MINISFORUM BD795i SE

Contents

MINISFORUM BD795i SE Motherboard User Manual

Model: BD795i SE

Brand: MINISFORUM

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your MINISFORUM BD795i SE Motherboard. Please read this manual thoroughly before using the product to ensure proper setup and optimal performance.

Video: MINISFORUM BD795i SE Motherboard Overview. This video highlights key features and components of the motherboard.

Package Contents

Verify that all items are present in your package. If any items are missing or damaged, please contact customer support.

  • Rear I/O Panel Shield
  • Fan Brackets
  • Mounting Screw Set
  • User Manual (This document, also available as PDF: Download PDF)
MINISFORUM BD795i SE Motherboard with AMD Ryzen 9 7945HX

Image: The MINISFORUM BD795i SE Motherboard, featuring the AMD Ryzen 9 7945HX processor.

Motherboard Layout

The following diagram illustrates the main components and connectors on the BD795i SE motherboard.

Motherboard Layout Diagram showing PCIe slots, M.2 slots, SODIMM slots, and various headers

Diagram: Motherboard layout with key components labeled.

Key Components

  1. USB3.2 Gen1 Header (01): Connects to additional USB3.2 Gen1 ports, offering data transfer speeds up to 5 Gb/s.
  2. System Panel Headers (02): Supports various chassis-mounted functions including power LED, HDD activity LED, power switch, and reset switch.
  3. Fan Headers (03): Includes CPU_FAN, SYS_FAN1, and SYS_FAN2 for connecting cooling fans. Each supports 1A current and 12W power.
  4. 8-pin CPU Power (04): Connects to the power supply for CPU power.
  5. Front Panel Audio Header (05): For chassis-mounted front panel audio I/O modules supporting HD Audio.
  6. M.2 Slots (06): Two M.2 2280 NVME SSD slots supporting PCIe 4.0 x4 mode M Key design.
  7. SODIMM Slots (07): Two DDR5 SODIMM slots for memory modules.
  8. PCIe Expansion Slots (08): One PCIe 5.0 x16 slot for full-speed graphics cards and other expansion cards.
  9. 24-pin MB Power (04): Connects to the power supply for motherboard power.

Interfaces

The BD795i SE motherboard offers a rich set of I/O interfaces for various peripherals.

Rich I/O interfaces including HDMI, DisplayPort, USB-C, USB-A, LAN, and audio jacks

Image: Detailed view of the motherboard's rich I/O interfaces.

Rear I/O Ports

  • Audio Input (Line In): Used to collect audio signals from external audio equipment.
  • Audio Output (Line Out): Connects to power amplifiers or headphones.
  • Microphone (MIC): For recording audio via the Mini PC's microphone jack.
  • RJ-45 LAN Port: 2.5G LAN network interface for standard Ethernet cables and local area network connection.
  • Reset Hole: Press and hold for ten seconds to restore BIOS to factory defaults.
  • USB3.2 Gen2 Type-C Port: Provides a transfer rate of up to 10 Gbps.
  • USB3.2 Gen1 Type-A Ports (x2): For connecting USB 3.2 Gen1 devices.
  • USB2.0 Type-A Ports (x2): Compatible with USB 2.0 or USB 1.1 devices like keyboards and printers.
  • HDMI Port: High-Definition Multimedia Interface for uncompressed, fully digital audio/video output (up to HDMI2.1).
  • DisplayPort: Supports display output at 4K@60Hz, including HD audio signal transmission (up to DP1.4).

Setup and Installation

Installing Memory (SODIMM)

This motherboard supports two DDR5 SODIMM modules.

  1. Locate the two SODIMM slots on the motherboard.
  2. Align the notch on the DDR5 SODIMM module with the notch in the slot.
  3. Insert the module at a 45-degree angle and push down until the clips on both sides lock into place.
  4. Important: DDR5 memory modules are notched differently from DDR, DDR2, DDR3, or DDR4 modules. Do NOT install incorrect memory types into the DDR5 slots.
MINISFORUM BD795i SE Specifications table

Image: Specifications table for the BD795i SE, including memory type.

Installing M.2 SSDs

The motherboard features two M.2 2280 NVME SSD slots (PCIe 4.0 x4).

  1. Locate the M.2 slots.
  2. Insert the M.2 SSD module into the slot at an angle.
  3. Gently push down the module and secure it with the provided screw.

