Laser Mini Portable Laser Level

Contents

Mini Portable Laser Level User Manual

Model: Mini Portable Laser Level

Your guide to accurate and efficient leveling.

1. Product Overview

This multi-functional linear laser level is designed for projecting accurate horizontal and vertical laser lines. It features built-in dual spirit levels to ensure measurement precision and stability. The device supports thumbtack fixation for stable installation and is ideal for baseline positioning in various applications such as decoration, installation, woodworking, stair risers, shelving, molding, and tile laying.

Multi-function laser linear instrument, convenient to carry, precision accurate, double level bubble.
Figure 1: Multi-functional Laser Level with dual spirit levels.

Key Features:

  • Portable and Compact: Mini size for easy carrying and on-the-go use.
  • Versatile Use: Projects straight laser lines for both vertical and horizontal measurements.
  • Accurate Measurements: Laser line projection ensures precise results.
  • Easy to Use: Simple design suitable for professionals and DIY enthusiasts.
  • Dual Bubble Levels: For accurate horizontal or vertical alignment.
  • Retractable Push Rods: Keep the device stable during operation.

2. Package Contents

The package typically includes:

  • 1 x Mini Portable Laser Level

Note: 2x AAA batteries are NOT included and must be purchased separately.

3. Technical Specifications

Parameter Value
Laser Type Class 2 Red Laser
Laser Wavelength 635nm~670nm
Working Power Supply 3V (2×AAA Batteries)
Working Temperature 0°C ~ 40°C
Storage Temperature -10°C ~ 50°C
Laser Line Accuracy ±1mm/5m
Product Dimensions 61mm (Height) x 122mm (Length) x 40mm (Width)
Weight 100g
Product dimensions: 61mm height, 122mm length, 40mm width.
Figure 2: Product dimensions.

4. Safety Information

⚠ WARNING: Laser Radiation

The laser beam emitted by this product is a Class 2 laser. Looking directly at the laser beam may cause permanent damage to human eyes. Protective glasses must be worn during use, and it is strictly prohibited to point the laser beam at others or your own eyes.

Usage Restrictions:

  • Prohibited to use in flammable and explosive environments, strong electromagnetic interference areas, or outdoor rainy days.
  • Prohibited to look directly at the laser beam to avoid damage to human eyes.
  • Prohibited to use beyond the device's specified working temperature range (0°C ~ 40°C).
  • Children and personnel without operating experience are prohibited from using this product. Read this manual carefully before use and strictly follow the operating steps.
  • Stop using the device immediately if it malfunctions. Contact professional personnel for maintenance. Disassembling or repairing by yourself is prohibited to avoid electric shock or laser leakage risks.

5. Setup Instructions

5.1. Battery Installation

  1. Open the battery compartment cover located on the back of the device.
  2. Insert two (2) AAA batteries, ensuring correct polarity (+/-).
  3. Close the battery compartment cover securely.
Battery compartment for 2x AAA batteries.
Figure 3: Battery installation (AAA batteries not included).

5.2. Component Identification

Diagram showing laser mouth, horizontal bubble, power switch, fixed hole, and H nail.
Figure 4: Labeled components of the laser level.
  • Laser Mouth: Emits the laser line.
  • Level of Bubble: Dual spirit levels for horizontal and vertical alignment.
  • Power Switch (ON/OFF): Activates and deactivates the laser.
  • Fixed Hole / H Nail: Used for mounting the device with thumbtacks or a supporting bracket.

5.3. Fixing the Device

Fix the device on the wall or ground using the integrated thumbtacks or a compatible supporting bracket to ensure stable installation. Ensure the surface is flat and secure.

Laser level mounted on a wall using thumbtacks, projecting a red laser line.
Figure 5: Example of wall mounting using thumbtacks.

5.4. Horizontal Calibration

Adjust the position of the device until the bubbles in both the horizontal and vertical spirit levels are centered. This ensures accurate horizontal and vertical alignment for your measurements.

Close-up of the laser level's dual spirit levels, highlighting their clarity for accurate measurements.
Figure 6: High definition horizontal and vertical bubbles for precise calibration.

6. Operating Instructions

  1. Turn on the laser: Press the power switch on the body of the device to start the output of the linear laser line.
  2. Positioning and line marking: Once the laser line is projected, use it to mark your baseline or perform construction positioning. The device projects a straight line onto any surface, allowing you to set the line to any angle.
  3. Laser level projecting a straight line onto a surface, demonstrating its ability to set the line to any angle.
    Figure 7: Projecting a straight laser line.
    Laser level in use for fine work, showing a laser line projected next to a ruler and pencil.
    Figure 8: Ideal for precise alignment in various tasks.

    Warm Notice: This machine can only make one straight line of laser light. If you require a cross line, it is suggested to use two devices.

  4. Laser Line Visibility: The effective distance for holding the device on a wall is about 5 meters. When used on the ground, the laser line may become less obvious with increasing distance.
  5. Comparison of laser line visibility at 1.5m and 5m distances.
    Figure 9: Laser line visibility at different distances.
  6. Turn off the device: After use, turn off the laser switch, remove the device from its fixed position, and store it properly.

7. Maintenance

  • Regularly clean the laser window and spirit levels to prevent dust from affecting accuracy.
  • If the device will not be used for a long time, remove the batteries to prevent liquid leakage and potential damage.
  • Store the device in a dry, ventilated environment, free from corrosive gases, and protect it from severe vibration.

8. Troubleshooting (FAQs)

Q: The laser line is inaccurate.
A: Check if the dual spirit levels are calibrated (bubbles centered). Ensure the laser window is clean and the device is fixed stably on a flat surface.
Q: The laser does not emit light.
A: Verify that the batteries are installed correctly and are fully charged. Replace with new batteries if necessary. Ensure the power switch is pressed properly to turn on the device.

9. User Tips

  • For best visibility, use the laser level in dimly lit environments.
  • Always ensure the device is securely mounted to prevent movement during use, which can affect accuracy.
  • When working on projects requiring both horizontal and vertical lines simultaneously (a cross line), consider using two laser levels for optimal results, as this model projects a single line.

10. Applicable Regulations and Harmonized Standards

This product complies with the following regulations and standards:

  • GB 7247.1-2012 "Safety of Laser Products - Part 1: Equipment Classification and Requirements"
  • GB 4943.1-2011 "Information Technology Equipment - Safety - Part 1: General Requirements"
  • EN 60825-1:2014 "Laser products - Safety - Part 1: Equipment classification and requirements"

Disclaimer

This product is a laser positioning tool. The manufacturer shall not be liable for any losses caused by failure to use it in accordance with this manual, illegal operation, self-disassembly/modification, or factors unrelated to the product itself.

11. Warranty and Support

For detailed warranty information and customer support, please refer to the official user manual PDF provided by the seller. You can typically find this document on the product's purchase page or by contacting the seller directly.

A digital version of the user manual is available at: User Manual (PDF)

© 2024 Laser. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.