ULTIMEA Skywave F30 Boom

Contents

ULTIMEA Skywave F30 Boom 3.1.2ch Dolby Atmos Soundbar User Manual

Model: U392B

Introduction

Thank you for choosing the ULTIMEA Skywave F30 Boom 3.1.2ch Dolby Atmos Soundbar. This manual provides essential information for setting up, operating, and maintaining your soundbar system. Please read it thoroughly before use and keep it for future reference.

ULTIMEA Skywave F30 Boom Soundbar and Subwoofer
The ULTIMEA Skywave F30 Boom 3.1.2ch Dolby Atmos Soundbar system.

What's in the Box

Please check that all items are present and in good condition:

  • Soundbar Power Adapter (2m/78") x1
  • HDMI Cable (1.5m/59") x1
  • Digital Optical Cable (1.5m/59") x1
  • 90-Degree HDMI Adapter x1
  • Remote Control x1
  • Bracket x2
  • Wall Anchors x4
  • Bracket Screw x2
Contents of the ULTIMEA Skywave F30 Boom package
Diagram showing all included accessories.

Setup Guide

1. Soundbar Assembly

The soundbar consists of two parts. Align the joints of the two parts and twist to connect them securely.

Diagram showing how to assemble the two halves of the soundbar
Step 1: Align the soundbar halves. Step 2: Twist to connect.
Dual-Unit Design of the soundbar
The soundbar features a dual-unit design for easy assembly.

2. Subwoofer Connection

Connect the RCA terminal of the cable from the subwoofer to the SUB OUT port on the soundbar. This wired connection ensures powerful and resonant low frequencies.

Diagram showing subwoofer connection to soundbar via SUB OUT port
Connect the subwoofer's RCA cable to the soundbar's SUB OUT port.

3. Connecting to TV

The soundbar offers multiple ways to connect to your TV:

Connect the HDMI cable between your TV's eARC/ARC port and the soundbar's HDMI to TV (eARC) port. Then, press "eARC" on the remote control to select the input. This connection supports up to 37Mbps bandwidth for lossless 3.1.2-channel audio.

Diagram showing HDMI eARC connection to TV and input selection on remote
Connect HDMI cable to TV's eARC/ARC port and soundbar's HDMI to TV (eARC) port. Select eARC input using the remote.

Optical Connection

Connect the optical cable between your TV's DIGITAL AUDIO OUT (OPTICAL) port and the soundbar's OPTICAL port. Then, press "OPT" on the remote control to select the input. Note: Optical input does not support Dolby Atmos.

Diagram showing Optical connection to TV and input selection on remote
Connect optical cable to TV's optical out and soundbar's optical input. Select OPT input using the remote.

4. Power Connection

Connect the soundbar power adapter to the DC IN port on the soundbar and then to a power outlet. Ensure all connections are secure.

Diagram showing power adapter connection to soundbar
Connect the power adapter to the soundbar and a power source.

5. Bluetooth Connection

To connect via Bluetooth, short press the Bluetooth button on the soundbar or remote to select the Bluetooth channel. Long press to disconnect. You can also manage Bluetooth connections through the Ultimea app.

Diagram showing Bluetooth connection process and remote control
Short press Bluetooth button to select, long press to disconnect. The Ultimea app can also manage connections.

Operating Instructions

1. Smart App Control

The ULTIMEA app allows you to customize your audio experience with a 10-band graphic EQ and 121 preset sound settings. It also supports seamless OTA updates for new features and optimal performance.

Smartphone screen showing Ultimea app interface for soundbar control
The Ultimea app provides comprehensive control over sound settings and firmware updates.
Smartphone screen showing 10-band graphic equalizer settings in Ultimea app
Adjust bass, midrange, and treble with the 10-band graphic equalizer in the app.
Smartphone screen showing 121 preset EQ matrices in Ultimea app
Explore 121 preset EQ matrices for various audio experiences.

