Introduction
Dear valued customer, thank you for purchasing the SUPERFIRE S3 Mini LED Flashlight. This manual provides important information regarding the safe and efficient use, setup, operation, and maintenance of your new flashlight. Please read it carefully before using the product and keep it for future reference.
Safety Precautions
- The product may get hot in strong light mode; this is normal.
- Do not illuminate eyes directly with the flashlight to avoid irritation caused by strong light.
- Do not disassemble the flashlight components to prevent product damage.
- Charge the flashlight when using it for the first time or if it has not been used for a long time.
- Install the battery into the flashlight in the correct direction to avoid damage.
- Keep the flashlight away from fire or corrosive solutions.
- Ensure the battery skin is intact during use. Damaged battery skin may cause short circuits, fire, or explosions.
Package Contents
Please check the package for the following items:
- 1 x SUPERFIRE S3 Mini LED Flashlight
- 1 x USB Charging Cable
Specifications
| Feature | Detail |
|---|---|
| Model | S3 |
| Lamp Beads | SH-X02 |
| Power | 3W |
| Lumen | 125LM (Real test data) |
| Lighting Modes | 5 Modes (High, Medium, Low, Strobe, SOS) |
| Charging Port | Type-C |
| Max Lighting Distance | Approx. 220 meters |
| Runtime | Approx. 2.5 hours |
| Battery Capacity | 800mAh (18650 type) |
| Body Material | Aluminum Alloy |
| Weight | Approx. 150g |
| Product Dimensions | 115mm (Length) x 26mm (Width) x 23mm (Head Diameter) |
| Charging Voltage | 5V/1A (Fast charging not supported) |
| Waterproof | Yes |
| Zoom Function | Adjustable Focal Length |
| Light Source | LED bulbs |
| Certification | CE |
Initial Setup
Battery Installation
- Unscrew the tail cap of the flashlight.
- Remove any white circular insulating sheet or transparent film from the battery.
- Insert the 18650 battery into the flashlight with the correct polarity (positive end towards the head).
- Screw the tail cap back on securely.
First Use and Charging
Upon first receiving the flashlight, it is recommended to fully charge it before use. Refer to the 'Charging' section for detailed instructions.
Operation
Power On/Off and Mode Switching
- Power On/Off: Press the tail switch button firmly (full press) to turn the flashlight on or off.
- Mode Switching: While the flashlight is on, lightly press (half press) the tail switch button to cycle through the five lighting modes: Strong Light → Medium Light → Weak Light → Strobe → SOS.
- For most products, you can also press and hold the switch for 2-3 seconds to power off from any mode.
Zoom Function
The S3 flashlight features a zoomable head. Push and pull the head of the flashlight to adjust the spot size, allowing you to switch between a focused beam and a wider floodlight.
Usage Scenarios
The SUPERFIRE S3 is versatile for various situations:
- Emergency repairs
- Dog walking
- Outdoor adventures
- Camping
- Industrial maintenance
- Outdoor lighting
Charging
To charge your SUPERFIRE S3 flashlight:
- Connect the micro USB end of the provided USB cable to the flashlight's charging port.
- Connect the other end of the USB cable to a 5V/1A USB charger or other USB device (e.g., computer, power bank).
- The indicator light (located around or at the switch button) will turn red or blink red to indicate that the battery is low or currently charging.
- Once fully charged, the indicator light will turn stable blue or green.
Important Note: Fast charging chargers are not supported and may prevent normal charging.
Maintenance
- Clean the flashlight body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Ensure the charging port is free from dust and debris to maintain proper charging functionality.
- Store the flashlight in a cool, dry place when not in use for extended periods.
Troubleshooting
- Flashlight not turning on: Ensure the battery is correctly installed and any insulating sheets/films have been removed. Check if the battery is charged.
- Flashlight not charging: Verify that you are using a 5V/1A charger. Fast charging adapters are not compatible. Check the USB cable and connections.
- Light output is dim: The battery may be low. Recharge the flashlight.
If you encounter any other problems, please contact customer support for assistance.
User Tips
- The flashlight is generally of good quality and durable.
- Be aware that the flashlight does not have a memory function for modes; it will start in the first mode (Strong Light) each time it is turned on.
- While powerful for its size, manage expectations regarding maximum brightness for very large areas.
Warranty and Support
Your SUPERFIRE S3 Flashlight comes with a 1-year manufacturer's warranty. We also offer free technical support and spare parts.
If you receive goods with problems, please contact us within 3 days with clear photos or video. Returns can be requested within the first 15 days of receipt for a refund. Contact us for more return information.
For any inquiries or support, please refer to the contact information provided on your warranty card or contact the seller directly.
Warranty Card Information:
- User Name: [Fill in]
- Phone Number: [Fill in]
- E-mail: [Fill in]
- Address: [Fill in]
- Other Contacts: [Fill in]
- Release Date: [Fill in]
For a digital copy of the user manual, please refer to the official product page or contact customer support. The PDF manual can be referenced at: User manual (PDF)