ggbingo A60-9W

Contents

E27 RGB LED Light Bulb User Manual

Brand: ggbinbo | Model: A60-9W

E27 RGB LED Light Bulb with remote control showing 16 colors

Image: E27 RGB LED Light Bulb with its infrared remote control, highlighting its 16-color capability.

Safety & Warnings

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.

Setup

Your E27 RGB LED Light Bulb is designed for easy installation.

  1. Ensure the power to the light fixture is turned off at the switch before installation.
  2. Carefully screw the E27 RGB LED Light Bulb into a compatible E27 light socket. Do not overtighten.
  3. Turn on the power to the light fixture. The bulb should illuminate in its default white light mode.
  4. Ensure the remote control has a working battery (typically a CR2025 coin cell, not explicitly stated but common for IR remotes).
E27 RGB LED Light Bulb screwed into a lamp socket

Image: The E27 RGB LED Light Bulb securely installed in a standard lamp socket.

Operating Instructions

Control your E27 RGB LED Light Bulb using the included 24-key infrared remote control.

Remote Control Functions:

Diagram of 24-key infrared remote control with labeled buttons

Image: A detailed diagram of the 24-key infrared remote control, showing the layout and function of each button.

  • Brightness Adjustment: Use the sun icon buttons (up/down) to increase or decrease the light intensity.
  • Switch (ON/OFF): Press 'ON' to turn the bulb on and 'OFF' to turn it off.
  • White Light (W): Press 'W' to activate the pure white light mode.
  • Color Selection: The 15 colored buttons allow you to select specific static colors.
  • Flash: Activates a rapid flashing mode, alternating colors.
  • Strobe: Activates a quick gradient mode, smoothly transitioning between colors.
  • Fade: Activates a slow gradient mode, with gradual color transitions.
  • Smooth: Activates a color block alternating mode, switching between colors in blocks.

Product Demonstration:

Video: A short demonstration of the E27 RGB LED Light Bulb changing colors and modes using the remote control.

Maintenance

To ensure the longevity and optimal performance of your LED bulb:

  • Cleaning: Disconnect power before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Storage: If storing the bulb for an extended period, keep it in a cool, dry place away from direct sunlight and moisture.
  • Safety: Do not attempt to disassemble or modify the bulb. This will void the warranty and may cause damage or injury.

Troubleshooting

If you encounter any issues with your E27 RGB LED Light Bulb, please refer to the following common solutions:

ProblemPossible CauseSolution
Bulb does not light upNo power to the socket; Bulb not screwed in properly; Bulb is faulty.Check power switch and circuit breaker; Ensure bulb is securely screwed in; Test bulb in another working socket.
Remote control not workingRemote battery is dead or incorrectly inserted; Obstruction between remote and bulb; Remote is too far from the bulb.Replace remote battery (CR2025 type); Ensure clear line of sight to the bulb; Operate remote within a reasonable range (typically up to 5 meters).
Colors are incorrect or flickeringTemporary software glitch; Power fluctuation.Turn the bulb off and on again using the main power switch to reset it.

Specifications

Product Specifications
ModelA60-9W
Base TypeE27
Voltage90-220V
Power7W/9W
Color Output16 Colors (including White)
Control Method24-key Infrared Remote Control
MaterialABS Plastic Aluminum
Size12.5 × 6 cm
Luminous Flux60-249 Lumens
Color Temperature2700K~6500K
CertificationsCE, EMC, RoHS

User Tips

Based on user feedback, here are some tips to enhance your experience:

  • Users consistently praise the vibrant and functional color options, noting that all colors work well and provide extraordinary lighting.
  • The bulb is appreciated for its high-quality lighting and ease of installation.
  • Many users find the product to be exactly as described, offering great value and functionality.

Warranty & Support

For any warranty claims, technical support, or inquiries, please contact the manufacturer or authorized representative:

  • Manufacturer: Zhongshan Yehuo Lighting Co., Ltd.
  • Manufacturer Address: Zhongshan Ancient Town, Zhongshan City, Guangdong Province, Hengfu Road, Songwei High-end Lighting Digital Intelligentization Industrial, Building No. 3, 3rd Floor
  • Contact No: +8615361791976
  • Email: PalijAmarar@outlook.com
  • EU Authorized Representative: E-CrossStu GmbH
  • EU Representative Address: Mainzer Landstr 69, 60329 Frankfurt am Main, Hessen
  • EU Representative Email: E-crossstu@web.de

For a comprehensive guide and additional details, you may refer to the official user manual PDF: View User Manual PDF

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.