1. Product Overview
1.1 Product Description
This product is designed for car modification, repairing, and upgrading the performance of your car. It is engineered with high-quality material to ensure durability and compliance with EU regulations.
1.2 Package Contents
The package includes:
- 1 x Main component (Boot Trunk Handle Release Switch)
Note: Auxiliary installation accessories need to be purchased separately.
2. Important Safety Warnings & Compliance
2.1 EU Regulatory Compliance
This product complies with EU regulations. Do not use or modify this component beyond the scope specified in this manual, as non-compliance may invalidate vehicle type approval and lead to legal liability.
2.2 Professional Installation Required
Installation must be performed by a qualified automotive technician with relevant EU automotive repair certifications (e.g., ASE, IMI). Improper installation may cause component failure, vehicle damage, or personal injury.
2.3 Safety Precautions
- Disconnect the vehicle battery before installation to avoid electrical short circuits.
- Wear protective gear (safety goggles, gloves, anti-slip shoes) during installation.
- Do not install or operate the product while the vehicle is in motion or the engine is running (except for post-installation testing as specified).
2.4 Compatibility Check
Verify that the product is compatible with your vehicle's make, model, and year before installation. Using incompatible components may result in mechanical malfunction or safety hazards.
3. Installation Instructions
3.1 Pre-Installation Preparation
- Park the vehicle on a flat, level surface and engage the parking brake. Turn off the engine and allow it to cool completely (minimum 30 minutes).
- Clean the installation area (e.g., engine bay, suspension mount) with a non-corrosive cleaner to remove dirt, oil, or debris. Dry thoroughly with a clean cloth.
3.2 Step-by-Step Installation
- Locate the original component to be replaced.
- Professional repair personnel are recommended for installation. If you choose to install it yourself, ensure you have rich experience and hands-on ability in this area.
3.3 Post-Installation Testing
- Test whether the installed product can be used normally (e.g., whether it triggers a car malfunction alarm and whether it affects driving).
- If any issues are detected, stop using the vehicle immediately and contact the manufacturer or a qualified technician for inspection.
- Complete all steps and clean the vehicle.
4. Product Specifications

Image: Dynoracing Boot Trunk Handle Release Switch with key specifications.

Image: Front view of the release switch highlighting the OEM number.
| Feature | Detail |
|---|---|
| Brand Name | Dynoracing |
| Model Name | BX101851 |
| Manufacturer Part Number | BX101851 |
| Other Part Number | BX101851 |
| Interchange Part Number | 7118158 |
| OEM NO. | 7118158, 51247118158 |
| Item Type | Door Handles (Boot Trunk Handle Release Switch) |
| Special Features | Handle Release Switch |
| Material | ABS |
| Color | Black |
| Car Model Compatibility | For BMW E82/E88 (Coupe and Convertible only), E90/E91/E92/E93, E60/E61 (models produced after 2005/03 only), E70/E71 |
| Item Weight | 0.06kg |
| External Testing Certification | CE |
| Country/Region of Manufacture | CN (Mainland China) |
5. Maintenance & Care
5.1 Regular Inspection
Inspect the component every 5,000 km or 6 months (whichever comes first). Check for loose bolts, cracks, corrosion, or wear. Tighten loose hardware and replace damaged parts promptly.
5.2 Cleaning
Clean the component with a soft brush. Avoid using abrasive cleaners, solvents, or high-pressure water, which may damage the surface or seals.
5.3 Replacement Interval
Replace the component if it shows signs of permanent damage.
5.4 Storage
If removing the component for long-term storage, clean it thoroughly, dry completely, and store in a cool, dry place away from direct sunlight and corrosive substances.
6. Troubleshooting
If you encounter any issues after installation, such as the product not functioning normally, triggering a car malfunction alarm, or affecting driving, immediately stop using the vehicle.
Contact the manufacturer or a qualified automotive technician for inspection and resolution.
7. User Tips
No specific user tips or common issues were available from customer reviews or Q&A for this product at this time. Always ensure professional installation and follow all safety guidelines.
8. Warranty Information
8.1 Warranty Coverage
The manufacturer provides a 1-year limited warranty from the date of purchase, covering defects in materials and workmanship under normal use and proper installation. This warranty applies only to the original purchaser and is non-transferable.
8.2 Warranty Exclusions
This warranty does not cover:
- Damage caused by improper installation, misuse, abuse, or modification of the product.
- Wear and tear due to normal use (e.g., surface scratches, minor corrosion).
- Damage from accidents, natural disasters, or exposure to extreme temperatures/chemicals.
- Failure to follow maintenance instructions outlined in this manual.
9. Support & Contact Information
Manufacturer Contact:
Company Name: Ruian Biaoxin Electronic Commerce Inc.
Address: No.190, Youdian South Road, Tingtian StreetRuiancity, Wenzhou, Zhejiang, China, 00
Email: jimix-racing@hotmail.com
Phone: 86-13967716933
EU Authorized Representative:
Company Name: ORIENT CONSULTING SL
Address: Av.de la Industria, 2, Nave 16, 28947 Fuenlabrada Madrid, Spain
Email: rae@orientconsulting.es
Phone: 34-912918327
For a downloadable PDF version of the user manual, please refer to the official product page or contact support.
10. Product Disposal
Please dispose of this discarded product in a reasonable manner according to local regulations, without polluting the environment and protecting the health of others.