Introduction
Thank you for purchasing the Electric Infrared Cabinet Space Heater GD9315BCW-4J. This manual provides important information for the proper assembly, operation, and maintenance of your heater. Please read it thoroughly before use and keep it for future reference.
Safety Information
WARNING: To reduce the risk of fire, electric shock, or injury, read and understand all instructions before using this heater.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater, and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
- Do not use outdoors.
- To disconnect heater, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This heater includes a Tip Over Safety Switch which automatically turns off the heater if it is accidentally tipped over.
- The heater is equipped with a Child Lock feature to prevent unintended operation.
Package Contents
Upon opening the package, please ensure all items are present and undamaged:
- Electric Infrared Cabinet Space Heater GD9315BCW-4J
- Remote Control
- Power Cord
- Casters (for assembly)
- User Manual (this document)
Setup
The GD9315BCW-4J heater requires minimal assembly, primarily attaching the casters for portability.
- Unpacking: Carefully remove the heater and all components from the packaging. Retain packaging for storage or return if necessary.
- Caster Assembly: Turn the heater upside down on a soft, protected surface to avoid scratching the cabinet. Locate the pre-drilled holes on the bottom corners. Insert the caster stems into these holes and push firmly until they click into place. Ensure all casters are securely attached.
- Placement: Place the heater on a firm, level surface. Ensure there is at least 3 feet (0.9 m) of clear space around the heater from any combustible materials. Do not place the heater directly below a power outlet.
- Power Connection: Ensure the heater is turned OFF. Plug the power cord directly into a grounded 120V AC, 60Hz electrical outlet. Do not use an extension cord.
Operating Instructions
The heater can be operated using the control panel on the unit or the included remote control.
Control Panel & Remote Functions:
- ON/OFF Button: Press to turn the heater on or off.
- Mode Button: Cycles through different operating modes (e.g., High, Low, ECO).
- High/Low Buttons: Selects between high and low heat settings.
- ECO Mode: Activates energy-saving mode.
- Timer Button: Sets the automatic shut-off timer. Use the Up/Down arrows to adjust the duration.
- Up/Down Arrows: Adjust temperature settings or timer duration.
- Digital LED Display: Shows current temperature, timer settings, and operating mode.
- Thermostat Control: The heater features a thermostat to maintain a desired room temperature. Set your preferred temperature using the Up/Down arrows.
- Child Lock: Activate this feature to prevent accidental changes to settings. Refer to the specific instructions on the remote or control panel for activation/deactivation.
Initial Operation:
- Plug in the heater.
- Press the ON/OFF button. The digital display will illuminate.
- Use the Mode button or High/Low buttons to select your desired heat output.
- Adjust the thermostat to your preferred temperature using the Up/Down arrows.
- (Optional) Set the timer for automatic shut-off.
Product Demonstration Video:
Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
- Cleaning: Always unplug the heater before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents. Ensure no water enters the heater.
- Air Intake/Exhaust: Periodically check the air intake and exhaust vents for dust and debris. Use a vacuum cleaner with a brush attachment to gently clean these areas. Blocked vents can lead to overheating.
- Storage: If storing the heater for an extended period, unplug it and allow it to cool completely. Store it in a cool, dry place, preferably in its original packaging.
- Cord Care: Regularly inspect the power cord for any signs of damage. Do not use the heater if the cord is frayed or damaged.
Troubleshooting
If your heater is not operating correctly, please check the following common issues before contacting support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | Not plugged in; power switch off; tripped circuit breaker; tip-over switch activated. | Ensure plug is fully inserted; turn ON/OFF switch; reset circuit breaker; place heater upright on a level surface. |
| No heat output. | Temperature setting too low; ECO mode active; heating elements faulty. | Increase temperature setting; switch to High/Low mode; contact support if elements are suspected faulty. |
| Heater turns off unexpectedly. | Overheating safety feature activated; tip-over switch activated; timer expired. | Unplug and let cool for 30 minutes, check for obstructions; place heater upright; check timer settings. |
| Remote control not working. | Dead batteries; obstruction between remote and heater; remote not aimed correctly. | Replace batteries; remove obstructions; aim remote directly at the heater's sensor. |
Specifications
| Attribute | Detail |
|---|---|
| Model Number | GD9315BCW-4J |
| Product Name | Cabinet Infrared Heater |
| Heating Element | 4 Infrared Tubes |
| Heat Settings | High / Low |
| Control Features | Digital LED Display, Remote Control, Program On/Off Switch |
| Thermostat Control | Yes |
| Safety Features | Tip Over Safety Switch, Child Lock |
| Timer | Yes |
| Power Source | Electric |
| Application | Hotel, Household |
| Installation Method | Assembly (Casters) |
| Origin | Mainland China (Zhejiang) |
| Product Weight | 5.0 kg |
| Product Dimensions (H x W x D) | Approx. 400mm x 300mm x 350mm |
User Tips
Based on common user experiences, here are some tips for optimal use:
- Optimal Placement: For best results, place the heater in the center of the room or near an interior wall. Avoid placing it directly in front of windows or doors where heat can easily escape.
- Thermostat Use: Utilize the thermostat control to set your desired room temperature. The heater will cycle on and off to maintain this temperature, saving energy.
- ECO Mode: Experiment with ECO mode for energy efficiency. This mode often adjusts heating power to maintain a comfortable temperature with less energy consumption.
- Child Lock: If you have children or pets, remember to activate the child lock feature to prevent accidental changes to settings or turning the unit on/off.
Warranty and Support
For any questions, technical assistance, or warranty claims, please contact the seller directly. Keep your purchase receipt as proof of purchase.
The seller can be reached via:
- E-Mail: 22900475@qq.com
- WhatsApp: +86 18684677532
