Pictrey A400

Contents

Pictrey A400 4K Dash Cam User Manual

Model: A400

Brand: Pictrey

1. Product Introduction

The Pictrey A400 is a high-performance 4K Dash Cam designed to record your journeys with exceptional clarity. It features Advanced Driver Assistance Systems (ADAS), Wi-Fi and Bluetooth connectivity, a 1.9-inch IPS screen, parking monitoring capabilities, and enhanced night vision technology. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal use of your device.

Pictrey A400 4K Dash Cam with phone app interface and 4K logo

Figure 1.1: Pictrey A400 4K Dash Cam Overview

Main Features

  • 4K Clear Recording: Captures video at 3840x2160 resolution.
  • ADAS Driving Assistance: Provides alerts for safer driving.
  • Wi-Fi & Bluetooth Connect: For real-time preview, playback, download, and sharing via the DDPAI app.
  • Supercapacitor: Enhances safety and reliability, especially in extreme temperatures.
  • Multi-language Options: Supports various languages for user interface.
  • 1.9-inch IPS Display: For clear viewing and navigation.
  • NightVIS 2.0: Superior night vision for brighter, clearer images in low-light conditions.
  • 24/7 Parking Monitoring: Requires an intelligent hardwire kit for continuous surveillance.
Diagram showing main features of Pictrey A400: 4K Clear Recording, ADAS Driving Assistance, Wi-Fi & Bluetooth Connect, Extremely Large Capacity Expansion, Collision Detection, Supercapacitor, Multi-language Options, 1.9 IPS Display, NightVis 2.0, 24/7 Parking Monitoring

Figure 1.2: Pictrey A400 Main Features

2. Package Contents

Please check the box for the following items:

  • Pictrey A400 Dash Cam
  • Car Charger
  • Pry Tool
  • 3.5m Power Cable (USB Type-C)
  • 3M Adhesive Mount
  • Static Stickers
  • User Manual (this document)
Contents of the A400 package including the dash cam, car charger, pry tool, power cable, 3M adhesive, static stickers, and user manual

Figure 2.1: Pictrey A400 Package Contents

3. Specifications

Refer to the table below for detailed technical specifications of the Pictrey A400 Dash Cam.

FeatureSpecification
ModelA400
Input5V-2A
StorageSupports Micro-SD card up to 256GB (Class 10 recommended)
Resolution4K (3840x2160)
Display1.9 inches (IPS, Non-touchscreen)
ApertureF2.0
Encoding TechnologySupport H.265
Field of View (FOV)125°
Wi-Fi2.4GHz
Super CapacitorSupported
BluetoothBLE5.0
Video FormatMP4
Dimensions100.5mm x 66.7mm x 51.7mm
Working Temperature-20°C to 70°C (-4°F to 158°F)
Storage Temperature-40°C to 85°C (-40°F to 185°F)
Rear CameraNone

4. Setup and Installation

4.1 Device Overview

Familiarize yourself with the components and buttons of your A400 Dash Cam.

Front view of Pictrey A400 Dash Cam with numbered parts: 1. Lens, 2. 3M Adhesive Base, 3. Display (Non-touchscreen), 4. Function Buttons, 5. MIC

Figure 4.1: Front View of Dash Cam Components

Side view of Pictrey A400 Dash Cam with numbered parts: 6. USB Type-C Port, 7. Speaker, 8. Micro-SD Card Slot

Figure 4.2: Side View of Dash Cam Components

4.2 Memory Card Installation

The Pictrey A400 does not include a Micro-SD card. A high-quality Micro-SD card (Class 10 or higher, up to 256GB) must be purchased separately for the dash cam to function properly. Format the memory card before first use to prevent errors.

  1. Ensure the Dash Cam is powered off.
  2. Insert the memory card halfway into the Micro-SD Card Slot (8).
  3. Use your fingernail or a paper clip to push the card inward until it clicks and locks in place.

To remove the card, gently push its edge inward until it clicks and pops out, then pull it out.

Diagram showing how to insert a Micro-SD card into the dash cam slot

Figure 4.3: Memory Card Installation

4.3 Dash Cam Installation

Follow these steps to install the dash cam in your vehicle:

  1. Wipe the Front Windshield: Clean the area where the dash cam will be mounted to ensure the adhesive sticks firmly.
  2. Mount the Dash Cam: Peel off the film from the 3M adhesive on the mount and firmly attach it to the cleaned area on your windshield. Ensure the lens has a clear view of the road.
  3. Power On and Adjust Lens Angle: Connect the dash cam to power (see wiring options below). Once powered on, use the DDPAI app (see App Connection) to preview the camera's view and adjust the lens angle for optimal recording.
  4. Stabilize the Dash Cam: After confirming the position and angle, ensure the mount is securely pressed against the windshield.

Wiring Options

You can power your dash cam using one of the following methods:

  • Cigarette Lighter Power Supply: Insert the car charger into your vehicle's cigarette lighter socket. Connect the car charger to the dash cam using the provided USB Type-C power cable. Route the cable neatly along the windshield trim and dashboard, tucking it into gaps using the pry tool.
  • Fuse Box Connection (Intelligent Hardwire Kit Required): This method provides a cleaner installation and enables parking monitoring. It requires an intelligent hardwire kit (purchased separately) and professional installation is recommended to avoid vehicle damage.
  • OBD Interface Connection (OBD Power Cable Required): This method also enables parking monitoring and is relatively easy. Plug the Type-C connector of the OBD power cable (purchased separately) into the dash cam and the other end into your vehicle's OBD port.

Video 4.1: Pictrey A400 Installation and Usage Demo

4.4 App Connection

The DDPAI app is essential for managing your Pictrey A400 Dash Cam. It allows you to preview footage, adjust settings, download videos, and more.

4.4.1 Downloading the DDPAI App

Scan the QR code below or search for

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.