Tedeligo 2201dm Wireless Remote Control Switch

Contents

Tedeligo 433MHz Wireless Light Switch and Mini Interruptor Relay Receiver User Manual

Model: 2201dm Wireless Remote Control Switch

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Tedeligo 433MHz Wireless Light Switch and Mini Interruptor Relay Receiver. Please read this manual thoroughly before use to ensure proper functionality and safety.

Safety Information

  • Ensure the power supply is disconnected before performing any wiring or installation.
  • All electrical work should be performed by a qualified electrician or in accordance with local electrical codes.
  • Do not expose the device to moisture or extreme temperatures.
  • Do not attempt to disassemble or repair the device yourself. Contact customer service for assistance.
  • The input terminal and output terminal cannot be reversed during wiring.

Package Contents

The package typically includes:

  • Wireless Relay Receiver (quantity varies by order, e.g., 1 receiver)
  • Wireless Remote Control (quantity varies by order, e.g., 1 remote with 1, 2, 3, or 4 gangs)
  • User Manual (PDF available online)

Refer to your specific order for exact quantities.

Tedeligo Wireless Light Switch components: receiver and various remote controls

Image: Overview of the Tedeligo wireless receiver and different remote control options.

Specifications

Feature Specification
Working VoltageAC 85V-250V
Max Current10A
Max Load2400W
Quiescent Current<5MA
Operation Frequency433.92MHz (RF frequency)
Working Temperature-10~+70 Celsius
Receiving Sensitivity>-97dbm
Amount of Storage Remote Controls20 pieces
Support Encoding1527 Learning code / 2262 fixed code
RF Operating ModeASK superheterodyne wireless reception
RF Receiving RangeAbout 30-50 meters indoor (Open space is more than 50 meters)
Channel1
Receiver Size47*28*22 mm
Weight40g
Remote Control Battery23A 12V (included)
CertificationCE, RoHS

Setup

Wiring Diagram

Before wiring, ensure the main power supply is turned off. Connect the receiver according to the diagram below. The input terminal (AC 85V-250V) and output terminal (to the lamp) cannot be reversed.

Wiring diagram for the smart switch showing AC input and lamp output connections. Input L and N, Output L and N. A red cross indicates that input and output terminals cannot be reversed.

Image: Simple wiring diagram. Connect AC 85V-250V to the input terminals (L and N) and your lamp to the output terminals (L and N). Ensure correct polarity and do not reverse input and output.

Application example in a kitchen with the smart switch wired to a lamp and controlled by a remote. Shows the wiring diagram again with input and output clearly marked.

Image: Example of the smart switch installed in a home lighting setup, demonstrating the connection between the power source, receiver, and lamp.

Antenna Adjustment

For better signal reception, slightly stretch the black antenna on the receiver.

Operating Modes

The receiver supports different operating modes. Signal pairing is required before use.

Pairing Method

Step-by-step pairing method for the smart switch. Step 1: Power on. Step 2: Press the learning button on the receiver twice. Step 3: Press the remote control button once. Step 4: Pairing succeeded.

Image: Visual guide for pairing the remote control with the receiver.

  1. Power On: Connect the receiver to the power supply.
  2. Enter Learning Mode: Press the learning button (on the receiver) twice. Wait for 1 second.
  3. Pair Remote: Press the desired button on the wireless remote control once.
  4. Success: The pairing is successful.

The receiver can store up to 20 remote controls.

Delete Signal (Clear All Paired Remotes)

To delete all stored remote control signals from the receiver:

  1. Press the learning button (on the receiver) 8 times.
  2. All existing data will be deleted. No wireless remote switch can control the receiver at this time.

Toggle Mode (Mode 1)

In Toggle Mode, one press turns the lamp ON, and another press turns it OFF using the same button.

  1. Set Mode: Press the learning button (on the receiver) 2 times. Wait for 1 second.
  2. Pair Remote: Press the desired button on the wireless remote control 1 time.
  3. Operation: Press the paired button once to turn the lamp ON, press it again to turn the lamp OFF.

Latched Mode (Mode 2)

In Latched Mode, one button turns the lamp ON, and a different button turns it OFF.

  1. Set Mode: Press the learning button (on the receiver) 3 times. Wait for 1 second.
  2. Pair ON Button: Press the "ON" button on the remote control once. Wait for 1 second.
  3. Pair OFF Button: Press the "OFF" button on the remote control once.
  4. Operation: Press the "ON" button to turn the lamp ON, press the "OFF" button to turn the lamp OFF.

Incoming Call Switching Function Mode

This mode determines the state of the light after repowering the receiver.

  • Status 1 (Default): After repowering, the light remains OFF.
  • Status 2: After repowering, the light will turn ON automatically.

How to switch between Status 1 and Status 2:

  1. Press the learning button (on the receiver) 6 times.
  2. The mode will switch between Status 1 and Status 2.
Diagram showing how multiple remotes can control one light, and one remote can control multiple lights, illustrating the flexibility of the system.

Image: Demonstrates scenarios where several remote controls can operate a single light, or one remote control can operate several lights.

Image showing the theoretical remote control distance of 500m in an open space, with a remote controlling a lamp via the receiver.

Image: Illustration of the effective range of the remote control, indicating a theoretical distance of 500 meters in open environments.

User Tips

  • Users have reported that the product works well and is easy to use once set up.
  • Ensure proper pairing of the remote and receiver for optimal performance.
  • If the remote control's LED flashes or does not light up, the battery power may be insufficient and needs to be replaced (uses 23A 12V battery).
  • For best signal reception, slightly extend the black antenna on the receiver.

Troubleshooting

  • No Response from Remote:
    • Check if the remote control battery (23A 12V) needs replacement.
    • Ensure the remote and receiver are properly paired. If not, follow the "Pairing Method" instructions.
    • Verify that the signal has not been accidentally deleted (if so, re-pair).
  • Light Not Turning On/Off:
    • Confirm that the receiver is correctly wired and receiving power (AC 85V-250V).
    • Check the lamp for functionality.
    • Ensure the input and output terminals are not reversed.
  • Poor Signal Reception:
    • Slightly stretch the black antenna on the receiver.
    • Reduce the distance between the remote control and the receiver.
    • Minimize obstructions (walls, metal objects) between the remote and receiver.
  • Unexpected Light Behavior After Power Cycle:
    • Review the "Incoming Call Switching Function Mode" settings and adjust if necessary.

Maintenance

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid dropping the device or subjecting it to strong impacts.
  • Store the device in a dry place away from direct sunlight when not in use for extended periods.
  • Replace the remote control battery (23A 12V) as needed.

Warranty and Support

For any questions about the product or if you encounter issues, please contact the manufacturer directly. Signal pairing is required before use.

Manufacturer: Huizhou Wenqiao Electronic Technology Co., Ltd.

Address: Room 03, 12th Floor, Building T19, East Coast Garden, Fangzhilonghuwan, No. 27, Sanhuan South Road, Huicheng District, Huizhou City, Guangdong Province, China 516001

WhatsApp: +86 135 02278583 / +86 181 3880 5271

Email: dieseelectronic@163.com

An item guide and document in PDF format is available for this product. You can view the User Manual (PDF) for additional information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.