1. Introduction
This manual provides detailed instructions for the installation and operation of your Bonroad Wireless CarPlay Android Auto Interface. This device integrates advanced smartphone connectivity into your Audi MMI 3G system, enhancing your driving experience with features like navigation, music, and hands-free communication.

1.1 Functional Statement
The Bonroad interface offers a range of functionalities to upgrade your in-car entertainment and connectivity:
- CarPlay / Android Auto: Seamlessly integrates your iPhone or Android device. Supports both wireless and wired connections, allowing for voice commands, navigation, music playback, and hands-free calls. Utilize Siri voice interaction for information and control.
- Reversing Video Input: The smart module can decode video signals, enabling compatibility with factory reverse cameras, parking radar, aftermarket cameras, and 360-degree camera systems.
- Mirroring: Supports both wired and wireless screen mirroring functions for iPhone (AirPlay) and Android phones (Autolink).
- USB Video Playback: Features automatic media playback. Simply insert a U disk to play video and audio media directly.


2. Specifications
2.1 Compatible Car Models
This interface is designed for Audi vehicles equipped with the MMI 3G system (Round LVDS) and specific screen sizes. Please verify your car's compatibility before installation.
| Model | Original Screen Size | Year |
|---|---|---|
| Audi A4/A5/Q5/S4/S5 | 6.5" | 2009-2011 |
| Audi A4/A5/S5 | 6.5"~7" | 2012-2015 |
| Audi Q5 | 6.5"~7" | 2012-2018 |
| Audi A6L/A7 | 8" (stretch screen) | 2012-2015 |

2.2 Product Dimensions and Weight
- Length: 26 cm
- Width: 20 cm
- Height: 7 cm
- Weight: 0.859 kg
3. Kit Contents
The package includes the following components:
- CarPlay decoder box
- Power cable harness
- LVDS cable
- WiFi antenna
- USB-AV cable
- Gateway cable

4. Setup and Installation
4.1 Pre-installation Check
Before proceeding with the installation, it is crucial to confirm that your Audi multimedia system is an MMI 3G system with a Round LVDS port. If you are unsure, please consult a professional.