2. Sound Modes and Enhancements

Experience immersive audio with various sound technologies:

  • Dolby Atmos: Enjoy multidimensional sound that envelops you from all directions, including overhead.
  • Xupmix: For non-Atmos content, activate Xupmix for one-touch immersive surround sound.
  • VoiceMX Technology: Enhances vocal clarity in any scene, ensuring clear dialogue.
  • BassMX Technology: The 6.5-inch wired subwoofer delivers powerful and resonant low frequencies with extended bass response down to 38Hz.
Video demonstrating the immersive sound experience of the Skywave F30 Boom soundbar with Dolby Atmos and Xupmix technology.
Diagram illustrating 3.1.2 channel Dolby Atmos soundbar with sound waves
The 3.1.2 channel system creates a multidimensional sound experience.
Diagram illustrating overhead audio experience with Dolby Atmos
Experience true overhead audio with Dolby Atmos.
Close-up of up-firing drivers for precise vertical sound
Precise vertical sound is achieved with up-firing channels.
Image of 6.5 inch wired subwoofer with BassMX technology
The 6.5-inch wired subwoofer with BassMX technology provides deeper bass resonance.
Image illustrating VoiceMX technology for smart dialogue enhancement
VoiceMX technology ensures smart dialogue enhancement for clear vocals.

3. CEC Function

With CEC (Consumer Electronics Control), your TV and soundbar can work together. Power, volume, and input can sync automatically for effortless control when connected via HDMI eARC.

Hand holding remote control with CEC function highlighted
The remote control supports CEC function for integrated control.

Specifications

FeatureSpecification
ModelU392B
Sound System3.1.2 Channel
Power SupplyDC 24V 3A (Soundbar)
Drivers3.4" x 1.5" x 3 (Soundbar) + 1.75" x 2 (Soundbar) + 6.5" (Subwoofer)
Standby Power< 0.5W
Operating Temperature-10°C to 45°C (14°F to 113°F)
Frequency Response45Hz - 18kHz (-6dB)
Audio InputsHDMI, Optical, Bluetooth, USB
Soundbar Dimensions (W x H x D)800 x 46 x 90 mm (31.5" x 1.81" x 3.54")
Subwoofer Dimensions (W x H x D)200 x 315 x 234 mm (7.87" x 12.40" x 9.21")
Packaging Dimensions (W x H x D)330 x 440 x 250 mm (12.99" x 17.32" x 9.84")
Packaging Weight7.6 kg (16.76 lbs)
Bluetooth Version5.4
Max Bluetooth Transmit Power6.53dBm
Voltage RangeUSB (5-20V DC)
Input Power (W)300-399 W
PMPO360
MaterialWooden (Subwoofer), Plastic (Soundbar Cabinet)
CertificationsCE, FCC, RoHS

Power Consumption and Wireless Connection Setup Guide

This equipment complies with European COMMISSION REGULATION (EU) 2023/826.

  • Off: N/A
  • Standby (when all wireless connections are deactivated): < 0.5 W
  • The duration for the device to enter standby mode can be set in the app. Changing this setting may lead to a significant increase in energy consumption, negatively impacting the environment.
  • The power management function automatically switches the equipment to standby mode after 15 minutes of inactivity (no playback or operation) and when neither Bluetooth nor the app is connected.

Activating Wireless Network Connections:

  1. Set up the equipment properly.
  2. Switch into wireless mode (Bluetooth).
  3. Connect with energy-consuming products (e.g., players/game consoles/STB (Set-Top Boxes)/phones/tablets/PCs).

Deactivating Wireless Network Connections:

  1. Switch to another channel besides Bluetooth.
  2. Then long press the power button on the remote control for more than 3 seconds.

Maintenance

To ensure the longevity and optimal performance of your soundbar system, follow these maintenance guidelines:

  • Cleaning: Clean the device only with a dry cloth. Do not use liquid cleaners, as they may damage the components.
  • Ventilation: Do not block ventilation openings or install the device in an enclosed space. Ensure proper ventilation and install according to the manufacturer's instructions. Do not cover the ventilation openings with items such as newspapers or curtains.
  • Placement: Do not install the device near heat sources such as radiators, stoves, or amplifiers.
  • Power Cord: Protect the power cord from being pinched, stepped on, or bent, especially at plugs, outlets, and the point where it exits the device.

Troubleshooting

If you encounter issues with your ULTIMEA Skywave F30 Boom soundbar, refer to the following common problems and solutions:

ProblemPossible Solution
No sound from the soundbar.
  • Ensure the soundbar is powered on and connected correctly to the TV.
  • Check the input source on the soundbar matches the TV output (e.g., HDMI eARC, Optical).
  • Verify the volume levels on both the soundbar and TV are not muted or too low.
  • If using Optical, ensure your TV's audio output is set to PCM.
No Dolby Atmos sound.
  • Ensure you are connected via HDMI eARC. Optical input does not support Dolby Atmos.
  • Verify your TV and content support Dolby Atmos.
  • Check your TV's audio settings to ensure Dolby Atmos output is enabled.
Bluetooth connection issues.
  • Ensure the soundbar is in Bluetooth pairing mode.
  • Check that your device's Bluetooth is enabled and within range (<10m/33ft).
  • Forget the soundbar from your device's Bluetooth list and try pairing again.
  • Long press the Bluetooth button on the soundbar/remote to disconnect any existing connections before pairing a new device.
Remote control not working.
  • Ensure the batteries are correctly inserted and not depleted.
  • Check for any obstructions between the remote and the soundbar's IR receiver.
  • Point the remote directly at the soundbar.
Sound distortion or poor quality.
  • Check all cable connections for looseness or damage.
  • Try adjusting the EQ settings via the Ultimea app.
  • Ensure the audio source is of good quality.

User Tips

  • Optimal Placement: For the best surround sound experience, place the soundbar centrally below your TV and ensure the up-firing speakers are not obstructed. The subwoofer can be placed anywhere in the room, but often performs best in a corner or near a wall.
  • App Customization: Explore the Ultimea app's extensive EQ settings and preset matrices to tailor the sound to your preferences for different content types (movies, music, games).
  • Firmware Updates: Regularly check the Ultimea app for firmware updates. These updates can improve performance, add new features, and resolve potential issues.
  • HDMI eARC for Best Quality: Always use the HDMI eARC connection for the highest quality audio, especially when enjoying Dolby Atmos content, as it supports lossless audio transmission.
  • CEC Convenience: Utilize the CEC function by enabling it on your TV and soundbar. This allows you to control basic functions like power and volume with a single remote.

Important Safety Instructions

Please read and retain this manual. Follow all warnings and operate according to the instructions.

  1. Do not use the device near water sources, in damp environments, or in the rain. Avoid splashing liquids or placing objects containing liquids (such as vases) on the device.
  2. Clean only with a dry cloth. Do not use liquid cleaners.
  3. Do not block ventilation openings or install the device in an enclosed space. Ensure proper ventilation and install according to the manufacturer's instructions.
  4. Do not install the device near heat sources such as radiators, stoves, or amplifiers. Do not cover the ventilation openings with items such as newspapers or curtains.
  5. Use only attachments, stands, or accessories specified by the manufacturer. When using a device with wheels, move with care to avoid tipping.
  6. Protect the power cord from being pinched, stepped on, or bent, especially at plugs, outlets, and the point where it exits the device.
  7. Do not alter the polarized or grounding-type plug. If the plug does not fit into the outlet, consult an electrician to replace the outlet.
  8. Unplug the device during lightning storms or when unused for long periods. To fully disconnect power, unplug the device from the wall outlet and ensure the plug is accessible.
  9. Do not place any open flame sources (such as lit candles) on or near the device.
  10. Do not attempt to open the device. High voltage inside may be fatal. There are no user-serviceable parts inside. All servicing must be performed by qualified personnel.
  11. The installation height of the device must not exceed 2 meters.

Proper Disposal Instructions

This mark on the product or its packaging indicates that this product should not be disposed of with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Waste Electrical & Electronic Equipment (WEEE)

Household users should contact their retailer or local government office for details on environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Regulatory Compliance and Trademarks

EU Declaration of Conformity

ULTIMEA Technology (Shenzhen) Limited declares that the product Model No.: U392B (Soundbar) is in conformity with the essential requirements of the Radio Equipment Directive (2014/53/EU), Restriction of Hazardous Substances Directive (2011/65/EU), Electromagnetic Compatibility Directive (2014/30/EU), and Low Voltage Directive (2014/35/EU). The product is responsible for affixing the CE marking.

FCC Regulatory Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

ISED Warnings

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Trademarks

  • Dolby Atmos: Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation.
  • Bluetooth®: The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and used under license.
  • HDMI™: The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Warranty and Support

For support, please contact ULTIMEA customer service:

  • US: +1 888-598-8875 (Mon-Fri 9am-5pm PST)
  • EU: +49 89-628-25828 (Mon-Fri 9am-5pm CET)
  • Email: support@ultimea.com
  • Website: support.ultimea.com

You can also scan the QR code to download the Ultimea App or check out extended warranty options.

QR code for Ultimea App and Warranty Extension
Scan for Ultimea App and Warranty Extension Plan.

A user manual in PDF format is available for download at https://manuals.plus/m/1f3eb46fbcbf147123326fd671016620317cfa6114cb163ff91bd0dff497052b.

© 2024 ULTIMEA. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.