Medcursor MDFM400

Contents

Medcursor Shiatsu Foot Massager Machine

Model: MDFM400

Wellness Innovation

Introduction

Thank you for choosing the Medcursor Shiatsu Foot Massager. This user manual provides important safety instructions, operational guidelines, maintenance tips, and troubleshooting information to ensure optimal performance and longevity of your device. Please read this manual carefully before use.

If you encounter any problems with the product, please contact support@medcursor.com for assistance.

Important Safety Information

Danger: To reduce the risk of burns, fire, electric shock, or other injuries, please follow all instructions and safety guidelines. Read all instructions before using.

General Safety Precautions:

  • Always unplug this massager from the electrical outlet immediately after using and before cleaning.
  • Examine your massager's fabric covering for any sign of damage before using. If there are any blisters, tears, or cracks, do not use your massager.
  • Never use pins or other metallic fasteners with this massager.
  • Keep it dry. Do not use the massager if it is wet.

Usage Warnings:

  • Do not leave your massager unattended when plugged in. Unplug when not in use, and connect all parts or attachments before connecting the device to the power outlet.
  • Do not operate under a blanket or pillow. Overheating can occur causing fire, electric shock, or other injuries.
  • Close supervision is necessary when your massager is used by or near children or persons with disabilities.
  • Do not use the massager if it has been dropped, if it is not working properly, or if any of its parts (including the cord or plug) are damaged. Please contact Customer Support.
  • Do not use the massager if it gets wet. Make sure that the foot cloth cover is also dry and clean.
  • Turn off and stop using the massager immediately if it makes an unusual noise, emits a strange smell, or if smoke comes out of it. Contact Customer Support.
  • Do not carry the massager by the cord.
  • Do not use this massager for more than 30 minutes at a time.
  • Only use while seated.
  • Do not stand on the massager or place heavy objects on it.
  • Do not remove the housing or the cloth cover when operating the device.
  • Do not try to repair the massager. Contact Customer Support if the massager is malfunctioning.
  • Positioning your feet on the massager incorrectly or applying excess pressure may result in pain or injury. This may also damage the massage nodes.
  • Children are not allowed to play with the device.
  • People who are sensitive to heat should be careful when using the unit.
  • Use the device only with the supplied equipment.

Specifications

AttributeValue
Product NameMedcursor Foot Massager
Model NumberMDFM400
Item TypeMassage & Relaxation
ApplicationFoot
Product DimensionAbout 14.37 x 6.89 x 13.78 inches
Product WeightAbout 2.85 kg (6.28 lbs)
MaterialComposite Material
Power SupplyInput: AC 100-240V, 50-60Hz / Output: DV 12V, 2.5A
Rated Power30 watts
Runtime15 minutes (automatic shut-off)
Suitable Feet SizeUp to US size 11 (EU size 45)
OriginMainland China
CertificationFCC

Structure Diagram

Familiarize yourself with the components of your Medcursor Foot Massager.

Diagram of the Medcursor Foot Massager showing its main parts.
Diagram of the foot massager with labels: 1. Control panel, 2. Foot slot, 3. Cloth cover.

Control Panel Overview

Close-up of the control panel with buttons for Power, Heat, Air Intensity, and Mode.
Close-up of the control panel. Buttons include Power On/Off, Heating Button On/Off, Switch Air Pressure Gear (L/H), and Switch Massage Mode (M1, M2, M3).
ButtonFunction
PowerPress this button to turn on the device. Press again at any time to turn off the massager.
HeatPress heat button to turn on/off the heating function.
Air IntensityPress the Air Intensity button to adjust the air pressure level (L for low, H for high).
ModePress the mode button to change the massage mode.

Operation Guide

Follow these steps to operate your foot massager:

  1. Connect the plug to a power source. The massager will be in standby mode.
  2. Press the Power button. The Power indicator light will illuminate, and the unit will start in MASSAGE MODE 1.
  3. Press the Heat button to turn on or off the heating function.
  4. Press the Air Intensity button to adjust the air pressure. Two levels are available:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.