1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Yoosee WiFi IP Camera. Designed for outdoor use, this camera features a 15MP 8K resolution, triple lenses, triple screens, smart night vision, two-way audio, and is waterproof with Onvif support. Please read this manual carefully before use and retain it for future reference.
2. Safety Information
- Always disconnect the power supply before inserting or removing the SD card to prevent damage.
- Avoid installing the product in environments with high temperatures, high humidity, excessive dust, or smoke, as this may cause equipment damage.
- Ensure the camera is connected to a stable power source as specified.
- Keep the device and its components out of reach of children.
3. Product Overview
The Yoosee WiFi IP Camera features a unique triple-lens design for comprehensive coverage. It includes:
- Triple Lenses: For wide-angle and detailed views.
- PTZ Rotation: Pan 0°-360°, Tilt -10°-180° for flexible viewing.
- Smart Night Vision: Supports Normalcy, White Light, and Infrared modes for clear visibility in low light.
- Two-Way Audio: Built-in microphone and speaker for communication.
- AI Functions: Smart Tracking for automatic motion detection and follow-up.
- Connectivity: WiFi (2.4GHz) and Onvif support for integration with NVR systems.
- Storage: Supports SD Card (up to 256GB) and Cloud Storage.
- Waterproof/Weatherproof: IP66 rated for outdoor durability.
4. Setup Guide
4.1. Downloading the Yoosee App
The Yoosee app is essential for controlling and monitoring your camera. You can download it using one of the following methods:
- Option 1: Search for "Yoosee" in your mobile App store (e.g., Apple App Store or Google Play Store).
- Option 2: Scan the QR code below with your mobile device to directly download the "Yoosee" mobile APP.
4.2. Account Registration
New users must register an account to use the app. Follow these steps:
- Click "Register" in the Yoosee app.
- Select your "Registration Location".
- Enter your mobile phone number or email address.
- Click "Next" and follow the on-screen prompts to complete the registration and log in.
Note: In some countries/regions, mobile phone number registration may not be supported; please use your email address. Ensure you select the correct region for data service compatibility.
4.3. Switching on the Device
Before connecting the camera to the app, power it on:
- Connect the camera to a power source.
- Wait approximately 30 seconds. The camera should emit a voice prompt: "Please scan the QR code to add the device" and a continuous "du du" sound.
- If you do not hear the voice prompt, press and hold the RESET button on the camera until it beeps "di", then wait for the device to reboot.
4.4. Adding the Camera
Once the camera is powered on and ready:
- Open the Yoosee APP and click the "+" icon in the upper right corner.
- Select "Prepare Camera".
- Scan the QR code located on the camera.
- Follow the prompts in the app to complete the camera addition process.
Important: When adding a camera, ensure that positioning and Bluetooth permissions are enabled for the Yoosee APP on your mobile device. The camera supports 2.4GHz Wi-Fi only; ensure your mobile phone is connected to a 2.4GHz network. Keep the camera and router within 10 meters. Wi-Fi passwords are case-sensitive.
4.5. Installation
The camera offers versatile installation options:
- Ceiling
- Embedded
- Side
- Normal (desktop)
- Wall Mounted
- Stick
- Vertical Pole Mount
Choose the installation method that best suits your monitoring needs. Ensure the camera is securely mounted and has a clear line of sight to the desired area.
5. Operating Instructions
5.1. PTZ Rotation and Panoramic View
The camera supports 355° pan and 90° tilt rotation, allowing you to adjust the viewing angle remotely via the Yoosee app to achieve a panoramic view of your surroundings.
5.2. Smart Night Vision
The camera is equipped with infrared and white dual-light LEDs, providing clear images even at night. It supports three night vision modes:
- Normalcy: Standard daytime view.
- White Light: Activates white LEDs for full-color night vision.
- Infrared: Uses infrared LEDs for black and white night vision.
5.3. Two-Way Audio and Multi-User Sharing
The built-in microphone and speaker enable real-time two-way communication through the camera. You can also share camera access with multiple users, allowing family members or colleagues to monitor simultaneously.
5.4. Cloud and SD Card Storage
The camera supports both cloud storage and local storage via a TF card (up to 256GB). It uses loop recording, automatically overwriting the oldest footage when the SD card is full.
5.5. Motion Detection and AI Functions
The camera features motion detection and smart tracking AI functions, which can alert you to activity and follow moving objects within its field of view.
5.6. Waterproof and Sunproof Design
The camera is designed to withstand various weather conditions, ensuring continuous operation rain or shine.
6. Maintenance
- Regularly check for and install updates for the Yoosee app and camera firmware to ensure optimal performance and security.
- Clean the camera lenses periodically with a soft, dry cloth to maintain clear image quality.
- Ensure the power connection is secure and free from damage.
7. Troubleshooting (FAQs)
Q: The camera can't connect to Wi-Fi?
- Verify that the entered Wi-Fi password is correct and case-sensitive.
- Reboot both your router and the camera, then attempt to re-add the camera.
- Ensure your camera supports 5G Wi-Fi if you are trying to connect to a 5G network. Otherwise, ensure your mobile phone is connected to a 2.4GHz Wi-Fi network.
- Check your Wi-Fi router settings. Disable options like AP isolation or anti-dawdling that might restrict Wi-Fi access.
- On your mobile phone, grant positioning permission to the Yoosee app to allow it to access the Wi-Fi list.
Q: What should I do if the camera is offline in the camera list?
- Check if the network connected to the camera is functioning normally.
- If an SD card is installed, remove it, then reboot the camera and router to see if the camera comes back online.
- If the issue persists, perform a factory reset on the camera (long press the "RESET" button until it beeps), then re-add it to the app.
- Ensure both the Yoosee app and camera firmware are updated to their latest versions.
Q: What if the camera is offline after I change the router or Wi-Fi password?
- The camera stores the original Wi-Fi password. When the password changes, it will not be able to connect. You must reset the camera (long press the "RESET" button until it beeps) and then re-add it following the app prompts.
Q: What should I do if I can't watch the video on card playback?
- Ensure the video recording switch is enabled in the app settings.
- If enabled but still no video, go to [Settings] -> [Video Settings] in the app and format the SD card.
- If the problem persists after formatting, it is recommended to replace the SD card with a new one.
General Cautions:
- The camera supports up to a 256GB SD card with FAT32/exFAT format.
- The device uses loop recording; when the SD card is full, the camera automatically overwrites the earliest video.
- Yoosee App and device firmware will be updated periodically. Please upgrade online when prompted.
- For monitoring on a Windows computer, download and install the Yoosee PC client from www.yoosee.co.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Cugo |
| Model | 15MP 8K Triple Lenses Triple Screens Security Video Monitor |
| Megapixels | 15mp |
| High Definition | 5.0 Megapixels (Note: Product title indicates 15MP 8K) |
| Lens Quantity | Tri-Lens |
| Lens (mm) | 3.6mm |
| Zoom Type | Digital zoom |
| Zoom | 10X |
| Viewing Angle | 360° |
| Movement Range (Pan) | 0°-360° |
| Movement Range (Tilt) | -10°-180° |
| Connectivity | WIFI(2.4GHz) |
| AI Functions | Smart Tracking |
| Color Night Vision | Yes |
| IR Distance (m) | 15M |
| Audio Output | Two Way Audio |
| Video Compression Format | H.265 |
| TF Card Support | 256g, 128G, 64G, 32G TF Card |
| Internal Storage | 256GB |
| Power Mode | Mains Electricity |
| Power Supply | Normal |
| Operating Temperature | -10°-60° |
| IP Rating | IP66 |
| Special Features | Waterproof / Weatherproof |
| Installation | Ceiling, Embedded, Side, Normal, Wall Mounted, Stick, Vertical Pole Mount |
| Supported Mobile Systems | Symbian, Windows Mobile, Android, iOS |
| Supported Operating Systems | Windows 98, Windows XP, Windows Vista, Windows 7, macOS, Windows 8, Windows 10, Windows 2000, Windows 2008, Windows 2003 |
| Sensor | CMOS |
| Alarm Type | telefon Alarm, Local Alarm, FTP Photo, Email Photo |
| Certification | CE |
| Origin | Mainland China |
9. User Tips
- NVR Compatibility: This camera supports Onvif, allowing it to connect and integrate with Network Video Recorders (NVRs) for centralized recording and management.
- Easy Setup: Many users find the setup process straightforward, especially when following the app's instructions carefully.
- Wi-Fi Band: Remember that the camera primarily uses 2.4GHz Wi-Fi. Ensure your router is configured correctly and your phone is connected to the 2.4GHz band during setup.
- Motion Detection Sensitivity: If motion detection is not working as expected or is too sensitive, check the app settings for adjustments. Fine-tuning the detection zones and sensitivity levels can improve performance.
- Triple Screen View: The triple-lens design allows for a unique multi-view display, which can be particularly useful for monitoring larger areas or multiple angles simultaneously.
10. Warranty and Support
For detailed warranty information and further assistance, please refer to the official user manual PDF available at Yoosee WiFi Smart Camera User Manual (PDF). You can also contact technical support at support@gwall.cc.