1. Introduction
The Tuya Smart WiFi Switch offers versatile control over your lighting and appliances. It combines WiFi connectivity for app and voice control with RF 433MHz for wireless wall switches, providing convenience and flexibility in your smart home setup. This manual will guide you through the installation, operation, and maintenance of your smart switch system.

Figure 1: System Overview - Illustrates compatibility with Alexa, Google Assistant, Smart Life, Tuya, and WiFi 433MHz. Shows the mini smart switch receiver, various wireless wall switches, and app control.
2. Setup
2.1 Component Identification
- Mini Smart Switch (Receiver): This is the main control unit that connects to your electrical wiring and WiFi.
- Wireless Wall Switch (Transmitter): Battery-powered switches that communicate with the receiver via RF 433MHz. Available in 1-gang, 2-gang, and 3-gang configurations.

Figure 2: Smart Switch Components - Shows the Mini Smart Switch receiver and 1-gang, 2-gang, and 3-gang wireless wall switches.
2.2 Wiring Method (Receiver)
WARNING: Ensure power is turned off at the circuit breaker before performing any wiring. If you are unsure, consult a qualified electrician.
- Connect the Live wire (L-in) and Neutral wire (N-in) from your power supply to the corresponding terminals on the Mini Smart Switch.
- Connect the Live wire (L-out) and Neutral wire (N-out) to your light fixture or appliance.
- S1 and S2 terminals are typically used for external switch connections if desired, but are not required for wireless operation.

Figure 3: Wiring Diagram - Detailed connection points for L-Out, L-in, N-in, N-Out, S1, and S2 on the Mini Smart Switch receiver.
2.3 Pairing Wireless Wall Switch with Receiver
The wireless wall switch needs to be paired with the Mini Smart Switch receiver to control your lights.
- Initiate Pairing on Receiver: Press the learning button on the Mini Smart Switch receiver twice. Wait for approximately 3 seconds.
- Activate Transmitter: Within the pairing window, press any button on the wireless wall switch twice.
- Confirmation: The light connected to the receiver should toggle, indicating successful pairing.

Figure 4: Pairing Method - Visual guide for pressing the receiver button twice, then the wireless switch button twice to pair.
2.4 App Installation and Connection
- Download the