Road Top 12.3 Wireless CarPlay Multimedia Screen

Contents

RoadTop 12.3-inch Wireless CarPlay Multimedia Screen User Manual

Model: 12.3 Wireless CarPlay Multimedia Screen

Brand: Road Top

1. Introduction

This manual provides detailed instructions for the installation, setup, and operation of your RoadTop 12.3-inch Wireless CarPlay Multimedia Screen. This device is designed to enhance your driving experience by integrating modern smartphone functionalities like CarPlay and Android Auto into your BMW vehicle's existing system.

The screen is compatible with BMW Series 1, 2, 3, and 4 (F20, F21, F22, F45, F30, F31, F32, F33, F45) NBT and EVO systems from 2012-2019.

RoadTop 12.3 inch Wireless CarPlay Multimedia Screen for BMW
RoadTop 12.3-inch Wireless CarPlay Multimedia Screen for BMW Series 1/2/3/4.
Compatible Model List for BMW NBT and EVO systems
Compatible Model List for BMW NBT and EVO systems.

Compatible Model List:

SYSTEM MODEL YEAR
NBT 1 2 Series F20 F21 F22 F23 2012-2016
NBT 3 4 Series F30 F31 F32 F33 F34 F36 2012-2016
EVO 1 2 Series F20 F21 F22 F23 2016-2019
EVO 3 4 Series F30 F31 F32 F33 F34 F36 2016-2019

2. Safety Information

Please read all instructions carefully before installation and use. Improper installation or use can lead to product damage, vehicle damage, or personal injury. Always ensure the vehicle's engine is switched off before installing any cables.

  • Always follow local traffic laws and regulations.
  • Do not operate the device in a way that distracts you from driving.
  • Ensure all connections are secure to prevent short circuits or malfunctions.
  • If you are unsure about any installation step, seek professional assistance.

3. Product Overview

3.1 Product List

The standard product package includes the main screen, a bracket (which may vary by model), a power cable, a USB cable, and an AUX cable. Please verify all components are present upon unboxing.

Product Size and Accessories List
Included accessories: Screen Front, Screen Back, Power cable, USB cable. Note: Back bracket differs based on model.

3.2 Ports Introduction

Reminder: Please make sure to switch off the engine before installing any cables.

Main Screen Ports

Main screen ports diagram
Main screen rear view showing LVDS cable, USB cable, and Power cable connections.

Power Cable

Power cable connections diagram
Power cable connections: Connects to CD host and screen. Includes Audio out, 5V-out, ACC out, Rear camera, 360 DET, Rear camera PWR, and Video in.

USB Cable

USB cable diagram
USB cable with two ports: USB 2 (for USB display) and USB 1 (for wired CarPlay). Connects to the screen via BM168 connector.

4. Installation Guide

4.1 Car Dashboard Removal

We provide car dashboard removal videos for different kinds of car models. Please scan the QR codes below to view the guidance videos for your reference.

For BMW Series 1/2/3/4 X1/X5/X6 NBT

QR code for BMW Series 1/2/3/4 NBT removal

For BMW Series 3/5/7 CIC/NBT

QR code for BMW Series 3/5/7 CIC/NBT removal

For BMW X3/X4 CIC/NBT, X1/X5/X6 CIC

QR code for BMW X3/X4 CIC/NBT, X1/X5/X6 CIC removal

Note: The QR codes provided are placeholders. Please refer to the actual product packaging or seller's website for functional QR codes.

4.2 Cables Connection Chart

For cars with original i-drive

If your car already has an internal i-drive, there is no need to add an additional i-drive. Also, no need to connect any cable for the original i-drive.

Wiring diagram for cars with original i-drive
Wiring diagram for cars with original i-drive. Connections include original power cable, CD host, LVDS cable, Camera & video, USB 2 (normal use), USB 1 (wired CarPlay), and car AUX port.

For cars without original i-drive

If your car doesn't have an i-drive, it is suggested to install an external i-drive. The snapshot below illustrates the product cables connection solution.

Wiring diagram for cars without original i-drive
Wiring diagram for cars without original i-drive. Includes connections for original power cable, CD host, LVDS cable, additional i-drive, USB 1 (wired CarPlay), USB 2 (normal use), and car AUX port.

5. Initial Setup

5.1 Resolution Setup

Before using the OEM system, please complete the resolution setting first.

Setup Steps:

  1. Navigate to Setup > Car settings > Original Car's Screen Resolution.
  2. Select the correct resolution that matches your car's original screen resolution.
Resolution setup menu screenshot
Screenshot of the resolution settings menu, showing options like BMW 400x240, 640x240, 800x480, and 1280x480.

Reminder: Please make sure to restart the car after changing the resolution.

5.2 System Switching

To switch between the new multimedia system and your car's original system:

  1. From the main menu, click the "Original Car" logo to enter the original system.
  2. You can touch anywhere on the screen to return to the Linux system.
System switching menu screenshot
Screenshot of the system switching menu, showing icons for Original car interface, CarPlay, Auto, and Bluetooth.

5.3 Sound Setup

There are two methods for sound transmission: AUX cable transmission and Bluetooth transmission.

AUX Cable Transmission

There is no need to connect the EXT-AUX cable to your car's AUX port, unless your car is a BMW 3/4 series or a 1/2 series.

AUX Setup Steps:

  1. Click the "Original Car" logo in the main menu to enter the original system.
  2. Enter into the "CD/Multimedia" or "Multimedia" menu, then click "External devices".
  3. Select "AUX front" as the sound transmission method.
  4. Keep the original system in "AUX front" status, then touch the screen to return to the Linux interface. AUX setting is now complete.
AUX setup menu screenshot
Screenshot showing the selection of "AUX front" in the external devices menu for sound transmission.

Bluetooth Transmission (for cars with Bluetooth function)

  1. First, connect your phone and car via Bluetooth.
  2. Turn on the "Use Car's BT Channel" switch to activate the Bluetooth function.
  3. Set Bluetooth as the sound transmission method.
Bluetooth setup menu screenshot
Screenshot of Bluetooth settings, highlighting the "Use Car's BT Channel" option.

5.4 Camera and DVR Setup

OEM Camera

If your camera is an OEM camera, please select "Original camera" in the settings.

Setup Path: Setup > Car Settings > Reversing Settings > Camera Type > Original camera.

Aftermarket Camera

For aftermarket cameras, select "Aftermarket camera" in the settings.

Setup Path: Setup > Car Settings > Reversing Settings > Camera Type > Aftermarket camera.

Camera Cables Connection:

For the original camera, no additional cable connection is needed. For aftermarket cameras, follow the samples below:

Rear-Camera Cable connection for AT (Automatic Transmission): "Rear-Camera" + "Rear-Camera-PWR"

Rear camera wiring for AT
Rear camera wiring diagram for Automatic Transmission, showing connection to Rear Camera PWR.

Rear-Camera Cable connection for MT (Manual Transmission): "Rear-Camera" + "360 DET"

Rear camera wiring for MT
Rear camera wiring diagram for Manual Transmission, showing connection to 360-DET, GND 12V-, and reverse lamp 12V+.

Front Camera/DVR Cables Connection:

The connection method for both front camera and DVR is the same. The product currently only supports DVR via the RCA port. Cable connection ports: "Video-Input" + "Rear-Camera-PWR".

360 Camera Cables Connection:

The power cable may not have enough video input ports for 360 cameras. You may need to add an external decoder to integrate all camera video feeds, then connect the decoder to the video input port of the power cable.

5.5 Front-view Time Setup

To activate the front camera, you must first set the "Front-view Time".

Setup Steps:

  1. Shift to reverse gear.
  2. Change to driving gear.
  3. The screen will enter the "Reversing Settings" interface.
  4. Set the "Front-view Time" here. It is recommended to set it between "0-20" seconds.
Front-view Time setup menu screenshot
Screenshot of the Front-view Time setting within Reversing Settings.

6. Operating Instructions

The multimedia screen supports various connectivity options to integrate your smartphone experience into your car.

Wireless/Wired CarPlay, Android Auto, AirPlay, Autolink demonstration
Demonstration of Wireless/Wired CarPlay, Wireless/Wired Android Auto, Wireless/Wired AirPlay, and Wireless/Wired Autolink functionalities.

6.1 Wireless CarPlay / Android Auto

Before setting up CarPlay, disconnect any existing Bluetooth connection between your phone and the car.

Connection Steps:

  1. Turn on your mobile phone's "Wi-Fi" switch.
  2. Turn on "Bluetooth" as well.
  3. Search for the product's Bluetooth device. The name of the Bluetooth device is "CARKIT".
  4. Pair the Bluetooth.
  5. Allow the sync.
  6. Click "Allow" to use the CarPlay function.
Wireless CarPlay/Android Auto connection steps screenshots
Screenshots illustrating the steps for connecting wirelessly to CarPlay/Android Auto, including Bluetooth pairing and allowing sync.

