SWEVY SW6013

Contents

SWEVY SW6013 Digital Lux Meter User Manual

Model: SW6013

1. Introduction

This instruction manual provides the necessary information for safe and effective use of your SWEVY SW6013 Digital Lux Meter. To achieve maximum performance and ensure longevity of the product, please read this manual thoroughly before operation and keep it for future reference. Lux meters are widely used in various fields including science, industry, homes, offices, schools, businesses, road light construction, and laboratories.

2. Product Features

  • Measures the luminosity of any light source.
  • Converts between luminosity units (Lux/Fc).
  • Data Hold function with Maximum and Minimum value display.
  • Low power indication.
  • Automatic or manual power off function.
  • Integrated temperature measurement function.
  • 180° rotatable probe for flexible measurements.
  • High-quality silicon photonic sensor for large range, low power consumption, and fast response.

3. Device Overview

3.1. Physical Components

The SW6013 features a compact design with an orange and black casing, an LCD display, and a rotatable light intensity probe at the top.

SWEVY SW6013 Digital Lux Meter with labeled parts and dimensions
Figure 1: SW6013 Digital Lux Meter Labeled Diagram
This diagram illustrates the key physical components of the SW6013. The device measures approximately 167mm in height, 43mm in width, and 27mm in depth. Key parts include:
  • Light Intensity Probe: The sensor head at the top, which is 180° rotatable.
  • Main unit display screen: The LCD panel showing readings.
  • Power button: To turn the device on or off.
  • Unit switch key: To change between Lux and Fc, or °C and °F.
  • Backlight lamp button: To toggle the display backlight.
  • Lock Key/MAX/MIN (MODE button): To hold data, display maximum/minimum values, or configure auto power off.

3.2. LCD Screen Description

The LCD screen displays various information during operation:

  • Luminosity reading area: Displays the current light intensity.
  • Battery Power Icon: Indicates battery level.
  • Minimum Luminosity value (MIN): Shows the lowest recorded luminosity.
  • Maximum Luminosity value (MAX): Shows the highest recorded luminosity.
  • Temperature unit (°C/°F): Indicates the selected temperature unit.
  • Temperature Reading area: Displays the current ambient temperature.
  • Data Hold icon (HOLD): Appears when the data hold function is active.
  • Luminosity units (Lux/Fc): Indicates the selected luminosity unit.

4. Setup

4.1. Battery Installation

  1. Locate and open the battery door on the back of the unit.
  2. Insert three (3) AAA size batteries into the compartment, ensuring correct polarity (+/-).
  3. Close the battery door securely.

4.2. Battery Replacement

If the battery power indicator on the LCD becomes empty [_], replace the batteries with new ones to ensure accurate and reliable operation.

5. Operation Instructions

  1. Power On/Off:
    Depress the [Power] key to turn the unit on. To turn it off, depress the [Power] key again until the LCD screen is off.
  2. Luminosity Measurement:
    Once powered on, the unit will immediately begin measuring luminosity. Point the light intensity probe towards the light source. The probe can be rotated 180° for optimal positioning.
  3. Data Hold (Minimum and Maximum Value):
    In normal measurement mode, depress the [MODE] key. The display will sequentially freeze the data value, showing

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.