1. Disclaimer and Safety Instructions
Disclaimer
- Thank you for purchasing the MS-A2 product.
- The contents mentioned in this disclaimer are related to your safety, legal rights, and responsibilities. Please pay attention to any warnings, cautions, and attention signs on the instructions and product labels, and install according to the instructions.
- The product is relatively complex, and users need to have basic hands-on installation skills and safety knowledge. You should be careful during installation.
- Before using this product, please read the instructions carefully to ensure that the product can be set up correctly. Failure to follow the instructions, warnings, cautions, and attention signs may damage the product or data, and may result in personal or property injury or loss.
- Once you use this product, you are deemed to have carefully read the content requirements of the disclaimer, warning, caution, and attention signs, understood and accepted all the contents. You promise to take full responsibility for the consequences of using this product. You promise to use this product only for legitimate purposes and agree to this statement and any policies and guidelines formulated by MINISFORUM.
- In addition to the warranty terms, MINISFORUM is not legally responsible for damage or injury caused directly or indirectly by using this product, especially those caused by failure to operate in accordance with safety guidelines. Users should follow the instructions mentioned in this statement and all safety guidelines.
- The final interpretation right of this statement belongs to MINISFORUM.
Safety Precautions
- Dust, moisture, and drastic temperature changes will affect the product life, so please try to avoid placing the product in these places.
- The suitable temperature for the MINI PC and accessories is 0°C ~ 35°C.
- Before using this product, make sure you leave enough space around the device for ventilation. Please don't block or cover these openings. Never insert objects of any kind into the ventilation openings.
- This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
- When you use power extension cords, the total current of all connected products should be within the rated current of cables, ensuring stable operation.
Maintenance Guideline
- Do not step on the power cord or put anything on your Mini PC.
- Do not spill water or any other liquid over this product.
- There's still some current passing through even when the system is off. To avoid severe damage caused by possible electric shock, plug out all power cables from sockets temporarily before cleaning or moving this product.
- If you encounter technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer.
2. Conventions Used In This Manual
Note: This message contains additional instructions for this item.
Important! This information contains instructions that must be followed.
Warning! This message contains information about user safety and product safety.
Package Contents
The package includes the following items:
- Ac Power Adapter
- Power Cord
- HDMI Cable
- SSD Heatsink
- Customized U.2 to M.2 Adapter
- U.2 Mounting Screw Set
- User Manual (PDF)
Note: The power adapter and other accessories included in the box will vary depending on the model parameter or area purchased.
3. Getting To Know Your Mini PC
The MINISFORUM MS-A2 is a compact yet powerful mini workstation designed for extreme performance. Below is an overview of its features and interfaces.


Interface Overview

The Mini PC features various ports and buttons for connectivity and control:
- Power Button: Turns the Mini PC on/off. Press for 10 seconds for forced shutdown.
- 3.5mm Combo Jack: Connects audio output to a power amplifier or headphones, and can also be used for external microphones.
- USB3.2 Gen1 Port: Provides data transfer up to 5 Gbit/s. For keyboards, pointing devices, cameras, hard disks, printers, and scanners.
- USB2.0 Port: Compatible with USB2.0 or USB1.1 devices like keyboards and printers.
- Reset Hole: Remove power, then hold for 10 seconds to restore BIOS to factory defaults. Important: If issues arise, try using the reset hole.
- SFP+ Interface: Supports standard SFP+ DAC cable, fiber optic module, or RJ45-SFP+ conversion module. Supports 10Gbps/1Gbps rate.
- RJ-45 LAN Port: Standard Ethernet connection for local area networks (2.5Gbps).
- TYPE-C Interface: Supports data transmission up to 10 Gbps via USB 3.2 Gen 2. Also supports Alt Mode DisplayPort (DP) for audio/video output and provides up to 15W (5V/3A) power.
- HDMI® Port: Uncompressed, fully digital audio/video interface for connecting external display devices and televisions.
- USB3.2 Gen2 Port: Provides data transfer up to 10 Gbit/s. For keyboards, pointing devices, cameras, hard disks, printers, and scanners.
- Power Input: Connects the provided power adapter. Warning: The power adapter may get hot during use; do not place it close to your body.
- Air Vent: Expels hot air. Important: Ensure vents are clear for optimal heat dissipation.
4. Setup Guide
Connecting Peripherals
Follow these steps to connect your Mini PC:
- Connect the display to the Mini PC's HDMI port or TYPE-C port.
- Connect the keyboard and mouse.
- Connect the provided power adapter to your Mini PC.
- Turn on the power and start the Mini PC.

DIY DDR (RAM) Installation
To install or upgrade DDR memory:
- While pressing the button on the chassis, pull out the motherboard case.
- First, remove the radiator (if present), then insert the memory into the memory slot as shown in the diagram.

DIY PCIE Expansion Card Installation
To install a PCIe expansion card:
- Use a tool to unscrew the positioning clamp screw, press the positioning clamp to take it out, and remove the baffle.
- Insert the expansion card into the motherboard slot in an oblique direction, and then insert the expansion card parallel into the PCIe slot with both hands.
Note: Only half-height single-slot PCIe expansion cards are supported.

DIY Customized U.2 to M.2 Installation
To install a U.2 drive using the custom M.2 adapter:
- Assemble the U.2 hard drive to the U.2 to custom M.2 adapter card and lock the screws.
- Insert the U.2 to private M.2 adapter card into the M.2 slot, align it, and tighten the fixing screws.
- Finally, connect the power cable.
DIY SSD (M.2 NVMe SSD) Installation
To install an M.2 NVMe SSD:
- Insert the SSD card into the card slot at an angle and secure it with screws.
- For 22110 SSD installation, you may need to unscrew the hexagonal screw post first.
- Re-tighten the screws of the heat dissipation bracket and install the motherboard case into the chassis.
5. Operating Instructions
Power Management
- Power On/Off: Press the power button to turn the Mini PC on or off.
- Sleep Mode: Press the power button once to put the Mini PC into sleep mode.
- Force Shutdown: If the Mini PC is frozen or unresponsive, press and hold the power button for at least 10 seconds to force a shutdown.
Display Setup
The MS-A2 supports triple independent displays, allowing for efficient multitasking. Connect your monitors to the HDMI and Type-C (Alt DP2.0) ports as needed.
Network Connectivity
Utilize the dual 10G SFP+ ports and dual 2.5G RJ45 LAN ports for high-speed wired network connections. The integrated Wi-Fi 6E provides fast wireless connectivity.
6. Maintenance Guidelines
- Do not step on the power cord or place anything on your Mini PC.
- Avoid spilling water or any other liquid on the product.
- Even when the system is off, some current may still be present. To prevent electric shock or damage, unplug all power cables from sockets before cleaning or moving the product.
- If technical problems occur, unplug the power cord and contact a qualified service technician or your retailer.
7. Troubleshooting (FAQ)
- Slow Start-up: If the start-up speed is slow (e.g., after an unexpected restart, BIOS reset, memory bank replacement, or SSD replacement), it will generally return to normal after one successful power-on and power-off cycle.
- Graphics Memory: The integrated graphics card will utilize a portion of the system's main memory as GPU-specific memory.
- M.2 SSD Compatibility: All M.2 slots only support NVMe SSDs based on PCIe, not SATA protocol. The U.2 adapter card also exclusively supports NVMe U.2 2.5-inch 7mm height hard drives based on the PCIe protocol.
- CPU Temperature: During high-load operation, the CPU temperature can reach up to 94°C, which is considered normal for this device.
- SSD Overheating: To prevent SSD overheating, the two SSDs on the right side of the back support a maximum speed of PCIe 4.0x4, but are set to PCIe 3.0x4 by default. You can adjust this to PCIe Gen4 speed in OnBoard Settings in BIOS, but it may cause the SSD to overheat, potentially leading to blue screens, freezes, or data loss.
8. Specifications

| Component | Specification |
|---|---|
| CPU | AMD Ryzen™ 9 9955HX (16 Cores, 32 Threads, 64M L3 Cache, Max Boost Clock up to 5.4 GHz) or AMD Ryzen™ 9 7945HX (16 Cores, 32 Threads, 64M L3 Cache, Max Boost Clock up to 5.4 GHz) or AMD Ryzen™ 9 7940HX |
| GPU | AMD Radeon™ 610M |
| Memory | Up to 96GB DDR5 (SO-DIMM x2) Ryzen 9000 Series: DDR5-5600 Ryzen 7000 Series: DDR5-5200 |
| Storage | M.2 2280/U.2 NVMe SSD x1 (Up to 15TB U.2 PCIe 4.0x4) M.2 2280/22110 NVMe/SATA SSD x2 (Up to 4TB/Slot, default PCIe 3.0x4, up to PCIe 4.0x4) |
| Wireless Connectivity | Wi-Fi 6E, Bluetooth 5.2 |
| Video Output | HDMI2.1 x1 (Up to 8K@60Hz) Type-C (Alt DP2.0) x2 (Up to 8K@60Hz/4K@144Hz) |
| Audio Output | HDMI x1; Type-C x2; 3.5mm Combo Jack 4 in 1 x1 |
| Audio Input | 3.5mm Combo Jack x1 |
| Front I/O Ports | 3.5mm Combo Jack 4 in 1 x1; USB 3.2 Gen1 (5Gbps) x2; USB 2.0 x1 |
| Back I/O Ports | USB-C (USB3.2 Gen2 10Gbps, Alt DP2.0) x2 HDMI 2.1 x1 2.5Gb LAN (RJ45, Realtek RTL8125) x2 10G SFP+ (Intel X710) x2 USB3.2 Gen2 (10Gbps) x1 USB3.2 Gen1 (5Gbps) x1 |
| PCIE Expansion | PCIe x16 (PCIe 4.0 x8 Splitting Supported) |
| Button/Hole | Power Button x1; Reset Hole x1 |
| Power Adapter | 19V/12.63A |
| OS | Windows 11 |
| Product Dimension | 196 x 189 x 48mm |
9. User Tips
- U.2 Drive Support: A significant advantage of the MS-A2 is its ability to install an NVMe U.2 drive, offering massive storage expansion up to 15TB.
- Network Performance: While the standard Ethernet ports are 2.5Gbps, the inclusion of two 10Gbps SFP+ ports provides excellent high-speed networking capabilities, especially useful for server applications or demanding data transfers.
- Memory Upgrades: The system supports up to 96GB of DDR5 RAM across two SO-DIMM slots. Ensure compatibility with the specific Ryzen series (DDR5-5600 for 9000 series, DDR5-5200 for 7000 series).
- SSD Brands: The brand of pre-installed memory and NVMe SSD may vary.
10. Warranty and Support
Contact Information
For technical support or inquiries, please use the following contact details:
- Manufacturer: Micro Computer (HK) Tech Limited
- Website: https://www.miniscloud.com
- Online Technical Support: https://www.minisforum.com/new/support
- Email: support@minisforum.com
- Telephone: 852-23860910
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Transmitters in the 5.925-7.125 GHz band are prohibited from operating to control or communicate with unmanned aircraft systems.
FCC regulations restrict the operation of this device to indoor use only. It is prohibited on oil platforms, cars, trains, boats, and aircraft, except it is permitted in large aircraft while flying above 10,000 feet. This product is only suitable for indoor use only.
For a comprehensive user manual, please refer to the official PDF document: MINISFORUM MS-A2 User Manual (PDF)