1. Introduction
The RAGEER Adjustable GPU Graphics Card Holder Bracket is designed to provide stable and firm support for your graphics card, preventing sag and ensuring optimal performance and longevity. This bracket is compatible with various ITX/ATX desktop PC cases and offers millimeter-level height adjustment to suit different graphics card sizes.
Figure 1: RAGEER Graphics Card Support Bracket (Black and White versions) with key features: Load-Bearing 10kg, Min 6mm, Max 96mm height adjustment.
2. Safety Information
Please read and understand the following safety precautions before installation:
- Always power off your computer and unplug it from the power source before installing any internal components.
- Discharge any static electricity from your body by touching a grounded metal object (e.g., your PC case) before handling components.
- Handle the graphics card and bracket with care to avoid damage.
- Keep small parts and screws away from children.
3. Package Contents
Verify that all items are present in your package:
- 1 x RAGEER Graphics Card Support Bracket (GH-696H or GH-696B)
- Mounting Screws (various sizes for compatibility)
- 1 x Sponge Pad (pre-attached or separate for protection)
4. Specifications
| Feature | Detail |
|---|---|
| Brand Name | RAGEER |
| Model Number | GH-696H or GH-696B |
| Type | CPU Holder (Graphics Card Holder) |
| Material | Metal |
| Load Capacity | Up to 10kg |
| Adjustable Height Range | 6mm - 96mm |
| Dimensions (Approx.) | Base: 40mm/1.6inch, Vertical support: 84mm/3.3inch, Top arm: 25mm/1inch |
| Fixing Method | Double screw fixing |
| Protection | Sponge pad |
Figure 2: Detailed dimensions of the RAGEER Graphics Card Support Bracket.
5. Setup and Installation
Follow these steps to install your RAGEER Graphics Card Holder Bracket:
-
Step 1: Locate Screw Holes
Identify the appropriate screw holes for the fan beneath your graphics card. The bracket is designed to be mounted to existing fan screw points in your PC case.
Figure 3: Locating the fan screw holes for bracket installation.
-
Step 2: Secure the Bracket
Position the bracket and secure it to the fan using the provided long screws. Ensure the bracket is aligned correctly and does not interfere with fan operation.
Figure 4: Securing the bracket to the case fan, ensuring no interference.
-
Step 3: Tighten Screws
Once positioned, tighten the screws firmly to ensure the bracket is stable and secure. The double screw fixing mechanism provides enhanced stability.
Figure 5: Tightening the double screws for a stable and firm installation.
-
Step 4: Adjust Height
Adjust the height of the support arm to match the bottom edge of your graphics card. The bracket offers millimeter-level adjustment for a precise fit. Ensure the sponge pad makes gentle contact with the graphics card to provide protection and support.
Figure 6: Adjusting the bracket height to support the graphics card.
6. Operation
The RAGEER Graphics Card Holder Bracket is designed for set-and-forget operation. Once installed and adjusted, it continuously provides anti-sag support. If you change your graphics card or modify your PC build, you may need to readjust the bracket's height.
Height Adjustment:
To adjust the height, loosen the screws on the vertical support column, slide the support arm to the desired height (between 6mm and 96mm), and then re-tighten the screws firmly. The millimeter-level adjustment allows for precise positioning to perfectly support your GPU.
Figure 7: Millimeter-level adjustment for precise graphics card support.
7. Maintenance
- Cleaning: Periodically wipe the bracket with a soft, dry cloth to remove dust. Avoid using harsh chemicals or abrasive materials.
- Inspection: Occasionally check the mounting screws to ensure they remain tight. Over time, vibrations can cause screws to loosen.
- Sponge Pad: Ensure the sponge pad is intact and providing adequate cushioning to your graphics card.
8. Troubleshooting
- Bracket feels unstable: Ensure all mounting screws are tightened securely. The double screw fixing is designed for maximum stability. Re-check the fan screw holes for proper engagement.
- Difficulty adjusting height: Loosen the adjustment screws sufficiently before attempting to slide the support arm. Do not force the adjustment.
- Interference with other components: Re-evaluate the bracket's position. It is designed to avoid interference with case fans. If interference occurs, try adjusting its horizontal placement slightly or ensure the graphics card is seated correctly.
9. User Tips
- Users appreciate the solid metal construction, which provides reliable anti-sag support.
- The inclusion of different sets of screws in the package can be very helpful for compatibility with various PC cases and fan types.
- Take your time during installation to ensure precise height adjustment for optimal GPU support.
10. Warranty and Support
For detailed warranty information, technical support, or further assistance, please refer to the official product documentation or contact RAGEER customer service. A comprehensive user manual in PDF format is available for download: