VICTOR 816 Digital Anemometer User Manual

1. Introduction

The VICTOR 816 Digital Anemometer is a handheld device designed for accurately measuring wind speed, wind temperature, and wind chill. It features a clear LCD display with backlight, multiple unit options, and functions for maximum, minimum, and average readings. This instrument is suitable for a wide range of applications, from recreational activities like kite flying and drone operation to professional uses such as meteorology, nautical surveys, HVAC system measurements, and fan manufacturing.

2. Safety Information

• Read this manual thoroughly before use to ensure proper operation and prevent damage.
• Do not attempt to disassemble or modify the device, as this may void the warranty and cause injury.
• Keep the device away from water, high temperatures, and strong magnetic fields.
• Remove the battery if the device will not be used for an extended period to prevent battery leakage.
• This product is not intended for special purposes where precise measurements are critical for safety or legal compliance, unless explicitly stated.

3. Package Contents

Please check the package for the following items:

• 1 x VICTOR 816 Anemometer
• 1 x User Manual
• 1 x Certificate
• 1 x Portable Strap
• 1 x CR2032 3.0V Battery (may not be included in all packages)

4. Product Overview

Familiarize yourself with the components and display elements of your anemometer:

5. Setup

5.1 Battery Installation

1. Remove the yellow protective case if present.
2. Locate the battery compartment cover on the back of the device.
3. Rotate the battery cover using a screwdriver or a coin.
4. Insert one CR2032 3.0V button cell battery, ensuring correct polarity (+/-).
5. Replace the battery cover and secure it.

6. Operating Instructions

6.1 Power On/Off

• Power On: Press and hold the "MODE" button. The LCD will display all segments for 1 second, then show the current wind speed and temperature. The backlight will turn on automatically.
• Power Off: Press and hold the "MODE" button to turn off the device. The device will also automatically power off after 14 minutes of inactivity.

6.2 Setting Wind Speed Units

• After powering on, press the "UNIT" button to cycle through the five available wind speed units: m/s (meters/second), km/h (kilometers/hour), ft/min (feet/minute), knots (nautical miles/hour), and mph (miles/hour).

6.3 Setting Temperature Units

• Press the "°C/°F" button to switch between Celsius (°C) and Fahrenheit (°F) temperature units.

6.4 Data Hold Function

• While measuring, press the "HOLD" button to freeze the current reading on the display.
• Press "HOLD" again to release the hold and resume normal measurement.

6.5 LCD Backlight Control

• The backlight is enabled by default when the device is powered on.
• Press and hold the "HOLD/BL" button to turn off the LCD backlight.
• Press and hold the "HOLD/BL" button again to turn the backlight back on.

6.6 Maximum, Minimum, and Average Wind Speed Measurement

• After powering on, when the wind impeller is rotating, the screen defaults to displaying the current wind speed.
• Press the "SET" button (labeled as MAX/MIN/AVG) to cycle through maximum (MAX), minimum (MIN), and average (AVG) wind speed readings.

7. Maintenance

• Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ensure the wind impeller is free from dust and debris for accurate readings.
• Store the anemometer in a cool, dry place when not in use.
• If the device will not be used for an extended period, remove the CR2032 battery to prevent potential damage from battery leakage.

8. Troubleshooting

8.1 Low Battery Indication

• If the battery symbol () appears on the display, the battery level is low. Replace the CR2032 battery promptly to ensure accurate measurements.

8.2 "WIND CHILL" Prompt

• When the ambient temperature drops below 0°C (32°F), the display will show a "WIND CHILL" prompt, indicating the perceived temperature due to wind. This is a normal function of the device.

8.3 Inaccurate Readings

• Ensure the wind impeller is rotating freely and is not obstructed by any foreign objects.
• Check the battery level and replace if low.
• Ensure the thermal probe is clean and unobstructed for accurate temperature readings.

9. Specifications

9.1 Wind Speed Measurement

9.2 Air Temperature Measurement

9.3 Other Specifications

10. User Tips

• For best accuracy, hold the anemometer steady and ensure the wind flow is unobstructed to the impeller.
• When measuring wind speed for activities like kite flying or drones, consider taking multiple readings and using the average function for a more stable result.
• The compact size makes it easy to carry; utilize the portable strap to prevent accidental drops.

11. Warranty & Support

This manual is subject to change without prior notice. While the content of this manual is believed to be accurate, if you discover any errors or omissions, please contact the manufacturer. The manufacturer is not liable for any accidents or damages resulting from incorrect user operation.

The functions described in this manual do not imply that the product is suitable for any specific or special purpose beyond its stated capabilities.

Contact Information: