NITECORE EDC35

Contents

Nitecore EDC35 Tactical EDC Flashlight User Manual

Model: EDC35

1. Introduction

Thank you for choosing the Nitecore EDC35 Tactical EDC Flashlight. This manual provides essential information for the safe and effective use of your new flashlight. Please read it carefully before operation and retain it for future reference.

The Nitecore EDC35 is a high-performance tactical EDC flashlight designed for various outdoor activities and self-defense. It features a powerful 9-core UHi 40 MAX LED, delivering up to 5,000 lumens of output and a beam distance of 550 meters. With its robust construction, advanced features, and user-friendly interface, the EDC35 is an indispensable tool for any adventure.

Video: Nitecore EDC35 product features and usage demonstration.

2. Package Contents

Please check the package to ensure all items are present:

  • EDC35 Flashlight
  • Holster NTH32
  • Clip
  • Lanyard
  • USB-C Charging Cable
  • User Manual
Nitecore EDC35 package contents including flashlight, holster, cable, lanyard, clip, and manual.

Image: Nitecore EDC35 package contents.

3. Features

  • Utilizes a 9-core UHi 40 MAX LED with a max output of 5,000 lumens.
  • Max peak beam intensity of 75,700cd and max throw of 550 meters.
  • 4 brightness levels to cycle through: ULTRALOW, LOW, MID, HIGH. SEARCH and LUMIN SHIELD™ modes are also available.
  • Powered by a built-in 6,000mAh Li-ion battery to provide a runtime up to 90 hours.
  • Rapid Lock™ available for Half Lockout Mode and Full Lockout Mode.
  • Power indicators show the remaining battery power.
  • Intelligent Li-ion battery charging circuit with a USB-C charging port.
  • Advanced Power Cut-Off (APC) technology for an ultralow standby power consumption.
  • Highly efficient constant current circuit provides a stable output.
  • Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6).
  • Optical lenses with double-sided scratch resistant coating.
  • Constructed from military grade aluminum alloy 7075-T6.
  • HA III military grade hard-anodized finish.
  • Tail stand capability.
  • Waterproof and dustproof rating in accordance with IP68 (2 meters submersible).
  • Impact resistant to 2 meters.
  • Stainless Steel Cyclone-Inspired Strike Bezel.
  • Large Hole DCP Clip and 550 Paracord Included.
  • Sensor Protection Function.
Nitecore EDC35 with UHi LED inside, titled 'Take Light to the Extreme'.

Image: Nitecore EDC35 highlighting UHi LED technology.

Nitecore EDC35 demonstrating 5000 lumens LUMIN SHIELD for instant defense.

Image: Nitecore EDC35 showing LUMIN SHIELD™ for instant defense.

Nitecore EDC35 showing the 6000mAh 21700 Li-ion battery.

Image: Nitecore EDC35 with its 6000mAh 21700 Li-ion battery.

4. Specifications

Technical Data
ModeBrightnessRuntimeBeam DistancePeak Beam Intensity
LUMIN SHIELD™ (Floodlight)5,000 Lumens—500m62,500cd
SEARCH (Spotlight)3,000 Lumens—550m75,700cd
HIGH1,300 Lumens4h 45min230m13,300cd
MID300 Lumens9h 15min200m10,600cd
LOW70 Lumens40h100m2,500cd
ULTRALOW5 Lumens90h27m190cd

Note: The stated data is measured using the built-in Li-ion battery (6,000mAh) under laboratory conditions. The data may vary in real-world use due to different environmental conditions.

  • Impact Resistance: 2m
  • IP Rating: IP68, 2m (Waterproof and Submersible)
  • Length: 124.3mm (4.89")
  • Head Diameter: 31.8mm (1.25")
  • Tube Diameter: 26.0mm (1.02")
  • Weight: 171g (6.03oz) (Clip Not Included), 178g (6.28oz) (Clip Included)
Nitecore EDC35 showing dimensions (length, head diameter, tube diameter).

Image: Nitecore EDC35 dimensions.

5. Setup

5.1 Lanyard Installation

To install the lanyard, thread the thin loop of the lanyard through the lanyard hole located at the tail cap of the flashlight. Secure it by passing the main part of the lanyard through the loop and pulling tight.

Nitecore EDC35 with lanyard installation diagram.

Image: Lanyard installation guide.

5.2 Charging Function

The EDC35 is equipped with an intelligent charging system. Please charge the battery before the first use.

  1. Power Connection: As illustrated, rotate the USB-C cover at the tail following the direction of the symbol to reveal the USB-C charging port.
  2. Use the provided USB-C cable to connect an external power supply (e.g., a USB adapter, a power bank, or other USB charging devices) to the charging port to begin the charging process.
Nitecore EDC35 showing the USB-C charging port with rotary protection cover.

Image: Hidden USB-C Charging Port with Rotary Protection Cover.

  • Charging Indication: During the charging process, the green power indicators will gradually transition from flashing to a steady light to display the battery level. When the battery is fully charged, the EDC35 will cease the charging process and the power indicators will become steadily turned on to confirm.
  • The lighting function is available during the charging process (LUMIN SHIELD™ and SEARCH excluded).
  • The charging time is approximately 3 hours 30 minutes (when charged via a 5V/2A adapter).
  • When fully charged, the standby time is approximately 12 months.

6. Operating Instructions

6.1 On/Off

  • Turn On: When the light is off, full press the Tail Button to turn it on.
  • Turn Off: When the light is on, full press the Tail Button to turn it off.

6.2 Brightness Levels

When the light is on, half press the Tail Button to cycle through the following brightness levels: ULTRALOW → LOW → MID → HIGH. The flashlight will directly access the previously memorized brightness level when reactivated.

Nitecore EDC35 showing intuitive operation with tactical tail button (half press for brightness/SEARCH, full press for On/Off/LUMIN SHIELD).

Image: Intuitive Operation with Tactical Tail Button.

6.3 Tactical Momentary Illumination

  • Direct Access to SEARCH: When the light is on/off, half press and hold the Tail Button to directly access SEARCH (3,000 lumens). Release to return to the previous status.
  • Direct Access to LUMIN SHIELD™: When the light is on/off, full press and hold the Tail Button to directly access LUMIN SHIELD™ (5,000 lumens). Release to return to the previous status.

6.4 Lockout/Unlock

The EDC35 has two lockout modes: Half Lockout Mode and Full Lockout Mode.

  • Half Lockout Mode: When the light is on, slide the Lockout Switch (Rapid Lock™) up while half / full pressing and holding the Tail Button to access Half Lockout Mode. The lock icon can be seen below the Lockout Switch (Rapid Lock™). In Half Lockout Mode, half press and hold the Tail Button to access SEARCH; full press and hold the Tail Button to access LUMIN SHIELD™.
  • Full Lockout Mode (Default Setting): When the light is on/off, slide the Lockout Switch (Rapid Lock™) up to access Full Lockout Mode. The lock icon can be seen below the Lockout Switch (Rapid Lock™), indicating that the Tail Button is unavailable to activate the flashlight.
  • Unlock: In either Lockout Mode, slide down the Lockout Switch (Rapid Lock™) to exit Lockout Mode.
Close-up of the Nitecore EDC35 Rapid Lock switch.

Image: Rapid Lock™ with Seamless Operation.

Nitecore EDC35 showing the Half Lockout Mode.

Image: Half Lockout Mode illustration.

6.5 Power Level Display

The 4 power indicators indicate the remaining battery power.

  • When the light is on, the Power Indicators will become steadily turned on to indicate the remaining battery power.
  • Half press the Tail Button and the Power Indicators will be on to indicate the remaining battery power (lockout modes excluded).
Status of IndicatorsPower Level
4 Constant-on75% - 100%
3 Constant-on50% - 75%
2 Constant-on25% - 50%
1 Constant-on0% - 25% (Please charge the product as soon as possible)
Nitecore EDC35 with power level indicators illuminated.

Image: Power Level Display.

6.6 Sensor Protection Function

When the flashlight is at HIGH mode, if the built-in optical sensor detects an obstruction ahead at close distance, the flashlight brightness will automatically decrease to 300 lumens to prevent overheating and prolong the lifespan of the flashlight. Once the obstruction is removed, the flashlight will return to the previous brightness level. The sensitivity of the sensor may differ due to variations in the color and material of obstructions.

  • Disable: The protective sensor is automatically enabled when the flashlight is powered on. Once activated, you can temporarily disable the sensor by briefly half pressing the Tail Button.

Note:

  • This feature is only available when the flashlight is at HIGH mode.
  • It is important to keep the front lens clean to ensure that the built-in sensor functions properly to achieve its optimal performance.
Nitecore EDC35 demonstrating the sensor protection function.

Image: Sensor Protection Function in action.

7. Maintenance

7.1 Battery Safety

Improper use of devices with built-in Li-ion batteries may result in severe battery damage or safety hazards such as combustion or explosion. Please observe the following:

  • DO NOT use the device if it is damaged.
  • DO NOT disassemble, puncture, cut, crush, or incinerate the device.
  • If any leakage or abnormal odor is noticed, stop using the device immediately.
  • Dispose of the device/batteries in accordance with applicable local laws and regulations.

7.2 General Care

  • DO NOT expose the product to temperatures above 60°C (140°F) for prolonged time, as this poses a risk of battery explosion or combustion.
  • Please recharge the product with the original charging cable to avoid shortening the lifespan of the battery.
  • Please recharge the product every 6 months when left unused for a prolonged term.
  • Keep the front lens clean to ensure the built-in sensor functions properly.
  • DO NOT submerge the product in any liquid when it is hot. Doing so may cause irreparable damage to the light due to the difference of air pressure inside and outside of the tube.

8. Troubleshooting

  • Light is dim or unresponsive: The battery may be low. Please recharge the product as soon as possible.
  • Accidental activation: Utilize the Rapid Lock™ feature to prevent accidental activation during transport or storage.
  • Overheating: The Advanced Temperature Regulation (ATR) module will automatically adjust output to prevent overheating. The Sensor Protection Function will also reduce brightness if an obstruction is detected. Avoid covering the flashlight head during prolonged high-brightness use.
  • Product not turning on: Ensure the flashlight is not in Full Lockout Mode. Slide the Rapid Lock™ switch down to unlock.

9. User Tips

  • Always use the Rapid Lock™ feature when storing the flashlight in a pocket or bag to prevent accidental activation and conserve battery.
  • Keep the USB-C charging port cover securely closed when not charging to maintain IP68 waterproof rating.
  • Regularly clean the front lens to ensure optimal performance of the sensor protection function.
  • The included holster and clip provide versatile carrying options; choose the one that best suits your activity for quick access.

10. Warranty and Support

10.1 Warranty Details

All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective / malfunctioning NITECORE® products can be repaired free of charge within 24 months from the date of purchase. Beyond 24 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.

The warranty will be nullified if:

  1. The product(s) are broken down, reconstructed and/or modified by unauthorized parties.
  2. The product(s) are damaged due to improper use.

10.2 Contact Information

For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or email us at info@nitecore.com.

SYSMAX Innovations Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882223
E-mail: info@nitecore.com
Web: www.nitecore.com
Address: Unit 1355, 5/F, No. 1021 Gaopu Road, Tianhe District, Guangzhou, 510653, Guangdong, China

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.