4.2 Toggle Switch Setup (DIP Switches)
The CarPlay decoder box features toggle (DIP) switches that must be configured according to your car's screen size. The switches are located on the side of the decoder box, near the LVDS port.
Setting Instructions:
- For 6.5 inch screen (400x240 resolution): Switches 1, 2, 3, 4, 5, 6, 7, 8 should be set as follows: OFF, ON, ON, ON, ON, ON, ON, ON. (Visually, switch 1 is OFF, and switches 2-8 are ON).
- For 6.5 / 7 inch screen (800x480 resolution): Switches 1, 2, 3, 4, 5, 6, 7, 8 should be set as follows: ON, OFF, ON, ON, ON, ON, ON, ON. (Visually, switch 1 is ON, switch 2 is OFF, and switches 3-8 are ON).
(Note: Specific images illustrating the DIP switch settings are not available in the provided media. Please refer to the physical product for exact switch locations and markings.)
4.3 Cable Connection Chart
Carefully follow the wiring diagrams for proper installation. Incorrect connections can lead to malfunction.
4.3.1 Transfer Gateway Connection
This diagram illustrates the connections for the transfer gateway. Key connections include:
- Original power cable to the new power cable.
- MIC IN and MIC OUT connections.
- GND, 12V Reverse Camera out, 12V ACC out, Back/Reverse Detect, 12V input reverse Detect, Front camera video input.
- USB Port for connecting USB flash drives/mobile phones.
- WiFi antenna connection (ensure it's away from metal).
- New LVDS cables connecting to the original LVDS cable and the screen.
- The transfer gateway itself connects to the OEM CD host and the new gateway cable.
The transfer gateway location varies by Audi model:
- A1/Q3: From driver seat
- 10-11A6L: From passenger seat
- 10-15Q7: From driver seat
- A4L/Q5 (HIGH): From passenger seat
(Note: A detailed wiring diagram for the transfer gateway is not available in the provided media. Please refer to the PDF user manual for the complete diagram.)
4.3.2 Transfer CAN from Air Condition Panel
This diagram shows how to connect the CAN bus from the air condition panel. Important connections include:
- Connections similar to the transfer gateway for power, MIC, camera inputs, USB, and WiFi antenna.
- New air condition CAN cable and original air condition CAN cable connecting to the main unit.
CAN transfer location by Audi model:
- A8L/D4: From air condition panel
- 12-15 A6L: From air condition panel
(Note: A detailed wiring diagram for the CAN transfer is not available in the provided media. Please refer to the PDF user manual for the complete diagram.)
4.3.3 WiFi Antenna and USB-AV Cable Connection
Connect the WiFi antenna to the designated port on the decoder box. Ensure the antenna is positioned away from metal obstructions for optimal signal. Connect the USB-AV cable to the decoder box for USB media playback and auxiliary video input.
(Note: A detailed diagram for WiFi antenna and USB-AV cable connection is not available in the provided media. Please refer to the physical product and PDF user manual.)
4.4 Decoder Box Placement
The CarPlay interface decoder box should be installed in an appropriate space near or on the OEM head unit. Ensure it is secured and does not interfere with other components or vehicle operation.
(Note: Images illustrating decoder box placement on or beside the OEM head unit are not available in the provided media. Please refer to the PDF user manual for visual guidance.)
4.5 Switching Between Interfaces
After all cables are connected, you can switch between the original MMI 3G interface and the CarPlay/Android Auto interface by long-pressing the "RETURN" button on your Audi's central control panel.
(Note: An image highlighting the "RETURN" button is not available in the provided media. Locate the "RETURN" button on your Audi's MMI control panel.)
5. Operating Instructions
5.1 Wireless CarPlay Connection Method
- On the interface's "SmartPhone Setting" menu, select "Bluetooth".
- Check the Bluetooth device name, which should start with "CAR-xxxx".
- On your iPhone, go to Settings > Wi-Fi and ensure Wi-Fi is turned ON. Then, go to Settings > Bluetooth.
- In the Bluetooth device list, select the device name starting with "CAR-xxxx". A pairing request window will pop up. Confirm the pairing.
- Once paired, select "Use CarPlay" to establish the connection.
(Note: Screenshots for Wireless CarPlay connection steps are not available in the provided media. Follow the on-screen prompts.)
5.2 Apple Wireless Screen Mirroring (AirPlay)
- On the interface's "SmartPhone Setting" menu, select "AirPlay".
- On your iPhone, go to Wi-Fi settings and connect to the Wi-Fi network named "CAR-WIFI-XXX". The default password is 66668888.
- After a successful Wi-Fi connection, return to your iPhone's main screen. Swipe down from the top-right corner (or up from the bottom for older models) to open the Control Center.
- Tap on "Screen Mirroring" and then select "AirPlay" from the list of available devices to begin mirroring.
(Note: Screenshots for Apple Wireless Screen Mirroring steps are not available in the provided media. Follow the on-screen prompts.)
5.3 Wireless Android Auto Connection Method
- On the interface's "SmartPhone Setting" menu, select "Bluetooth".
- Check the Bluetooth device name, which should start with "CAR-xxxx".
- On your Android phone, go to Bluetooth settings.
- Select the Bluetooth device name starting with "CAR-xxxx". A pairing request will appear; click "Pairing".
- Once Bluetooth pairing is successful, follow the Android Auto connection process displayed on the car screen.
- Ensure the Android Auto app is running on your mobile phone, and the system will connect automatically.
(Note: Screenshots for Wireless Android Auto connection steps are not available in the provided media. Follow the on-screen prompts.)
5.4 Android Wireless Screen Mirroring (Autolink)
- Scan the QR code provided in the interface's "Welcome To Auto Link" screen or use your mobile browser to download and install the Auto Link app.
- On the interface's "SmartPhone Setting" menu, switch the "AutoLink" option to "ON".
- Open the Auto Link software on your Android phone. Search for "CAR-WIFI-XXXX" and connect to it.
- A phone prompt box will appear; click "START NOW" to begin mirroring.
- For media sound, ensure your phone is also connected to the interface via Bluetooth.
(Note: Screenshots for Android Wireless Screen Mirroring steps are not available in the provided media. Follow the on-screen prompts.)
6. Audio Settings
6.1 Call Echo Cancellation
If you experience an echo during phone calls, you can use the echo cancellation feature:
- Navigate to Settings > Audio > AEC Delay in the CarPlay decoder menu.
- Click the "Start Auto AEC" button. This will generate a beep.
- To ensure accurate correction, follow these steps:
- Keep the car quiet (minimize background noise).
- Set the audio volume to a moderate position.
- Click "Start Auto AEC" again.
- Wait approximately 20 seconds for the estimation process to complete.
(Note: Screenshots for Audio Settings are not available in the provided media. Navigate through the interface menu.)
7. Maintenance
To ensure the longevity and optimal performance of your Bonroad Wireless CarPlay Android Auto Interface, consider the following general maintenance tips:
- Keep the device and connections clean and free from dust and debris.
- Avoid exposing the unit to extreme temperatures or moisture.
- Ensure all cable connections remain secure.
- Periodically check for firmware updates (if available) through the manufacturer's website or support channels to improve performance and add new features.
8. Troubleshooting
If you encounter issues with your Bonroad interface, please refer to the following general troubleshooting steps. For more complex problems, it is recommended to consult a professional installer or contact customer support.
- No Power: Check all power connections. Ensure the car's ignition is on.
- No Display/Black Screen: Verify LVDS cable connections. Ensure the correct input is selected on your car's MMI system (long-press "RETURN"). Check DIP switch settings for correct screen resolution.
- No Audio: Check audio cable connections. Ensure your phone's volume is up and the car's audio source is correctly selected.
- CarPlay/Android Auto Not Connecting:
- Ensure Bluetooth and Wi-Fi are enabled on your phone.
- Forget and re-pair the Bluetooth connection.
- Restart your phone and the car's MMI system.
- Verify the correct "CAR-xxxx" device is selected.
- Echo during Calls: Refer to the "Call Echo Cancellation" section (6.1) to adjust audio settings.
- Mirroring Issues:
- Ensure your phone is connected to the "CAR-WIFI-XXX" Wi-Fi network.
- Verify the correct mirroring option (AirPlay/Autolink) is selected on both the interface and your phone.
- Check for app permissions on your Android device for screen mirroring.
8.1 Information to Collect for Support
Before contacting customer support, please gather the following information to expedite the troubleshooting process:
- Your order ID.
- Your car model and year.
- The screen size of your car's display.
- The current toggle switch (DIP switch) setup.
- Details about the LVDS cable connection.
- The software version of the CarPlay decoder (found in the CarPlay decoder menu: Settings > System Version).
9. User Tips
Based on common user experiences, here are some tips for optimal use:
- For the most stable connection, especially for Android Auto, ensure your phone's operating system and the Android Auto app are up to date.
- If experiencing intermittent connectivity, try restarting both your phone and the car's MMI system.
- Always ensure the WiFi antenna is properly installed and not obstructed by metal for the best wireless performance.
- When using USB media playback, ensure your USB drive is formatted correctly and contains compatible audio/video files.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download, which may contain additional diagrams and specific instructions not covered here.
You can access the PDF user manual here.
For further assistance, please contact Bonroad customer service through their official channels.