Pictrey M2

Contents

Pictrey M2 Dash Cam User Manual

Model: M2

Brand: Pictrey

1. Product Introduction

This section provides an overview of the Pictrey M2 Dash Cam, including its appearance, indicator guide, and specifications.

1.1 Appearance

The Pictrey M2 Dash Cam features a compact design with a 330° rotating lens. Key components include the lens, microphone (MIC), speaker, Micro-USB port, memory card slot, and reset hole.

Pictrey M2 Dash Cam front and back view with labels for components like lens, microphone, speaker, Micro-USB, memory card slot, and reset hole.

Figure 1: Pictrey M2 Dash Cam Components

1.2 Indicator Guide

The indicator light on the dash cam provides visual cues about its current status:

Indicator System Status
Flashes Blue Slowly Recording
Flashes Red Slowly Parking Monitoring
Solid Red Upgrading/Malfunction
Flashes Red Quickly Abnormal Storage

1.3 Specifications

The following table details the technical specifications of the Pictrey M2 Dash Cam:

Feature Specification
Model M2
Input 5V=2A
Storage Supports Micro-SD card with a maximum capacity of 256GB and rating of U3 (UHS-3) or above.
Camera Resolution 2K (2560x1440)
Aperture F2.0
Field of View (FOV) 121°
Wi-Fi 2.4GHz
Power Interface Micro USB
Working Temperature -4°F to 158°F (-20°C to 70°C)
Storage Temperature -40°F to 185°F (-40°C to 85°C)
Loop-Cycle Recording Feature Yes
Built-in Screen No
Rear Camera None
Is Batteries Included No
Number Of Lenses 1
Chipset Manufacturer HISILICON
Frames Per Second 30
Certification CE

2. Setup

This section guides you through the initial setup of your Pictrey M2 Dash Cam.

2.1 Unboxing and Package Contents

The Pictrey M2 Dash Cam comes with essential accessories for installation and operation. Please check the contents upon unboxing.

Video 1: Pictrey M2 Dash Cam Unboxing and Overview

Diagram showing Pictrey M2 Dash Cam and its accessories: Car Charger, Pry Tool, 3.5m Power Cable, 3M Adhesive, Static Stickers, User Manual.

Figure 2: Package Contents

Photo of the Pictrey M2 Dash Cam, power cable, and pry tool unboxed.

Figure 3: Unboxed Items

2.2 Memory Card Installation

A Micro-SD card (not included) is required for recording. Please ensure the dash cam is not powered on before installation.

  1. Insert the memory card halfway into the slot.
  2. Use a fingernail or paper clip to push the card all the way inward until it clicks and locks in place.

To remove the memory card, gently push its edge inward until it clicks and pops out, then pull it out.

Diagram showing how to insert a Micro-SD card into the dash cam's memory card slot.

Figure 4: Memory Card Installation

Note: Please use a branded Micro-SD card with a capacity of up to 256GB and a rating of U3 (UHS-3) or above. Format the memory card before first use to prevent errors. Do not remove the memory card while the Dash Cam is turned on.

2.3 Dash Cam Installation

The Pictrey M2 Dash Cam can be powered via the cigarette lighter or an intelligent hardwire kit (sold separately).

Cigarette Lighter Power Supply

  1. Wipe the front windshield: Ensure the installation area is clean and dry for firm adhesion.
  2. Power on the Dash Cam: Connect the car charger to the cigarette lighter and the Dash Cam using the provided Type-C power cord. The dash cam will automatically start when the car is powered on.
  3. Determine the installation position and adjust the lens angle:
    • Connect to the DDPAI App (see Section 3). In the app, navigate to "Device" > "Add a device" > "Enter Device" to access the preview interface.
    • Position the dash cam in the middle of the front windshield. Use the horizontal and vertical center lines in the app's preview to align the dash cam. The center line of the car's front should align with the vertical center line, and the disappearing line of the ground plane should align with the horizontal center line.
Diagram showing the correct positioning of the dash cam on the windshield using horizon and center lines for alignment.

Figure 5: Lens Angle Adjustment Guide

Note: Correct positioning based on the horizon and vertical center lines is crucial for optimal dash cam function.

