1. Introduction
Thank you for choosing the OffiGo Electric Standing Desk. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new height-adjustable desk. Designed for optimal ergonomics, this desk features a spacious 79-inch 3-piece desktop, electric height adjustment, and integrated power outlets to enhance your productivity and comfort.

OffiGo Electric Standing Desk with multiple monitors, showcasing its large workspace and ergonomic design.
2. Safety Information
- Ensure all components are securely fastened before use.
- Keep children and pets away from the desk during height adjustment.
- Do not overload the desk beyond its specified weight capacity.
- Avoid placing liquids directly on the control panel or power outlets.
- Disconnect power before cleaning or performing maintenance.
3. Package Contents
Please verify that all parts are present and undamaged. If any parts are missing or damaged, contact customer support immediately.
- 3-Piece Desktop Board
- Desk Legs (80x50mm dual beam structure)
- Electric Lifting Mechanism (motors and frame)
- Control Panel with Memory Presets
- Power Adapter and Cables
- Assembly Hardware (screws, tools, etc.)
- Instruction Manual
4. Assembly Instructions
Assembly is designed to be straightforward with clear instructions and labeled parts. It is recommended to have two people for assembly.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble Desk Frame: Attach the desk legs to the dual beam frame using the provided hardware. Ensure all connections are tight and secure.
- Attach Desktop Boards: Place the three desktop board pieces onto the assembled frame. Align them correctly and secure them using the designated screws.
- Install Control Panel: Mount the electric control panel to the underside of the desktop in an easily accessible location.
- Connect Wiring: Connect the motor cables and control panel cable to the main control box. Plug the power adapter into the control box and then into a wall outlet.
- Cable Management: Utilize the two integrated cable management holes to organize your power cords and peripheral cables for a tidy workspace.

Detailed view of the desk's solid and stable construction, showing dual beams and 80x50mm table legs for durability and smooth operation.
5. Operating Instructions
Height Adjustment
The OffiGo Electric Standing Desk allows for seamless height adjustments between sitting and standing positions.
- Raise Desk: Press and hold the 'Up' arrow button on the control panel.
- Lower Desk: Press and hold the 'Down' arrow button on the control panel.
Memory Presets
The desk features three programmable memory buttons (1, 2, 3) to save your preferred sitting and standing heights.
- Adjust the desk to your desired height using the 'Up' or 'Down' buttons.
- Press the 'M' button (or 'Set' button, if labeled differently) followed by one of the number buttons (1, 2, or 3). The display will show 'S-' followed by the number, indicating the height has been saved.
- To recall a saved height, simply press the corresponding number button (1, 2, or 3). The desk will automatically move to the saved position.

Close-up of the desk's 1.38-inch thick desktop and integrated control panel with memory presets.

Diagram illustrating the height adjustment range of the OffiGo Electric Standing Desk, from 29.1 inches (sitting) to 48 inches (standing).
6. Maintenance
- Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Cable Management: Periodically check and reorganize cables to prevent tangles and damage.
- Fastener Check: Every few months, inspect all screws and bolts to ensure they remain tight. Tighten if necessary.
- Motor Care: The electric motors are maintenance-free. Do not attempt to lubricate or disassemble them.
7. Troubleshooting
- Desk Not Moving: Check if the power cable is securely plugged into both the desk and the wall outlet. Ensure no obstructions are blocking the desk's movement.
- Uneven Movement: Perform a reset by lowering the desk to its lowest position and holding the 'Down' button for 5-10 seconds until it recalibrates.
- Error Codes: If an error code appears on the display, refer to the specific code in the full manual (if provided) or contact customer support. Often, unplugging the desk for 30 seconds and plugging it back in can resolve minor errors.
- Noise During Operation: A slight humming sound during adjustment is normal. Excessive or unusual noises may indicate an issue; discontinue use and contact support.
8. Specifications
| Feature | Specification |
|---|---|
| Desktop Material | 3-Piece Board |
| Desktop Thickness | 1.38 inches |
| Height Adjustment Range | 29.1 inches - 48 inches |
| Control Panel | Electric with 3 Memory Presets |
| Frame Material | Industrial-Grade Steel |
| Leg Dimensions | 80mm x 50mm |
| Color | Black |
| Installation Method | Assembly |
| Shape | L Shape (implied by large desk, but product prop says L Shape) |
| Package Weight | 30.0 kg |
| Package Dimensions (L x W x H) | 30 cm x 20 cm x 10 cm |

Overhead view of the extra-large desktop, highlighting its 79-inch length and 27.6-inch depth, suitable for multiple setups.
9. User Tips
- For optimal ergonomic benefits, alternate between sitting and standing throughout your workday.
- When setting memory presets, ensure your chair height is also adjusted to a comfortable position for sitting.
- Utilize the cable management features to keep your workspace clutter-free and prevent accidental disconnections.
10. Warranty and Support
OffiGo is committed to providing high-quality products and excellent after-sale support. For any questions, concerns, or assistance with your Electric Standing Desk, please contact our customer service team. Details for contacting support can typically be found on the seller's platform or original purchase documentation.