Aramox Portable Electric Heater Fan

Contents

User Manual: Portable Electric Heater Fan

Model: Portable Electric Heater Fan

1. Important Safety Information

WARNING: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.
  • Fire Risk: Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
  • Battery Disposal: For disposal, please check your local authority's website for information and dispose of the lithium-ion battery safely in accordance with applicable legal requirements.
  • Protective Equipment: While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

2. Product Overview

The Portable Electric Heater Fan is a compact and versatile heating device designed for various applications, including car window defogging, personal warming in offices, and general indoor use. It features a portable, battery-powered design for convenience.

Portable Electric Heater Fan with warm air blowing

Figure 1: Portable Electric Heater Fan, suitable for winter defrosting and keeping warm.

Portable Electric Heater Fan with battery pack and charger

Figure 2: Heater unit, rechargeable battery pack, and power adapter.

3. Setup

  1. Unpacking: Carefully remove the heater fan and all accessories from the packaging.
  2. Protective Films: Before first use, remove any protective films from the device.
  3. Battery Installation: Insert the provided rechargeable battery pack into the base of the heater unit until it clicks securely into place.
  4. Charging: Connect the provided USB cable to the heater (if applicable, or directly to the battery charger) and plug the charger into a certified 5V power adapter. Ensure the battery is fully charged before first use for optimal performance.
  5. Placement: Place the heater on a stable, flat surface. For car use, it can be positioned on the dashboard or a suitable flat area, ensuring it does not obstruct your view or interfere with driving controls.
Compact and Portable Heater in use, warming hands

Figure 3: The compact and portable design allows for easy placement in various locations.

4. Operating Instructions

  1. Power On: Press and hold the power button (usually located on the unit) for 3 seconds to turn on the device.
  2. Mode Selection: Short press the power button to cycle through available heating modes or fan speeds (if applicable).
  3. Defogging Car Windows: Aim the heater directly at the foggy or frosty car window. The powerful airflow will effectively clear the visibility.
  4. Personal Warming: Position the heater to direct warm air towards yourself in an office, workshop, or any indoor space.
  5. Power Off: Press and hold the power button again for 3 seconds to turn off the device.
Heater addressing various car conditions like fog, frost, rain, and cold

Figure 4: The heater effectively combats window fogging, frost, rainy day visibility issues, and cold interiors.

Before and after view of a car window being defogged by the heater

Figure 5: Visual demonstration of the heater's defogging capability on a car window.

5. Maintenance

  • Cleaning: Ensure the device is turned off and unplugged (if charging) before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Storage: When not in use, turn off the device and store it in a dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge it regularly, even if not in constant use.

6. Troubleshooting

ProblemPossible CauseSolution
Device does not turn onBattery is not charged or not properly installed.Ensure the battery is fully charged and correctly inserted into the unit.
Heater not producing warm airLow battery charge; unit is in fan-only mode (if applicable).Recharge the battery. Short press the power button to cycle through modes and select a heating mode.
Reduced operating timeBattery not fully charged; battery degradation over time.Ensure battery is fully charged. If battery life has significantly decreased, consider replacing the battery pack.

7. Specifications

FeatureDetail
ModelPortable Electric Heater Fan
BrandAramox
Power SourceBattery Powered (Rechargeable Li-battery)
Electric Heater TypeConvector Heater
Power (W)170W
Battery Capacity1500mAh
Battery Voltage21V
Product SizeApprox. 11.5 x 11.5 cm (4.5 x 4.5 inches)
WeightApprox. 625 g (22.05 oz)
MaterialABS
Intended UseCar, Office, Indoor Use

8. User Tips

  • For optimal defogging, aim the heater directly at the affected area of the windshield.
  • To maximize battery life during extended use, ensure the battery is fully charged before each session.
  • The compact size makes it ideal for personal heating; keep it within a comfortable distance for best results.

9. Warranty and Support

For product support, warranty claims, or technical assistance, please contact the manufacturer directly:

Manufacturer: Shenzhen Shenhuo Mingchuang Lighting Co., Ltd.
Address: 9H, Building 10, Waterfront Garden, Sino-Ocean Xintiandi, No.14 Shenglong Road, Shengping Community, Longcheng Street, Longgang District, Shenzhen, Guangdong, China
Phone: 13513256222
Email: syumnsdkg@163.com

EU Authorized Representative: Kequ Technology s.r.o.
Address: Pražákova 1008/69, Štýřice, 63900 Brno, Jihomoravský kraj, Czech Republic

Please retain your proof of purchase for any warranty-related inquiries.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.