1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your KHUDAYAROV c92 HD 4-in-1 2MP Starlight CCTV Camera. This versatile camera supports AHD, TVI, CVI, and CVBS video output modes, offering high-definition surveillance with excellent low-light performance thanks to its Starlight sensor and 36 IR LEDs.
Figure 1: KHUDAYAROV c92 HD 4-in-1 2MP Starlight CCTV Camera
2. Safety Information
⚠ Disclaimer: Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
- Ensure proper power supply (DC12V/1A) to prevent damage.
- Do not expose the camera to extreme temperatures or humidity outside its specified operating range.
- Avoid direct exposure of the lens to strong light sources for extended periods.
- Installation should be performed by qualified personnel if you are unsure about electrical wiring.
3. Package Contents
Please check the package carefully to ensure all items are present and in good condition:
- 1x KHUDAYAROV c92 1080p 2MP AHD TVI CVI CVBS 4-in-1 Starlight CCTV Camera
Note: Power supply (DC12V/1A) is not included and must be purchased separately.
4. Specifications
| Feature | Description |
|---|---|
| Brand Name | KHUDAYAROV |
| Model Number | c92 |
| Sensor | 1/2.9" NVP2441 + IMX307 / IMX323 CCD (Sony Sensor Brand) |
| Megapixels | 2 MP (2.0 Megapixels) |
| Effective Pixel | 1920(H)*1080(V) |
| Frame Rate (FPS) | 1080P/25fps, 1080P/30fps |
| Format | PAL/NTSC (selectable via OSD menu) |
| Minimum Illumination | 0.0001Lux/(F1.2, AGC ON), 0LUX with IR |
| Shutter | AUTO |
| Day/Night Mode | EXT (Default) / AUTO / COLOR / B/W (Infrared/Internal AUTO/Color/B&W) |
| Synchronously | Internal |
| Video Output | AHD/TVI/CVI/CVBS switch (1080p for AHD, CVI, TVI) |
| Exposure | Brightness / Exposure Mode / GAIN |
| White Balance | ATW/MWB |
| Video Settings | Contrast/Sharpness/Color/GAIN/DNR/Format/WDR |
| Language (OSD) | CHN1/ESPANOL/CHN2/ITALIANO/ENGLISH/RUS/FRA/JAP/GER/SPA/POL/POR/NED/TUR |
| Operating Temperature | -20℃ to 60℃ |
| Working Humidity | Relative humidity less than 90 % |
| Power Supply | DC12V / 1A |
| Power Consumption | 12V/1A |
| Weight | 0.4kg |
| Lens (mm) | 2.8mm, 3.6mm, 4mm, 6mm, 8mm, 12mm (Optical zoom) |
| Viewing Angle | 90° |
| Connectivity | Closed System/CCTV Wired |
| Style | Bullet Camera |
| Special Features | Waterproof / Weatherproof |
| Shell Material | Plastic |
| Installation | Normal |
Figure 2: Detailed Specifications Table
5. Setup
5.1. Physical Installation
- Choose a Location: Select a suitable location for your bullet camera, considering the desired viewing angle (90°) and ensuring it is within reach of power and video cables. The camera is waterproof/weatherproof, making it suitable for outdoor use.
- Mounting: Securely attach the camera to a wall or ceiling using appropriate screws and anchors. Adjust the mounting bracket to achieve the desired camera orientation.
- Cable Routing: Route the power and video cables to your DVR/monitor and power source, ensuring they are protected from environmental damage.
5.2. Wiring Connections
Connect the camera to your DVR or monitor using the provided video output cable and connect the power cable to a DC12V/1A power adapter (not included).
Figure 3: Power and Video Output Connectors with OSD Switch
5.3. Video Mode Switching (4-in-1 Functionality)
This camera supports AHD, TVI, CVI, and CVBS video output modes. The default mode is AHD 1080P. To switch between modes:
- Turn on the power to the camera.
- Locate the OSD switch on the camera's cable (refer to Figure 3).