  1. Stabilize the Dash Cam:
    • Attach the electrostatic sticker to the chosen installation position on the windshield.
    • Peel off the film from the 3M sticker on the bracket and firmly attach the bracket to the center of the electrostatic sticker.
Diagram illustrating how to attach the dash cam bracket to the windshield using an electrostatic sticker and 3M adhesive.

Figure 6: Dash Cam Mounting

Note: The 3M sticker is disposable. Confirm the recording angle is correct before permanent attachment.

  1. Wiring: Route the power cord from the cigarette lighter receptacle to the dash cam, tucking it into the car's plastic guard plate using a pry tool.
Diagram showing the recommended routing of the power cable along the car's interior trim.

Figure 7: Power Cable Routing

Note: The cigarette lighter receptacle's position may vary by car model. This figure is for reference only.

Connect the Fuse Box (Intelligent Hardwire Kit is Required)

This method provides a cleaner installation and enables parking monitoring. However, it is more complex and should ideally be performed by a professional at an automobile service shop to avoid vehicle damage.

Note: The intelligent hardwire kit needs to be purchased separately or as part of a package including the step-down cable.

3. Operating

This section details how to connect your dash cam to the app and use its various functions.

3.1 App Connection

The Pictrey M2 Dash Cam is powered by DDPAI technology and uses the DDPAI App for control and viewing. Product images and interface screenshots in this manual are for illustrative purposes only. The actual device and software may vary due to ongoing updates and improvements.

Downloading the App

Search for "DDPai" in the Google Play Store (Android) or App Store (iOS) to download the DDPAI App, or scan the QR code below:

QR code for downloading the DDPAI App.

Figure 8: DDPAI App QR Code

Wi-Fi Connection

  1. Launch the DDPAI App.
  2. Go to the "Device" page and tap "+ Add a device".
  3. Select "Device without screen" from the "Choose your device" interface.
  4. Tap "Next" then "Connect to Wi-Fi". The app will display available Wi-Fi networks from the Dash Cam.
  5. For iPhone users: In your phone's Wi-Fi settings, select "pictrey_M2_XXXX", enter the initial password (1234567890), and tap "Join".
  6. For Android users: In the Wi-Fi list, select "pictrey_M2_XXXX", enter the initial password (1234567890), and tap "Connect".

Note: The default Wi-Fi password is 1234567890. You can change it later in the app settings.

3.2 Video Function

Preview Video

After successfully connecting the app to the Dash Cam, enter the real-time preview interface. Tap the landscape preview icon or rotate your phone horizontally (with auto-rotate enabled) to switch to full-screen preview mode.

Note: The preview quality is lower than the recorded HD quality. Download videos for full HD viewing.

Playback Video

  1. In the real-time preview interface, drag the progress bar to select a starting point.
  2. Tap the thumbnail or wait 5 seconds for the recorded video to start playing.

Different colors on the time progress bar indicate different video types:

Color-coded timeline Description
Video triggered by an emergency event (e.g., sudden braking or collision).
Video recorded in parking monitoring mode.

Download Video

Method 1:

  1. Drag the progress bar to select the desired video segment.
  2. Tap the download icon to enter the downloading interface.
  3. Tap "Complete" to save the file to your local album.

Method 2:

  1. On the "Device" interface, tap the album icon.
  2. Long-press the video/photo file to enter selection mode.
  3. Select the desired files and tap "Download".

Note: Video lengths range from 5 seconds to 3 minutes.

3.3 Taking Photos

The Dash Cam supports the following photography modes:

  • Collision Sensing Photography: The dash cam automatically takes pictures when it detects a collision or emergency braking.
  • Manual Photographing: Enter the preview interface in the app and tap the camera icon.
  • Voice Photographing: Say "Take photo" to the dash cam's microphone.

Note: Collision sensing and voice photography generate associated videos (default 10 seconds) saved in the "Snap"/"Emergency" tab of the "Device Album".

3.4 Viewing Photos and Videos

View the Device Album

Connect the Dash Cam to your mobile phone via the DDPAI App. Launch the app, tap "Device Album" on the "Device" interface to view captured photos and videos stored on the Dash Cam.

Note: Files in the device album are stored on the recorder's memory card and are not downloaded to your phone until explicitly downloaded.

View the Local Album

Photos and videos downloaded from the dash cam are stored in your phone's local album. Launch the app and tap the "Local Album" tab on the "Device" interface to view these files.

Automatically download snapshot/emergency files: You can enable automatic download of snapshot/emergency files. In the app, go to "Me" > "APP Settings" and toggle on "Automatically download snapshot files" / "Automatically download emergency files".

3.5 Parking Monitoring

With an intelligent hardwire kit (optional), the dash cam can provide 24-hour parking monitoring. After the vehicle is stationary for 15 minutes, the dash cam enters parking mode and records automatically if an abnormal collision is detected. You can set the parking mode and monitoring time via the app.

Screenshot of the DDPAI app showing parking monitoring settings, including options for time-lapse or normal recording.

Figure 9: Parking Monitoring Settings

Parking Mode: Time-lapse video recording

  • After 15 minutes of being stationary, the dash cam switches to time-lapse recording and enters sleep mode after a set duration. Collision wake-up is supported.
  • If a collision occurs during time-lapse recording, the device switches to normal recording and logs the event. Time-lapse recording resumes after 15 minutes of being stationary again.
  • If low voltage is detected, the device powers off and can only be restarted by restarting the vehicle.

Parking Mode: Normal video recording

  • After 15 minutes of being stationary, the dash cam continues normal recording. If a collision occurs, a snapshot (file name starts with "G" and ends with "L") is taken.
  • After the preset duration, the device enters sleep mode.
  • If low voltage is detected, the device powers off and can only be reactivated by starting the vehicle.

Parking Mode: Sleep

  • After 15 minutes of being stationary, the device enters sleep mode. In case of a collision, it switches to normal recording.
  • If the vehicle remains stationary for another 15 minutes, the device re-enters sleep mode.
  • If low voltage is detected, the device powers off and can only be reactivated by starting the vehicle.

Note: Parking monitoring requires the intelligent hardwire kit (optional).

3.6 Collision Detection & Locked Videos

When a collision or sudden braking is detected, the dash cam generates an emergency photo and a related video. These files are stored separately and are not overwritten by the loop recording function.

Setting Camera Sensitivity

The collision sensor sensitivity determines how easily the dash cam triggers recording. Higher sensitivity means easier triggering, lower sensitivity means less frequent triggering. The default is "Medium", with seven levels available: "High", "Medium-high", "Medium", "Medium-low", "Low", "Off", and "Custom".

To adjust: Connect to the DDPAI App, go to "Device" > "Device Settings" > "Adjust collision sensitivity". Select "Driving" or "Parking" and set the appropriate sensitivity.

The default duration for related videos is 10 seconds, with options for 10s, 20s, and 30s. This duration refers to the video segment recorded before and after a collision event.

  • 10s: 5 seconds before and 5 seconds after the event.
  • 20s: 10 seconds before and 10 seconds after the event.
  • 30s: 15 seconds before and 15 seconds after the event.
  • Off: Still generates a 5-second emergency video (2.5 seconds before and 2.5 seconds after).

To adjust: Connect to the DDPAI App, go to "Device" > "Device Settings" > "Duration of related videos during shooting".

3.7 Fatigue Driving Voice Alert

When connected to the app, you can enable the "ADAS Driver Assistance" switch in "Device Settings" to turn fatigue driving alerts on or off. When enabled, voice prompts will remind you to rest or stay alert during long drives.

Screenshot of the DDPAI app showing the ADAS intelligent assistant settings, including a toggle for Fatigue driving.

Figure 10: Fatigue Driving Voice Alert Settings

4. Maintenance

Proper maintenance ensures the longevity and optimal performance of your dash cam.

4.1 Data Transmission

To access recorded files directly from the memory card:

  1. Gently remove the memory card from the dash cam.
  2. Insert it into a card reader and connect the card reader to a computer.
  3. Open the "DCIM" folder to browse or edit photos and video files.

