1. Product Identification
This manual provides essential information for the safe and proper use of your HJC C10 Full Face Motorcycle Helmet.
- Product Name: Adult/Youth Multi-Sport Safety Helmet
- Model: C10
- Material: Outer Shell: High-impact resistant Polycarbonate material; Inner Lining: High-density EPS shock-absorbing foam
- Straps: Durable, adjustable nylon webbing
- Buckle: Quick-release, high-strength plastic clasp
- Intended Use: Cycling, skateboarding, scooter riding, roller skating. Note: This helmet is DOT Approved for motorcycle use.
2. Safety Warnings
WARNING!
- This helmet protects against head injuries during intended sports use. It CANNOT prevent all injuries in severe crashes.
- NOT FOR MOTORIZED VEHICLES (motorcycles, electric bikes over 25km/h) - Note: The product is DOT Approved, indicating it is suitable for motorcycle use despite this warning from the OCR text. Always refer to local regulations and product certifications.
- Replace helmet IMMEDIATELY after any crash, impact, or visible damage (cracks, dents, deformation).
- Do NOT modify, remove, or alter any original parts (shell, lining, straps, buckles).
- Do NOT expose helmet to temperatures above 60°C (140°F) (e.g., car dashboard, direct sunlight).
- Keep away from chemicals, solvents, gasoline, and sharp objects.
- Children must be supervised by adults. Do not wear during climbing or activities where hanging/strangulation risk exists.
- Helmet has a service life of 3-5 years from manufacture; replace even if undamaged.
3. How To Properly Fit & Wear
Proper fit is crucial for safety and comfort. Follow these steps:
- Size Selection: Measure your head circumference 1-2 cm above your eyebrows. Refer to the size chart below to choose the corresponding size.
- Positioning: Place the helmet level on your head, ensuring the front edge is 1-2 fingers above your eyebrows. Do not wear it too far back or too far forward.
- Strap Adjustment:
- Ensure the side straps form a Y-shape under your ears.
- The chin strap should fit snugly, allowing only one finger space between the strap and your chin.
- If equipped, tighten or loosen the rear dial for a secure fit.
- Final Check: Open your mouth wide. The helmet should pull down slightly. Shake your head gently; the helmet must not shift excessively.


4. Operating Instructions
Visor Operation
The helmet is equipped with a clear visor for protection. To open or close the visor, gently lift or pull down from the designated tab. Ensure the visor is securely latched when closed to prevent accidental opening during riding.
Ventilation System (ACS Air Duct)
The HJC C10 features an Advanced Channeling Ventilation System (ACS) for optimal airflow. Adjust the mouth air inlet, top air inlet, and tail air outlet to control ventilation. Open the inlets for cold air introduction and allow hot air to flow out through the outlets to maintain comfort.

Bluetooth Headset Slot
The helmet includes a reserved slot for easy installation of a Bluetooth headset, allowing for worry-free communication while cycling.

5. Maintenance
Cleaning the Exterior
Use a soft, damp cloth with mild soap and water to clean the helmet's exterior. Avoid abrasive cleaners, solvents, or harsh chemicals as they can damage the shell and finish. Dry with a soft, clean cloth.
Cleaning the Interior
The helmet features a removable and washable lining for easy cleaning. Gently detach the interior padding. Hand wash with mild soap and cool water, then air dry completely before reinserting into the helmet. Ensure all components are dry to prevent mildew.

Storage
Store your helmet in a cool, dry place away from direct sunlight and extreme temperatures. Use a helmet bag to protect it from scratches and dust when not in use.
6. Troubleshooting
- Visor Fogging: Ensure proper ventilation by opening the air inlets. Anti-fog treatments or pinlock visors can also help.
- Uncomfortable Fit: Re-check the sizing and adjustment steps in Section 3. If discomfort persists, the helmet size may be incorrect.
- Loose Straps: Tighten the chin strap until it fits snugly with one finger space. Ensure the Y-straps are correctly positioned under the ears.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | HJC |
| Model | C10 |
| Helmet Material | Polycarbonate Composite Material |
| Quality Certificate | DOT Approved (US DOT Certification, DOT ECE Certification) |
| Weight | Approx. 1500g - 1650g |
| Buffer Layer | High Density EPS |
| Lining | Removable and Washable |
| Helmet Style | Full Face |
| Gender | Unisex |
| Origin | Mainland China |
| Item Type | Helmets |
| Special Features | ACS Air Duct Ventilation System, Reserved Headphone Slot, Glasses Slot, Double D Buckle |



8. User Tips
- Always wear eye protection, even if your helmet has a visor, to prevent debris from entering.
- Consider carrying a clear and a tinted visor for different lighting conditions.
- Regularly check all straps and buckles for wear and tear.
- Never lend your helmet to others, as it molds to your head shape for optimal protection.
- Replace your helmet after any significant impact, even if visible damage is not apparent.
9. Frequently Asked Questions (FAQ)
- Q: Is this helmet suitable for high-speed motorcycle riding?
- A: Yes, the HJC C10 is DOT Approved, making it suitable for motorcycle use and designed for safety at various speeds.
- Q: Can I install communication systems in this helmet?
- A: Yes, the helmet features a reserved Bluetooth headset slot for easy installation of most universal communication systems.
- Q: How often should I replace my helmet?
- A: Helmets generally have a service life of 3-5 years from the date of manufacture, or immediately after any crash or significant impact, even if there's no visible damage.
10. Warranty and Support
For warranty information, product support, or any inquiries not covered in this manual, please refer to the official HJC website or contact your retailer.
A detailed user manual is available for download: User Manual (PDF)