1. Introduction
This manual provides detailed instructions for the installation, setup, and operation of your BENEWTON Tuya WiFi Smart Ceiling Light. Designed for modern homes, this smart ceiling light offers a full spectrum of lighting, multiple aesthetic modes, and seamless integration with popular smart home platforms like Amazon Alexa, Google Assistant, and IFTTT.
2. Technical Specifications
| Parameter | Value |
|---|---|
| Product Name | TUYA Smart Ceiling Light |
| Product Dimensions | φ490mm*H40mm (19.26in diameter, 1.54in height) |
| Control Methods | Tuya APP, 2.4G Hz Remote, Wall switch, Xiaomi XiaoAI, Baidu Xiaodu Speaker, Tmall Genie, Google Home, Amazon Alexa, IFTTT |
| Rated Power | 50W |
| Input Voltage | 220-240VAC |
| Power Factor | 0.97@50W |
| Color Rendering Index (CRI) | RA97@4000K |
| Product Material | Aluminum alloy frame + sheet metal (PS Material Lampshade) |
| Product Weight | 2.2kg |
| Standby Power | 0.5W |
| Protection Class | IP40 (dust, insect, moisture-resistant) |
| Warranty | 1 Year |
3. Safety Information
- Ensure the power is turned off at the main circuit breaker before installation or maintenance.
- Installation should be performed by a qualified electrician if you are unsure.
- Do not expose the light fixture to direct water spray or immerse it in water, despite its IP40 rating for moisture resistance.
- Keep out of reach of children.
- Use only with the specified voltage (220-240VAC).
4. Installation
The BENEWTON Smart Ceiling Light is designed for surface-mounted, self-contained installation. While specific steps are not provided in this document, general ceiling light installation procedures apply.
General Installation Steps:
- Power Off: Turn off the power to the light fixture at the circuit breaker.
- Mounting Bracket: Attach the mounting bracket to the ceiling junction box using appropriate screws.
- Wiring: Connect the household electrical wires to the light fixture's wires according to local electrical codes (typically live to live, neutral to neutral, and ground to ground).
- Secure Fixture: Carefully push the light fixture up to the ceiling and secure it to the mounting bracket.
- Power On: Restore power at the circuit breaker and test the light.
5. Smart Network Configuration (Tuya Smart APP)
5.1 Download the Tuya Smart APP
Scan the QR code below or search for "Tuya APP" in your device's app store (e.g., Google Play Store, Apple App Store) to download and install the application.
Important Network Requirement: Your router must have a 2.4G WiFi signal. 5G WiFi is not supported, and the 2.4G and 5G SSIDs should not share the same name.
5.2 Entering Network Configuration Mode
To put the ceiling light into network configuration mode:
- Quickly toggle the wall switch connected to the light ON and OFF more than 7 times.
- Alternatively, press and hold the remote control group button [A] + [Brightness +] simultaneously for 5 seconds.
The ceiling light will alternate between blue and white light, indicating it has entered network configuration mode.
5.3 Adding Device in Tuya Smart APP
- Open the Tuya Smart APP.
- Tap the '+' icon in the top-right corner.
- Select 'Add Device'.
- The APP will automatically search for the Ceiling Light. Tap it to start the network configuration process.
6. Operating Instructions
6.1 Tuya Smart APP Controls
Once connected to the Tuya Smart APP, you can control various aspects of your ceiling light:
- Master Switch: Turn the light On/Off.
- Brightness: Adjust brightness from 5% to 100%.
- Color Temperature (CCT): Adjust color temperature from 1800K (warm) to 12000K (cool).
- Scene Modes: Select from various pre-set scene modes like Morning Sun, Eye Comfort, Noon Sun, Sunset, Bright Moon, Dormitive, Sun Room, Rising Sun, Setting Sun, Blue Skies, White Cloud, Food Yellow.
- Do-Not-Disturb Mode: Prevents the light from automatically turning on after a power outage.
6.2 Remote Control Usage
The included 2.4G Hz remote control provides convenient access to key functions:
- Pairing: Within 3-30 seconds of powering on the lamp, long press the group button (A or B) for 5 seconds. The light will flash upon successful pairing.
- Release Distribution Network: At any time, press and hold the group button and the brightness decrease button for 5 seconds.
- Release All Channel Distribution Networks: Press and hold the light ON button and brightness decrease button for 5 seconds simultaneously.
- Favorite Collection (H1/H2): Long press H1 or H2 to save the current scene. Short press to recall a saved scene.
- Scene Switching: Short press to cycle between 6 scenes and 5 skyline effects.
- WiFi Distribution Network (Remote): Press and hold the [Group key A] + [Brightness+ key] for 5 seconds. The light will flash before starting the distribution network.
- Quiet Night Scene: Dedicated button for a low-light setting.
6.3 Wall Switch Usage
- If the APP's 'Do Not Disturb' mode is active, the light will not automatically turn on when powered on after a power outage.
- Quickly toggle the wall switch ON and OFF once (with a closing time of less than 1 second) to cycle through the following 4 scene modes: NoonSun, White Cloud, Food Yellow, Dormitive.
6.4 Smart Speaker Control
The light supports voice control via smart speakers compatible with Tuya (Graffiti smart speakers), Tmall Genie, Xiaodu, Xiaoai, Google Home, Amazon Alexa, and IFTTT.
- Bind your Tuya (Graffiti) app account within your smart speaker's app.
- Use voice commands to turn the light on/off, adjust brightness, and change color temperature.
6.5 Advanced Lighting Features
- Transitional Color Temperature Switching: The light features smooth, gradient transitions between color temperatures and brightness levels, avoiding sudden changes that can cause eye discomfort. This provides a more natural and comfortable visual experience, especially beneficial for the elderly, children, and those spending long hours indoors.
- 24H Natural Light Simulation: Experience a full 24-hour cycle of natural daylight (3000K-16700K) in your space, adapting to different activities like sleep, exercise, work, relaxation, study, and cooking.
- High Color Rendering Index (RA97): With a CRI of RA97, the light restores the true colors of objects, enhancing visual accuracy and vibrancy.
7. Maintenance
- Cleaning: Ensure the power is off before cleaning. Wipe the light fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- IP40 Protection: The light is designed with IP40 protection, making it dust-proof, insect-proof, and moisture-resistant, which helps maintain its appearance and functionality over time.
8. Troubleshooting
- Light not turning on: Check power supply, wall switch, and circuit breaker. Ensure the light is properly installed.
- Cannot connect to Tuya APP:
- Verify your WiFi network is 2.4G Hz. 5G WiFi is not supported.
- Ensure 2.4G and 5G SSIDs have different names.
- Confirm the light is in network configuration mode (alternating blue and white light). Repeat the 7-toggle or remote button press method if necessary.
- Ensure your mobile device is connected to the 2.4G WiFi network during setup.
- Remote control not working: Check battery. Re-pair the remote control with the light as described in section 6.2.
- Voice control not responding: Ensure your Tuya account is correctly linked to your smart speaker app (Alexa, Google Assistant, etc.). Check internet connection for both the light and the smart speaker.
9. User Tips
- For optimal smart home integration, ensure your 2.4GHz Wi-Fi network is stable and has good coverage in the area where the light is installed.
- Experiment with the various scene modes and the 24-hour natural light simulation to find settings that best suit your daily routine and mood.
- Utilize the 'Do Not Disturb' mode via the Tuya APP if you experience frequent power fluctuations to prevent unexpected light activation.
10. Warranty and Support
This BENEWTON Smart Ceiling Light comes with a 1-year warranty from the date of purchase. For warranty claims or technical support, please contact your retailer or the manufacturer directly.
For a more detailed user manual in PDF format, you can refer to the official document: User Manual (PDF).