File naming conventions:

  • 200 Video: Includes regular recordings and time-lapse recordings in parking mode. Time-lapse files from the front camera are prefixed with "S."
  • 201 Photo: Includes voice-triggered photos and collision-triggered photos. Front camera snapshots are prefixed with "N," while collision-triggered photos are prefixed with "G."

4.2 Firmware Upgrade

To ensure your dash cam has the latest features and improvements:

  1. Open the DDPAI App and connect to the Dash Cam's Wi-Fi.
  2. Tap "Me" > "About DDPAI" > "Check version".
  3. The app will automatically detect if new firmware is available. Follow the on-screen instructions to upgrade.

Note: Do not cut off power during the upgrade process to avoid damage. If an upgrade fails due to power loss, contact customer service or manually copy the upgrade package to the device's DCIM folder.

4.3 Safety Precautions

  • Do not operate the Dash Cam or watch videos on your phone while driving. Prioritize driving safety.
  • Do not install the Dash Cam in a location that obstructs your driving view.
  • Use only the power cord included in the product package. Other power cords may cause fire, short circuits, or electric shocks.
  • Use a branded Micro-SD card (up to 256GB). Do not insert or remove the memory card while the Dash Cam is in use. Format it via the app before first use and regularly thereafter.
  • Do not open the Dash Cam shell or attempt repairs yourself. Contact official customer service for product malfunctions.
  • If using a power adapter for power supply, ensure it meets standard requirements.

5. Troubleshooting (FAQ)

This section addresses common questions and issues you might encounter.

  1. How do I format a memory card?
    • Method 1 (via App): Connect your phone to the Dash Cam via Wi-Fi, enter "Camera Settings" > "Storage Management", and select to format the memory card.
    • Method 2 (via Computer): Remove the memory card, insert it into a card reader, connect to a computer, find the memory card drive, right-click, and select "Format".
  2. How to export driving video from the memory card?

    Use a card reader to connect the memory card to a computer, then you can export the driving video files.

  3. What is the Wi-Fi password of the Dash Cam?

    The default Wi-Fi password is "1234567890". You can change it in "Camera Settings" > "Set WIFI Password" in the app.

  4. Can I change the Wi-Fi password of the Dash Cam?

    Yes. Connect the Dash Cam to your phone, go to "Device Settings" > "Device Wi-Fi Password", enter a new password, confirm, and save.

  5. How do I reset the Dash Cam?

    If the device malfunctions, insert an eject pin into the RESET hole and hold for 6 seconds. It will power on automatically after reset.

  6. What if I forget the Wi-Fi password?

    Press the function button for approximately 6 seconds to reset the device. The Wi-Fi password will revert to the default (1234567890). Then reconnect the Dash Cam.

  7. Can I turn off the voice control function if it's often triggered by mistake?

    Yes. Connect your phone to the Dash Cam, go to the "Device" page, tap "Device Settings", and disable the "Local Voice Control" function.

  8. Why does the product feel very hot during use?

    It is normal for electronic products to heat up during use. All Pictrey products undergo high-temperature testing. Normal heating due to heat dissipation will not affect normal operation or cause safety issues.

6. User Tips

  • Micro SD Card: Remember to purchase a Micro SD card separately, as it is not included. A Class 10, U3 (UHS-3) card up to 256GB is recommended for optimal performance.
  • App Usage: While the app is user-friendly, avoid using your phone for dash cam operations while driving to maintain focus on the road.
  • Video Clarity: The 2K resolution provides clear footage for nearby vehicles. However, license plates of cars more than 10 meters away may be difficult to discern.
  • Voice Features: The dash cam supports voice photographing and fatigue driving alerts. Ensure these are configured to your preference in the app.
  • Power Source: The dash cam can be powered by the car's cigarette lighter or a portable power bank, offering flexibility for use even outside the vehicle.

7. Warranty and Support

The Pictrey M2 Dash Cam comes with a 1-year warranty.

For any product malfunctions or issues, please contact official customer service for relevant consultation. Do not attempt to open the dash cam shell or repair it yourself, as this may void the warranty and cause further damage.

© 2023 Pictrey. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.