LiitoKala 32140 3.2V 15Ah

Contents

LiitoKala 32140 3.2V 15Ah LiFePO4 Rechargeable Battery User Manual

Model: 32140 3.2V 15Ah | Brand: LiitoKala

1. Introduction

This manual provides essential information for the safe and effective use of your LiitoKala 32140 3.2V 15Ah LiFePO4 rechargeable battery. Please read this manual thoroughly before using the battery and keep it for future reference. This product is a high-performance cylindrical lithium-ion cell designed for various applications requiring reliable power.

Two LiitoKala 32140 LiFePO4 battery cells
Figure 1: Two LiitoKala 32140 LiFePO4 battery cells, showing positive and negative terminals and product labels.

2. Safety Information and Precautions

WARNING: Improper use of LiFePO4 batteries can be dangerous. Always follow these safety guidelines to prevent injury or damage.

  • Do not expose the cell to extreme heat or flame.
  • Do not short circuit, over-charge, or over-discharge the cell.
  • Do not subject the cell to strong mechanical shocks.
  • Do not immerse the cell in water or seawater, or get it wet.
  • Do not reverse the polarity of the cell for any reason.
  • Do not disassemble or modify the cell.
  • Do not handle or store with metallic items like necklaces, coins, or hairpins, as this can cause a short circuit.
  • Do not use the cell with conspicuous damage or deformation.
  • Do not connect the cell directly to a plug socket or car-cigarette-plug.
  • Do not make direct soldering onto a cell.
  • Do not touch a leaked cell directly.
  • Do not use for other equipment unless specified as compatible.
  • Do not mix with other Lithium-ion cells.
  • Do not use or leave the cell under direct blazing sun or in a heated car.
  • Keep cells away from children.
  • Do not drive a nail into the cell, strike it with a hammer, or tread on it.
  • Do not impact or fling the cell.
  • All tests related to safety (over-charge, over-discharge, short-circuit, crush, heating, temperature cycling) are performed under controlled conditions to ensure no explosion or fire.
Corroded battery terminal
Figure 2: Example of a corroded battery terminal. Avoid such conditions and do not use damaged cells.

3. Product Overview and Components

The LiitoKala 32140 LiFePO4 battery is a cylindrical rechargeable cell. It is composed of a cathode pole piece, anode pole piece, diaphragm, aluminum shell, positive plate, and negative plate.

Model Designation Breakdown (IFR33140):

  • LiitoKala: Manufacturer's brand.
  • I: Denotes Lithium-ion.
  • F: Denotes Ferrum (Iron).
  • R: Denotes Rotundity (Cylindrical shape).
  • 33: Indicates a nominal diameter of 33mm.
  • 140: Indicates a nominal height of 140mm.

Note on Model Number: While the product is often referred to as "32140", the internal designation "IFR33140" suggests a nominal diameter of 33mm. Please verify physical dimensions if precise fitment is critical.

LiitoKala 32140 battery size comparison
Figure 3: Size comparison of the LiitoKala 32140 LiFePO4 battery with common smaller batteries.
LiitoKala 32140 battery in a holder
Figure 4: A LiitoKala 32140 LiFePO4 battery cell inserted into a plastic battery holder.

4. Specifications

Below are the detailed specifications for the LiitoKala 32140 3.2V 15Ah LiFePO4 battery.

LiitoKala 32140 LiFePO4 battery specifications table
Figure 5: Detailed specifications for the LiitoKala 32140 LiFePO4 battery.

General Specifications:

Attribute Value
BrandLiitoKala
Model Number32140 (IFR33140)
TypeLiFePO4
Nominal Voltage3.2V
Nominal Capacity15Ah (15000mAh)
Internal Resistance≤2mΩ (typically <5 mohms)
Cycle Life>2000 times (DOD at 80%), >2500 cycles (70% initial capacity), >1000 cycles at 45°C (70% initial capacity)
Discharge Cut-off Voltage2.5V (Recommended 1.80V/cell)
Input Charging Voltage3.65V/cell
Input Charging Current5A (Standard), 7.5A (Fast Charge)
Continuous Discharging Current75A (5C)
Max Continuous Discharge Current30000mA (3C)
Charging Temperature0~45°C
Discharging Temperature-20~60°C
Storage Temperature-20~45°C (Short-term), 0~25°C (Long-term)
Battery WeightApprox. 298g ± 5g
Battery Size32mm (Diameter) x 140mm (Height)
CertificationNONE (as per product data)

Electrical Performance (Summary from PDF):

  • Temperature Dependence of Discharge Capacity:
    • -20°C: ≥70% Retention Ratio
    • -10°C: ≥80% Retention Ratio
    • 0°C: ≥85% Retention Ratio
    • 25°C: 100% Retention Ratio
    • 45°C: ≥100% Retention Ratio
    • 60°C: ≥100% Retention Ratio
  • 100% SOC Temperature Charge Retention and Regain:
    • 28 days, 25°C, 100% SOC: Retention Ratio ≥96%, Recovery Ratio ≥97%
    • 28 days, 45°C, 50% SOC: Recovery Ratio ≥95%
    • 7 days, 55°C, 100% SOC: Retention Ratio ≥95%, Recovery Ratio ≥96%

5. Setup and Initial Use

Before initial use, it is recommended to fully charge the battery. Ensure all connections are secure and correct polarity is observed. These batteries are suitable for building custom battery packs for applications such as electric vehicles, electric bicycles, scooters, golf trolleys, wheelchairs, medical instruments, solar supply systems, energy storage, power tools, and LED lighting devices.

Battery cells with multimeter for testing
Figure 6: Testing battery cells with a multimeter before assembly or use.

Measuring Dimensions and Weight:

Use a caliper to measure the diameter and height of the cell. Use an electronic scale to measure the weight of the cell. This helps verify the product specifications upon receipt.

Caliper measuring battery diameter
Figure 7: A caliper measuring the diameter of a LiitoKala 32140 LiFePO4 battery cell.

6. Operating Instructions

6.1. Charging

Charge the cell in an ambient temperature range of 0°C to 55°C. The recommended charging method is Constant Current-Constant Voltage (CC-CV).

  • Standard Charge: Charge at a constant current of 0.5C (7.5A) until the voltage reaches 3.65V. Then, continue charging at a constant voltage of 3.65V until the current drops below 0.05C (0.75A).
  • Fast Charge: Charge at a constant current of 7.5A (0.5C) until 3.65V, then constant voltage at 3.65V until current is less than 0.05C. Charging rates greater than 15000mA (1C) are not recommended.
  • For maximum capacity, maintain charge voltage at 3.65V for 1 hour.

Temperature Gradient Charging Scheme:

SOC 0°C~5°C 5°C~10°C 10°C~15°C 15°C~45°C 45°C~55°C
100%0.05C0.05C0.05C0.05C0.05C
90%0.15C0.3C0.4C0.5C0.5C
80%0.25C0.3C0.4C0.5C0.5C
70%0.25C0.3C0.4C0.5C0.5C
60%0.25C0.3C0.4C0.5C0.5C
50%0.25C0.3C0.4C0.5C0.5C
40%0.25C0.3C0.4C0.5C0.5C
30%0.25C0.3C0.4C0.5C0.5C
20%0.25C0.3C0.4C0.5C0.5C
10%0.25C0.3C0.4C0.5C0.5C
0%0.25C0.3C0.4C0.5C0.5C

6.2. Discharging

  • Standard Discharge: Discharge at a constant current of 0.5C (7.5A) until the voltage reaches 2.5V.
  • Recommended Cut-off Voltage: 2.5V.
  • Recommended Max Continuous Discharge Current: 45000mA (3C).
  • For maximum performance, discharge the cell in an ambient temperature range of -20°C to 60°C.

7. Maintenance and Storage

7.1. Storage Recommendations

  • Short Period Storage (less than 3 months): Store the cell at a temperature of 0°C~45°C, in low humidity, and a non-corrosive gas atmosphere.
  • Long Period Storage (more than 3 months): Store the cell at a temperature range of 0°C~25°C, in low humidity, and a non-corrosive gas atmosphere.
  • Do not press on the cell during storage.
  • The capacity of the battery when shipped is approximately 30% of its full charge. Due to self-discharge, the delivered capacity may not be exactly 30% upon arrival.

7.2. Transportation

During transportation, keep the cell from acute vibration, impacting, solarization (exposure to sun), and drenching (getting wet).

8. Troubleshooting

If you encounter issues with your LiitoKala 32140 LiFePO4 battery, consider the following:

  • Battery not charging:
    • Check if the charger is compatible and functioning correctly.
    • Verify that the charging temperature is within the 0°C~45°C range.
    • Ensure correct polarity connections.
  • Battery not discharging/low power:
    • Check the load for short circuits or excessive current draw.
    • Verify that the discharge temperature is within the -20°C~60°C range.
    • Ensure connections are secure and free from corrosion.
  • Unusual heat during operation:
    • Immediately disconnect the battery from the load/charger.
    • Check for short circuits in the system or excessive current.
    • Ensure proper ventilation around the battery.
  • Visible damage or leakage:
    • Do not use the battery.
    • Handle with extreme care and dispose of properly according to local regulations.
    • Do not touch leaked material directly.
  • Voltage drop/loss over time (self-discharge):
    • A small amount of self-discharge is normal. However, significant daily voltage loss (e.g., 0.05V per day) may indicate a faulty cell.
    • Isolate and test individual cells if part of a pack to identify the problematic cell.

For complex issues or if you suspect a manufacturing defect, please contact LiitoKala customer support.

9. User Tips

  • Verify Specifications: Upon receiving your batteries, it's a good practice to check the internal resistance and voltage of each cell. While the stated weight is around 298g, some users have reported weights closer to 393g.
  • Check Dimensions: Be aware that while the model number is "32140", the internal specification "IFR33140" suggests a 33mm diameter. Measure your cells with a caliper if precise fitment in a cell holder is critical.
  • Test Capacity: For critical applications, test the actual capacity of your cells under a representative load (e.g., 10 amperes) to ensure they meet the stated 15Ah capacity.
  • Monitor Voltage Spread: When building battery packs, ensure the voltage spread among cells is minimal (e.g., within 0.05V out of the box) for optimal performance and longevity.
  • Watch for Self-Discharge: Monitor individual cells for unusual self-discharge rates. A cell losing significant voltage daily might be faulty and should be replaced.

10. Warranty and Support

The warranty period for the cell is determined by the business contract. LiitoKala will not replace a new cell for free if the problem is due to customer's abuse, misuse, or handling outside of the precautions in this instruction manual. This also applies to issues arising from incorrect matching of electric circuits, cell packs, or chargers, or defects during assembly after acceptance.

For safety assurance, or if you have specific equipment design, lithium-ion cell system protection circuit, fast charging, or other special application requirements, please consult LiitoKala first.

Contact Information:

  • Email: sales@liitokala.com.cn
  • Website: http://www.liitokalar.com.cn
  • Address: 6F building 5, MaoBang industrial Area, Gentleman's cloth, GuanLan Town, Baoan District, Shenzhen City, Guangdong China

11. Frequently Asked Questions (FAQ)

Q: What is the difference between LiFePO4 and other lithium-ion batteries?
A: LiFePO4 (Lithium Iron Phosphate) batteries are known for their high safety, long cycle life, and stable discharge characteristics. They are less prone to thermal runaway and explosion compared to some other lithium-ion chemistries like lithium cobaltate or lithium manganate.
Q: Can I use these batteries in series or parallel?
A: Yes, these cells can be combined to form battery packs (e.g., 3s, 4s, 8s, 10s, 13s) to achieve desired voltage and capacity. However, it is crucial to use a Battery Management System (BMS) for balancing, over-charge/discharge protection, and temperature management, especially for larger packs. Ensure all cells are matched in voltage and internal resistance before combining.
Q: What is the recommended storage State of Charge (SOC)?
A: For long-term storage, it is generally recommended to store LiFePO4 batteries at around 50% SOC to maximize their lifespan. Avoid storing them fully charged or fully discharged for extended periods.
Q: What should I do if a battery cell is damaged or leaking?
A: Immediately stop using the damaged or leaking cell. Do not touch leaked material directly. Isolate the cell and dispose of it safely according to local regulations for hazardous waste. Do not attempt to repair it.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.