for horizontal stability.
    • Horizon Balancing: Eliminates image shakes within ±30° for horizontal stability, suitable for first-person perspective.

Pro Parameters:

  • Tap PRO to adjust advanced settings.
  • D-Log M: Designed for professional color grading in post-editing, enhancing dynamic range in high-contrast or multi-color scenes.
  • 10-bit color depth: Enables smoother color transitions.

Control Center

Swipe down from the top of the screen to access the control center. Swipe up from the bottom to return to live view. The control center allows you to:

  • Save current shooting settings as custom modes.
  • Set button functions.
  • Enable/disable Voice Prompt for mode switching.
  • Adjust Wireless Microphone settings.
  • Enable Built-in Mic Audio Backup (records audio as a separate .wav file).
  • Access general settings, brightness, and screen lock.
  • Enable Voice Control for camera commands.
  • Configure Auto Recording (camera powers off and starts recording based on preset triggers/intervals). To disable, stop recording with a button press, then stop the task in the control center.

Footage Storage and Transfer

The camera has built-in storage and supports expansion via a microSD card in the vision dock. Swipe down from the top of the screen and then left to check storage information. Tap 'Storage' to format internal or microSD storage.

DJI Osmo Nano camera with storage information on screen

Storage information displayed on the touchscreen.

Transferring Files:

  • To microSD Card: With the camera attached to the vision dock (lens forward), go to the storage space page and tap 'Export to SD card'.
  • To a Mobile Device: Connect to the DJI Mimo App, tap the album icon to preview and download. Alternatively, connect the camera (attached to vision dock, lens forward) to your mobile device via the provided cable and transfer files through the device's album or file management.
  • To a Computer: Attach the camera to the vision dock (lens forward) and connect to your computer via the provided cable. A pop-up will appear on the touchscreen; select a file transfer option. The camera cannot record or take photos during transfer. Reconnect if the transfer is interrupted.

Note:

  • Footage cannot be stored directly on the microSD card in the vision dock. It must be exported from the camera's internal storage.
  • Formatting permanently deletes all data. Back up all required data before formatting.

Maintenance

Underwater Usage

The Osmo Nano Camera is waterproof up to 10 meters. The multifunctional vision dock is NOT waterproof and must be removed before underwater use.

DJI Osmo Nano camera in water

Osmo Nano camera submerged in water.

Guidelines for Underwater Use:

  1. Ensure the lens protective cover is firmly mounted and its rubber ring is clean. Do not tamper with built-in waterproofing holes.
  2. Check the lens protective cover for damage; replace immediately if found. Keep the cover and lens dry and clean.
  3. Avoid jumping into water at high speed, as this may cause water seepage.
  4. Rinse the camera with tap water after underwater use and allow it to air dry. Wipe with a soft, dry cloth.
  5. DO NOT use hot air (e.g., hair dryer) to dry the camera, as this can damage the microphone membrane and built-in breathable membrane, compromising waterproofing.
  6. When changing the lens protective cover, ensure the camera is dry. If used in water, let it dry completely before changing to prevent fogging.

Cleaning

  1. DO NOT spill liquids containing alcohol or cleansing solution on the camera.
  2. If microphone holes, heat dissipation slots, or other parts are blocked by sand or foreign matter, rinse with fresh water while the camera is in a sealed waterproof state.
  3. DO NOT frequently remove the lens protective cover to prevent dust accumulation.
  4. Clean the lens with a lens cleaning pen, air blower, or lens cleaning cloth.
  5. Ensure quick-release slots are clear of dust and sand when attaching the Quick-Release Adapter Mount.
  6. Clean wet or dirty contacts with a soft, dry cloth before connection to avoid short circuits or corrosion.

Battery

  1. Discharge and charge the battery completely once every three months for optimal condition.
  2. When the battery voltage is too low, it enters low-power state. Charging exits this mode.
  3. DO NOT store the battery for extended periods after full discharge to prevent over-discharge and irreparable damage.
  4. For storage longer than 10 days, discharge the battery to 40-65% to extend its life.
DJI Osmo Nano camera and vision dock charging

Osmo Nano camera and vision dock connected for charging.

Troubleshooting

Firmware Update Issues

If a firmware update fails, try the following steps:

  1. Restart the camera and the DJI Mimo App.
  2. Ensure Wi-Fi and Bluetooth are enabled on your mobile device.
  3. Connect the camera to the DJI Mimo App and attempt the update again.
  4. If issues persist, contact DJI Support.

Connection Problems with DJI Mimo App

If you experience difficulty connecting to the DJI Mimo App:

  1. Verify that both Wi-Fi and Bluetooth are enabled on your mobile device.
  2. Ensure your DJI Mimo App is updated to the latest firmware version.
  3. In the live view, swipe down from the top of the screen and tap 'Wireless Connection' > 'Reset Connection'. This will reset all connections and Wi-Fi passwords.

Overheating

The camera and vision dock may become warm during use. This is normal. If it becomes excessively hot, allow it to cool down before continued use. For prolonged holding, consider using the protective case.

Specifications

The DJI Osmo Nano is a compact action camera designed for high-quality video and photo capture in various environments.

FeatureDetail
CategorySports & Action Video Cameras
Image Sensor1/1.3" Sensor, GC Series
Main ProcessorAmbarella H22 (4K/60FPS)
Effective MegaPixel>25MP
Video FormatMP4
Video Resolution4K/60fps, 4K/120fps (slow motion)
Field of View (FOV)143° Wide FOV
Color Performance10-bit & D-Log M
Image StabilizationElectronic Image Stabilization (EIS)
WaterproofYes (Camera up to 10m, Vision Dock IPX4-rated)
Touch ScreenYes
Memory Card TypeMicroSD / TF
Bluetooth SupportYes
Expand MicrophoneYes (Dual DJI Microphones Direct Connection)
Removable/Replaceable BatteryYes
Dimensions (Package)Length: 20cm, Width: 15cm, Height: 10cm
Weight (Package)0.4 kg

For a complete list of specifications, please visit www.dji.com/nano/specs.

User Tips

  • High Quality Output: Users report clear and professional video results, even from short clips, highlighting the camera's high quality and stabilization.
  • Portability: The camera is lightweight and easy to use, making it convenient for various activities.
  • Temperature: The camera may get warm during operation, whether used separately or with the vision dock. This is a normal characteristic of the device.
  • Value: Many users find the product to be worth its price due to its performance and features.

Warranty and Support

This content is subject to change without notice. For the latest version of this document and other resources, please visit:

QR code for DJI Nano downloads
Scan this QR code or visit www.dji.com/nano/downloads

If you have any questions about this document or your DJI Osmo Nano, please contact DJI Support by sending a message to DocSupport@dji.com.

DJI and OSMO are trademarks of DJI.
Copyright © 2025 DJI All Rights Reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.