- Press and hold the direction key on the OSD switch for approximately 5 seconds to select the desired signal type:
- UP: AHD
- DOWN: HD-CVI
- LEFT: HD-TVI
- RIGHT: CVBS (960H)
- Ensure the selected mode matches the input type of your DVR.
5.4. PAL/NTSC System Selection
The camera supports both PAL and NTSC video systems. To set the system:
- Access the OSD menu by pressing the 'MENU' button on the OSD switch.
- Navigate through the menu options to find the PAL/NTSC setting and select the appropriate system for your region.
6. Operating Instructions
6.1. Basic Operation
Once the camera is powered on and connected to a compatible DVR/monitor, it will automatically begin capturing video in the selected mode. The 36 IR LEDs will activate automatically in low-light conditions to provide night vision.
6.2. OSD Menu Control
The On-Screen Display (OSD) menu allows for advanced configuration of camera settings. To access and navigate the OSD menu:
- Press the 'MENU' button on the OSD switch (refer to Figure 3).
- Use the UP/DOWN/LEFT/RIGHT direction keys to navigate through the menu options.
- Press 'MENU' again to confirm a selection or exit a sub-menu.
6.3. Key OSD Settings
- Video Settings: Adjust Contrast, Sharpness, Color, GAIN, DNR (Digital Noise Reduction), Format, and WDR (Wide Dynamic Range) to optimize image quality.
- Day/Night Mode: Configure the IR-CUT switch and CDS (Cadmium Sulfide) control for automatic or manual day/night switching. Options include EXT (External), AUTO, COLOR, and B/W.
- Exposure: Fine-tune Brightness, Exposure Mode, and GAIN for optimal lighting.
- White Balance: Select ATW (Auto Tracking White Balance) or MWB (Manual White Balance) for accurate color reproduction.
- UTC Function: Utilize the UTC (Up The Coax) function for remote OSD control via compatible DVRs.
7. Maintenance
- Cleaning: Regularly clean the camera lens and housing with a soft, dry cloth to remove dust and dirt. For stubborn marks, use a lens cleaning solution designed for optics. Do not use abrasive cleaners.
- Environmental Conditions: Ensure the camera operates within the specified temperature (-20℃ to 60℃) and humidity (less than 90%) ranges to prolong its lifespan.
- Cable Inspection: Periodically check all cable connections for signs of wear, corrosion, or damage. Ensure connections are secure.
- Firmware Updates: Check with the manufacturer's support for any available firmware updates that may improve performance or add features.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No video output | No power; Incorrect video mode; Loose cable connection | Check power supply; Verify video mode matches DVR input (Section 5.3); Secure all cable connections. |
| Poor image quality (blurry/distorted) | Dirty lens; Incorrect OSD settings; Lens out of focus | Clean the lens; Adjust Contrast, Sharpness, DNR in OSD menu; Manually adjust lens focus if applicable. |
| Night vision (IR LEDs) not working | D/N Mode set incorrectly; Insufficient power | Check D/N Mode settings in OSD menu (set to AUTO or B/W); Ensure stable 12V/1A power supply. |
| Color distortion | Incorrect White Balance setting | Adjust White Balance (ATW/MWB) in the OSD menu. |
9. User Tips
- Match Video Modes: Always ensure the camera's output mode (AHD, TVI, CVI, CVBS) is compatible with and correctly set for your DVR's input channels. This is a common cause of 'no video' issues.
- Optimal Lens Selection: If your camera has interchangeable lenses or adjustable focus, choose the lens (e.g., 2.8mm for wide view, 12mm for narrow/telephoto) that best suits your surveillance area.
- OSD Menu Exploration: Don't hesitate to explore the OSD menu. Many image quality and operational parameters can be fine-tuned there to achieve the best performance for your specific environment.
- Power Supply Quality: Use a stable and reliable DC12V/1A power supply. Fluctuations or insufficient power can lead to unstable operation or poor image quality, especially for IR LEDs.
10. Warranty and Support
This product comes with a One Year Warranty. If the item is found to be defective, please notify us within 5 days of delivery for replacement service.
For further detailed instructions, diagrams, or advanced configurations, please refer to the official user manual PDF: