1. Product Overview
This manual provides instructions for the installation, use, and maintenance of your new Titanium Stainless Steel Watch Strap, designed for various Samsung Galaxy Watch models. Please read this manual carefully before use.
1.1 Compatible Models
- Samsung Galaxy Watch 7 (40mm, 44mm)
- Samsung Galaxy Watch 7 FE
- Samsung Galaxy Watch 6 (40mm, 44mm)
- Samsung Galaxy Watch 6 Classic (43mm, 47mm)
- Samsung Galaxy Watch 5 Pro (45mm)
- Samsung Galaxy Watch 5 (40mm, 44mm)
- Samsung Galaxy Watch 4 (40mm, 44mm)
- Samsung Galaxy Watch 4 Classic (42mm, 46mm)
The strap is designed to be universal across these listed models.
1.2 Package Contents
- 1x Titanium Stainless Steel Watch Strap
- 1x Quick Release Pins Set
- 1x Link Adjustment Tool (Screwdriver/Spring Bar Tool)

2. Setup and Installation
2.1 Attaching the Strap to Your Watch
The strap features a quick-release design for easy installation and removal.
- Locate the quick release pin on the strap.
- Gently push the pin inward to compress the spring bar.
- Align the strap with the lug holes on your watch case.
- Release the pin, ensuring both ends of the spring bar securely fit into the watch's lug holes.
- Lightly tug on the strap to confirm it is properly installed and not loose.


2.2 Adjusting Strap Length
To ensure a comfortable fit, you may need to add or remove links from the strap. Use the provided link adjustment tool (screwdriver/spring bar tool) for this process.
- Prepare your tools: screwdriver, spring bar tool, and a lint-free cloth.
- Gently push the buckle to unlock and fully open the strap.
- To remove a link: Use the tool to insert into the band hole, press down slightly, and push out the link pin. Keep all removed accessories (spring bar, tool, links) well.
- To add a link: Hold the spring bar in place by hand and aim it at one of the holes in the link. Use the tool to press down the spring bar and push the link in. Then loosen the tool and slightly adjust the link to make both sides of the spring bar buckle firmly.
- Handle the strap with care throughout the process to avoid damaging the lugs and spring bars by prying forcefully.
- After confirming the strap is properly installed and not loose, wipe the watch and strap with the lint-free cloth to complete the process.

3. Correct Wearing Method
3.1 Wearing Position
Wear the watch above the wrist bone on the side close to the elbow. Ensure the case back is in full and tight contact with the skin, and avoid the center of the wrist bone. This ensures optimal sensor accuracy.
3.2 Regular Tightness
The strap should fit the wrist comfortably with a slight gap for skin ventilation. Avoid excessive tightness that leaves marks or excessive looseness that impairs sensor accuracy.
3.3 Fit Test
Shake your wrist; if the watch case back detaches from the skin, tighten the strap accordingly.
3.4 Adjustment for Exercise
Tighten the strap moderately during exercise to improve accuracy, and loosen it promptly after exercise to restore comfort.


4. Maintenance and Care
4.1 Cleaning and Maintenance
Wipe the strap regularly with a soft, damp cloth. Air-dry it in a well-ventilated place and avoid direct sunlight. Keep the strap away from harsh chemicals. Replace the strap promptly if it becomes worn or deformed.
4.2 Material Sensitivity
If you experience any discomfort when wearing the watch for the first time, stop using it immediately, clean your skin, and seek medical advice if necessary.
4.3 Safety Check
Before each wear, inspect the strap fasteners and connections. Stop using the watch immediately and have it repaired or replaced if any part is loose or malfunctioning.
5. Specifications
| Feature | Detail |
|---|---|
| Brand | CAOWTAN |
| Compatible Brand | Samsung Galaxy |
| Band Material Type | Stainless Steel (Titanium Alloy) |
| Titanium Content | Approximately 95% (Real titanium alloy) |
| Buckle Material | Stainless Steel |
| Strap Weight | Approx. 62g+ (Titanium) |
| Package Dimensions (L x W x H) | 27 cm x 12 cm x 1 cm |
| Package Weight | 0.086 kg |
| Origin | Mainland China |



6. User Tips
- Easy Installation: Many users find the quick-release mechanism makes installation very fast, often within seconds.
- Lightweight Comfort: The titanium alloy construction provides a lighter feel compared to traditional stainless steel bands, enhancing comfort for daily wear.
- Seamless Design: The strap is designed to fit snugly against your Galaxy Watch, eliminating gaps and providing a classy, integrated look.
- Adjustment Tools Included: The package includes tools necessary for adjusting the strap length by adding or removing links, ensuring a perfect fit.
7. Warranty and Support
For detailed information regarding warranty coverage and customer support, please refer to the official product documentation. A user manual in PDF format is available for viewing:
If you encounter any issues with the product, please contact the seller or manufacturer for assistance.