BioloMix Cold Press Juicer SJ-017 User Manual

1. Introduction

Thank you for choosing the BioloMix Cold Press Juicer SJ-017. This slow masticating juicer is designed to extract maximum nutrients and flavor from your fruits and vegetables with its powerful 200W motor and wide 78mm feed chute. Please read this manual carefully before using the appliance to ensure safe and optimal operation. Keep this manual for future reference.

Figure 1: BioloMix Cold Press Juicer SJ-017

2. Important Safety Instructions

• Read all instructions before use.
• Do not immerse the motor base in water or other liquids.
• Unplug from outlet when not in use, before assembling or disassembling parts, and before cleaning.
• Keep hands and utensils away from moving parts during operation to prevent injury.
• Never push food with your fingers. Always use the food pusher provided.
• Do not operate the appliance if the cord or plug is damaged, or if the appliance malfunctions or is dropped.
• Ensure all parts are correctly assembled and locked before operating.
• Do not use outdoors.
• This appliance is for household use only.
• Do not process frozen fruits, ice, or ingredients with hard seeds/pits (e.g., avocado pits, peach pits) without removing them first.

3. Parts List

Familiarize yourself with the components of your BioloMix Cold Press Juicer:

1. Motor Base (with control panel)
2. Juicing Bowl
3. Filter/Strainer
4. Auger/Squeezing Screw
5. Hopper/Feeding Chute Lid (with 78mm wide opening)
6. Food Pusher
7. Juice Cup
8. Pulp Container
9. Cleaning Brush
10. Magic Plug (Anti-drip cap on juice spout)

4. Setup and Assembly

Before first use, wash all removable parts (except the motor base) in warm soapy water, rinse thoroughly, and dry.

1. Place the Motor Base on a stable, flat, and dry surface.
2. Align the Juicing Bowl with the motor base and place it securely.
3. Insert the Filter into the Juicing Bowl, ensuring it sits firmly.
4. Place the Auger/Squeezing Screw into the center of the filter, pressing down until it clicks into place.
5. Position the Hopper/Feeding Chute Lid onto the juicing bowl, aligning the arrow on the lid with the arrow on the juicing bowl. Rotate clockwise until it locks securely.
6. Place the Juice Cup under the juice spout and the Pulp Container under the pulp outlet.

5. Operating Instructions

5.1. Ingredient Preparation

• Wash all fruits and vegetables thoroughly.
• The wide 78mm feed chute allows for whole fruits like apples, reducing prep time.
• For very hard or fibrous ingredients (e.g., carrots, celery), cut them into smaller pieces (approx. 1-2 inches) to prevent jamming and ensure efficient extraction.
• Remove all hard seeds, pits, and thick skins (e.g., citrus peels, pineapple skin) before juicing.

Figure 2: Wide 78mm (3.07 inch) Feed Chute for whole fruits, minimizing prep time.

5.2. Juicing Process

1. Ensure the Magic Plug (anti-drip cap) on the juice spout is in the open position (pointing downwards) to allow juice to flow into the cup.
2. Plug the juicer into a power outlet.
3. Press the