Installing PCIe Expansion Cards

The motherboard has one PCIe 5.0 x16 slot.

  1. Warning: Unplug the power cord before adding or removing PCIe expansion cards.
  2. Align the expansion card with the PCIe slot.
  3. Press firmly until the card is seated correctly.
  4. Secure the card with a screw to the chassis.

Connecting Power

Connect the 24-pin ATX power connector and the 8-pin CPU power connector from your power supply to the corresponding ports on the motherboard. Ensure the connectors are oriented correctly.

Connecting Front Panel Headers

Connect the cables from your chassis's front panel (power button, reset button, power LED, HDD LED, front audio) to the corresponding headers on the motherboard as indicated in the Motherboard Layout diagram.

Operating Instructions

Initial Power On

After all components are installed and connected, press the power button on your PC case. The system should boot up.

BIOS Settings

To enter the BIOS setup, press the designated key (usually DEL or F2) during startup. Here you can configure various system settings, including boot order, fan speeds, and overclocking options.

Outstanding cooling system with customized CPU cooler and airflow diagram

Image: Diagram illustrating the customized CPU cooler and airflow for the BD795i SE, supporting 12025 12cm fans.

Maintenance

Cooling System

The BD795i SE features an outstanding cooling system with a customized CPU cooler. Ensure proper airflow within your PC case. Regularly clean dust from fans and heatsinks to maintain optimal cooling performance.

General Care

Keep the motherboard and connected components in a clean, dry environment. Avoid exposing the system to extreme temperatures or humidity.

Troubleshooting

System Reset

If you encounter system instability or boot issues, you can try resetting the BIOS to factory defaults.

  1. Disconnect the power supply from the motherboard.
  2. Locate the "Reset Hole" on the rear I/O panel.
  3. Using a thin, non-conductive object (like a paperclip), press and hold the reset button inside the hole for ten seconds.
  4. Reconnect power and attempt to boot the system.

Specifications

Below are the detailed specifications for the MINISFORUM BD795i SE Motherboard.

MINISFORUM BD795i SE Specifications table

Image: Comprehensive specifications for the BD795i SE motherboard.

MINISFORUM BD795i SE Specifications
Feature Description
CPU AMD Ryzen 9 7945HX (16C/32T, 64M Cache, up to 5.4GHz)
GPU AMD Radeon 610M
Memory DDR5 Dual Channels (SODIMM slot x 2, up to 5200MT/s, Max 64GB)
Storage 2x M.2 2280 PCIe4.0 SSD Slot
Expansion Slot 1x PCIe5.0 x16 slot
Ethernet RJ45 2.5G Lan Port
Video Output 1x HDMI2.1, 1x DP1.4, 1x USB-C
Audio Output 1x Line Out
USB Ports 1x USB3.2 Gen2 Type-C (Alt DP), 2x USB3.2 Gen1 Type-A Port, 2x USB2.0 Type-A Port
I/O Ports 1x 4-pin CPU Fan header, 2x 4-pin System Fan header, 1x 4-pin SSD Fan header, 1x USB 3.2 Gen 1 header, 1x Front Panel Audio header, 1x System Panel header
Form Factor Mini-ITX Form Factor (170x170mmx1.6mm)
TDP 100W
Geekbench 6 performance comparison for AMD Ryzen processors

Image: Performance benchmarks (Geekbench 6) comparing the AMD Ryzen 9 7945HX with other Ryzen processors.

User Tips

  • SATA 3 Compatibility: While the specifications primarily highlight M.2 NVMe SSDs, if you plan to use SATA 3 devices, ensure your case and power supply provide the necessary connections.
  • BIOS Reset: If you encounter issues after making changes or installing new hardware, remember the reset hole on the rear I/O panel can revert BIOS settings to default.
  • Fan Control: The BIOS allows for adjustment of CPU and chassis fan speeds, which can be useful for optimizing noise levels and cooling performance.

Support and Contact Information

For technical assistance or further inquiries, please contact MINISFORUM support.

  • Manufacturer: Micro Computer (HK) Tech Limited
  • Website: https://www.miniscloud.com
  • Online Technical Support: https://www.minisforum.com/new/support
  • Email: support@minisforum.com
  • Telephone (China): 0755-84659450
  • Telephone (Support): 400-090-9901
  • Address: FLAT/RM 18, 28/F, Shui On Centre, 6-8 Harbour Road, Waterfront Wan Chai, Hong Kong

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.