The connection process for wireless Android Auto is the same as for CarPlay. Follow these steps to connect your Android device.

6.2 Wired CarPlay / Android Auto

  1. Connect your phone to the product using a USB cable.
  2. The wired CarPlay / Android Auto function will be available.

6.3 Air-Play

Setup Steps:

  1. Navigate to Setup > Smart Phone > Smart Phone List.
  2. Turn off "CarPlay" and turn on "Air-Play".
  3. Turn on the Wi-Fi switch of the screen and connect to your iPhone's personal Hotspot.
  4. Open the shortcut menu bar of your iPhone, select "screen mirroring" and turn it on. You can now use the AirPlay function.

Setup Steps:

  1. Download the "Auto-link Pro" app on your Android phone. Use your phone browser to scan the QR code below to download the app.
  2. In the main interface, click Setup > Smart Phone > Smart Phone List > Turn on Auto-link.
  3. Open the "Autolink Pro" app.
  4. Connect to "CAR-XXXX".
  5. Allow "Autolink Pro" to use the mirror link function.
QR code for Auto-link Pro app
QR code to download the "Auto-link Pro" app.

6.5 Product Demonstration Video

Watch this video for a visual demonstration of the product's features and functionalities, including CarPlay, navigation, music playback, voice control, switching to the original system, and camera views.

Product demonstration video showing CarPlay, navigation, music, voice control, original system switch, rear camera, and front camera.

7. Specifications

Feature Specification
Operating System Linux
Built-in Screen Yes
Display Size 10.25, 12.3 inches
Resolution 1920*720
Din One Din
Voltage 12 V
Item Weight 2kg
Item Size 39.5*18.4*17.3 cm
Output Type Colored
Digital Media Format CD
OSD Language Chinese (Simplified), Chinese (Traditional), Polish, German, Russian, French, Japanese, Turkish, Spanish, Italian, English
Origin Mainland China
Certification CE
Package Length 39 cm
Package Width 18 cm
Package Height 17 cm
Processing Time 7 days

8. Troubleshooting (FAQ)

8.1 Screen display wrong or showing not correctly

Reason: You may have selected a resolution larger than your car's original screen resolution (e.g., your original screen is 800*480, but you set the new screen resolution to 1280*480).

Solution: Select the correct resolution as per your car's original screen resolution, and then restart the screen or the car.

Incorrect screen display due to wrong resolution
Example of incorrect screen display due to mismatched resolution settings.

8.2 Half screen display wrong

Reason: You may have selected a resolution smaller than your car's original screen resolution (e.g., your original screen is 800*480, but you set the new screen resolution to 480*240).

Solution: Select the correct resolution as per your car's original screen resolution, and then restart the screen or the car.

8.3 Does the product support the original microphone of the car?

The product has a built-in microphone and does not support the car's original microphone.

8.4 Which steering wheel control buttons work?

The product supports the right-side buttons of the steering wheel control. The left-side buttons are not supported.

Steering wheel buttons support diagram
Diagram indicating support for right-side steering wheel buttons and no support for left-side buttons.

9. User Tips

  • AUX Port Requirement: If your car does not have an AUX port, you will need to enable or create one to get sound from CarPlay/Android Auto through the car's speakers. Otherwise, you will have to rely on the car's Bluetooth for audio.
  • System Compatibility: Always confirm your car's specific system (NBT or EVO) and the LVDS connector type before purchasing and installing to ensure compatibility.
  • Wireless Connection: For seamless wireless CarPlay/Android Auto, ensure your phone's Wi-Fi and Bluetooth are both enabled, and disconnect any prior Bluetooth connections between your phone and the car before initiating the connection with the screen.
  • Resolution Settings: Pay close attention to setting the correct screen resolution to match your original car display to avoid display issues like black bars or distorted images. Restart the car after any resolution changes.
  • Steering Wheel Controls: Be aware that only the right-side steering wheel control buttons are supported by this multimedia screen.

10. Warranty and Support

This product comes with a 1-year warranty.

Contact Us

Please contact us via the purchase platform if you need any help. When contacting us, please provide the following information:

  1. Your order ID.
  2. Your car model and year.
  3. A detailed description of the problems you encountered. Videos or pictures about the problems would be appreciated, as they will help us find a solution more quickly.
Help Center image
Image representing the Help Center for support inquiries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.