Sanendi INDIBA CET RET 448KHz Deep Care Machine Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the safe and effective use of the Sanendi INDIBA CET RET 448KHz Deep Care Machine. This advanced device utilizes high-frequency radio technology for various physical therapy, facial care, and body slimming applications. Please read this manual thoroughly before operating the machine to ensure optimal results and user safety.

2. Setup Instructions

1. Unpacking: Carefully remove all components from the packaging. Verify that all parts listed in the packing list are present and undamaged.
2. Placement: Place the main unit on a stable, flat surface in a well-ventilated area. Ensure there is sufficient space around the machine for operation and heat dissipation.
3. Power Connection: Connect the power cable to the machine and then to a suitable electrical outlet. The machine supports either 110V or 220V, depending on the model purchased. Ensure the correct voltage is used.
4. Probe Connection: Connect the desired treatment probes (CET, RET, JMD) to their respective ports on the main unit. Ensure connections are secure.
5. Negative Plate Connection: Connect the negative plate to its designated port. This plate is essential for the proper functioning of the device and must be in contact with the user's body during treatment.
6. Conductive Cream/Gel: Prepare the conductive cream or gel (e.g., Sanendi ACTIV CREAM) for application to the treatment area. This is crucial for effective energy transfer and to prevent skin irritation.

3. Operating Instructions

The Sanendi Deep Care Machine offers various modes for different therapeutic and aesthetic applications. Always ensure the skin is clean and a generous layer of conductive cream/gel is applied to the treatment area before starting.

3.1 General Operation

1. Power On: Press the power button to turn on the device. The screen will display the Sanendi logo.
2. Mode Selection: From the main interface, select the desired treatment mode: JMD, RET, or CET.
3. Parameter Adjustment: Adjust the energy level and treatment time according to the specific protocol and client comfort. Start with lower energy settings and gradually increase as needed.
4. Application: Gently move the selected probe over the treatment area in a continuous, circular, or linear motion. Maintain constant contact with the skin.
5. Power Off: After the treatment, turn off the device and disconnect the probes.

3.2 CET RF Ceramic Probe (Capacitive Electric Transfer)

The CET RF Ceramic Probe utilizes global advanced radio frequency technology to activate collagen regeneration. It penetrates deeply into the dermis to warm up tissues, promoting skin barrier repair, improving elasticity and luster, and restoring vitality. This mode is ideal for facial rejuvenation and superficial tissue treatments. Four probes can be quickly switched to suit different areas and treatment depths.

3.3 RES Deep Inner Hot Melt Fat Head (Resistive Electric Transfer)

The RES Deep Inner Hot Melt Fat Head employs 448KHz 'black technology' to target deeper tissues. In RES mode, positive and negative ion friction generates significant body heat, which helps to dissolve fat and accelerate blood and lymph circulation metabolism. The biothermal effect facilitates the decomposition of fat cells into free fatty acids and glycerol, which are then excreted through natural metabolic processes, contributing to weight loss and body contouring.

3.4 Negative Plate Usage

The negative plate is an integral part of the treatment. When using two different electrodes (the active probe and the negative plate), the positive and negative ions within the body's cells rub against each other to generate internal heat. This process, where negative ions rub against each other, can raise the local temperature of the body to 68-72 degrees Celsius, effectively generating heat and dissolving deep fat.

4. Maintenance

1. Cleaning: After each use, wipe the probes and the main unit with a soft, damp cloth. Use a mild disinfectant if necessary. Ensure no liquid enters the device.
2. Storage: Store the machine and its accessories in a clean, dry, and cool place, away from direct sunlight and extreme temperatures. Keep out of reach of children.
3. Cable Care: Avoid bending or twisting cables excessively. Store them neatly to prevent damage.
4. Conductive Cream: Ensure the conductive cream/gel is properly sealed after use to prevent drying out.

5. Troubleshooting

• Device not powering on: Check if the power cable is securely connected to both the machine and the electrical outlet. Ensure the outlet is functional.
• No heat or sensation during treatment: Verify that the probes and negative plate are correctly connected. Ensure sufficient conductive cream/gel is applied to the skin and the negative plate is in full contact with the body. Check the energy settings on the display.
• Error message on screen: Note down the error code or message and refer to the specific troubleshooting section in the full user manual (if available) or contact customer support.
• Unusual noise or smell: Immediately power off the device and disconnect it from the power source. Do not attempt to operate it again. Contact customer support for assistance.

6. Specifications

7. User Tips

• Always perform a patch test on a small area of skin before full treatment to check for any adverse reactions.
• Maintain consistent movement of the probe during treatment to ensure even heat distribution and prevent localized overheating.
• Ensure the conductive cream/gel is always present on the skin during treatment. Reapply as needed.
• Stay hydrated before and after treatments to support metabolic processes, especially for body slimming applications.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Keep your purchase receipt and product serial number handy for faster service.