1. Product Introduction
The Elough FC68 Mobile Phone Cooler utilizes advanced semiconductor cooling technology combined with a silent fan to efficiently lower the back temperature of your smartphone. This design helps to stabilize device performance, reduce thermal throttling, and is ideal for extended use during gaming, live streaming, and long-term video playback.
2. Package Contents
Please verify that all items are present in your package:
- Cooler main unit x1
- Type-C cable x1
- User manual x1
- Magnetic clip accessories (may include adhesive magnetic ring for non-magnetic phones)
3. Specifications
| Feature | Detail |
|---|---|
| Product Name | Mobile Phone Semiconductor Cooler |
| Compatible Devices | Most smartphones (thickness ≤10mm, width 67-88mm) |
| Rated Voltage | DC 5V |
| Rated Power | 7W/10W (refer to product label) |
| Cooling Method | Semiconductor refrigeration |
| Heat Dissipation | Air cooling + cold-conducting plate |
| Power Interface | Type-C |
| Working Noise | ≤30dB |
| Package Dimensions (L x W x H) | 13 cm x 11 cm x 5 cm |
| Package Weight | 0.115 kg |
4. Installation
- Attach the Cooler: Pull open the clamp mechanism. Position the cooler on the middle of your phone's back, ideally below the camera module.
- Secure Firmly: Clamp the cooler firmly onto your phone. Ensure the cooling surface makes tight contact with the phone's back for optimal heat transfer.
- Magnetic Attachment (Optional): For phones with magnetic capabilities, the cooler can attach directly. For other phones, use the provided adhesive magnetic ring by sticking it to the back of your phone, then attach the cooler magnetically.
5. Operating Instructions
- Power On: Connect the cooler to a USB power source (e.g., charger, power bank, or USB port) using the provided Type-C cable. The cooler will automatically start cooling and the fan will begin to operate.
- Adjust Fan Speed/Power: Lightly press the 'Gear button' on the side of the cooler to cycle through the three available speed/power modes. This adjusts the fan speed, cooling power, and temperature, adapting to various usage scenarios.
- Control RGB Lighting: Press and hold the 'Gear button' to turn the RGB lighting effects on or off.
- Continuous Use: The cooler starts cooling immediately upon power-on. For optimal lifespan, continuous use is recommended for no more than 4 hours at a time.
- Removal: To remove the cooler, first unplug the power cable. Wait approximately 10 seconds, then gently open the clamp and detach it from your phone.
6. Cleaning & Maintenance
- Always unplug the power cable and allow the cooler to cool down completely before cleaning.
- Use a dry cloth or a soft brush to gently clean any dust from the fan blades and vents.
- Do not wash the cooler with water, alcohol, or any other chemical cleaning agents.
7. Troubleshooting
- Not cooling, only fan working:
- Check that the power supply meets the minimum requirement (5V/2A or above).
- Ensure the cooler is reattached tightly to the phone, making good contact with the cooling surface.
- Increased noise:
- The fan may have accumulated dust or foreign objects. Gently clean the fan and vents as described in the Maintenance section.
- Weak cooling performance:
- High ambient room temperature can affect cooling efficiency.
- Ensure the cooler is reattached firmly to the phone, making tight contact.
- Note: Ice will not form if the ambient temperature is above 25°C, even with a 5V 3A power supply.
8. User Tips
- The cooler is highly effective and can achieve significant cooling, often forming frost, in less than 10 seconds under ideal conditions.
- This device is not rechargeable and requires continuous connection to a power source (USB-C cable) to function.
- For optimal icing and cooling performance, ensure the ambient room temperature is 25°C or below, and use a power supply of at least 5V 3A.
9. Important Safety & Notes
- This product is designed exclusively for mobile phones. Do NOT use it on tablets, laptops, or other oversized devices.
- Minor condensation may appear on the cooling surface in low ambient temperatures. This is normal. Always dry the phone back before attaching the cooler.
- Do not immerse the device in water, drop it, disassemble it, or block its air inlets/outlets.
- If children operate the device, ensure it is done under adult supervision.
- Immediately stop using the device if you observe abnormal noise, no cooling, or a burning smell.
- Before first use, please remove any protective film from the cooling surface.
10. Warranty & Support
The Elough FC68 Mobile Phone Cooler comes with a 1-year warranty covering non-human damage from the date of purchase.
The warranty does not cover damage caused by:
- Unauthorized modification or disassembly of the product.
- Water damage or exposure to liquids.
- Dropping or physical impact.
- Improper use or operation not in accordance with this manual.
For further assistance or to view a detailed user manual, please refer to the official PDF document available here.