AMBITFUL GC12

Contents

Ambitful GC12 Gold Crow Air Inflatable Rod Lamp

User Instruction Manual

1. Important Safety Instructions

Please read and understand all safety instructions before using the Ambitful GC12 Gold Crow Air Inflatable Rod Lamp. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.

  • Inflate Before Use: Always inflate the air tube fully with the provided air pump before turning on the light. Operating the light without proper inflation can cause high temperatures and damage the air tube.
  • Initial Use: For the first use, perform a complete charge-discharge cycle. Fully discharge the battery until it's depleted, then fully charge it.
  • Water Protection: Ensure the Type-C charging port cover is securely closed to prevent rainwater from splashing in.
  • High Temperature Warning: Do not touch the magnetic suction area (marked with 'High Temperature Caution') when the product is operating, as it may become hot.
  • Avoid Damage: Keep the device away from sharp objects, corrosive liquids, and extremely high temperatures to prevent damage to the TPU air tube.
  • Handle with Care: Although the GC12 is an inflatable body, avoid excessive squeezing or dropping it from heights, which could cause damage.
  • Power Source: Use only the specified 5V/3A input voltage for charging.
Security Tips: Inflate first, then turn on the light
Figure 1: Security Tips - Always inflate the lamp first, then turn on the light.

2. Product Overview

The Ambitful GC12 Gold Crow is a 12W bi-color inflatable LED rod lamp designed for mobile handheld photography fill light. It features a wide color temperature range, stepless dimming, and a portable design.

Ambitful GC12 Gold Crow Air Inflatable Rod Lamp product overview
Figure 2: Ambitful GC12 Product Overview

What's in the Box

  • Light Body x1
  • USB-C Charging Cable x1
  • Storage Bag x1
  • User Manual x1 (This document, also available as PDF: View PDF Manual)
Contents of the Ambitful GC12 product box
Figure 3: What's in the Box

3. Setup

3.1 Inflation

  1. Locate the air-filled port on the light body.
  2. Open the cap of the air-filled port.
  3. Connect the provided air pump to the port.
  4. Turn on the air pump and inflate the light body until it is firm.
  5. Close the cap of the air-filled port securely after inflation.
Air Filled Port and Type-C Port
Figure 4: Air Filled Port (Inflate before turning on the light) and Type-C Port (Built-in protection against rainwater splash).

3.2 Mounting Options

The GC12 offers versatile mounting options:

  • Magnetic Base: The light features a strong magnetic back with 3 high-quality magnets, allowing it to be attached to any iron bracket or accessory for flexible lighting setups.
  • Strap Design: A strap is integrated for various light distribution methods, such as hanging or fixing to a light frame.
Ambitful GC12 with magnetic base GC-01
Figure 5: The GC12 can be connected to various accessories using its magnetic base.
Strong Magnetic Back of Ambitful GC12
Figure 6: The strong magnetic back allows for stable attachment to iron surfaces.
Strap Design for versatile mounting
Figure 7: The strap design allows for various light distribution methods, such as hanging.

4. Operating Instructions

4.1 Controls Overview

Parts Analysis of Ambitful GC12 controls
Figure 8: Parts Analysis - Display Screen, CCT 'K-', ON/OFF, Type-C Port, Brightness +, CCT 'K+', Brightness -.

4.2 Power On/Off

  • Power On: Short press the ON/OFF button to light up the screen. Then, press and hold the ON/OFF button for 3 seconds to fully power on.
  • Power Off: Press and hold the ON/OFF button for 3 seconds.

4.3 Brightness Adjustment

The GC12 features stepless dimming from 0% to 100%.

  • Press the Brightness + button to increase light intensity.
  • Press the Brightness - button to decrease light intensity.
Stepless Dimming 0%-100% on Ambitful GC12
Figure 9: Stepless Dimming from 0% to 100% for flexible photography lighting.

4.4 Color Temperature Adjustment

Adjust the color temperature from 2700K (warm) to 6500K (cool).

  • Press the CCT 'K+' button to increase the color temperature (cooler light).
  • Press the CCT 'K-' button to decrease the color temperature (warmer light).
2700K-6500K Color Temperature range
Figure 10: The GC12 offers a wide color temperature range from 2700K to 6500K.

4.5 Special Effect (FX) Modes

The GC12 features 8 dynamic FX effects to transform ambiance.

  1. Double-click the ON/OFF button to enter the mode setting interface.
  2. Use the CCT 'K+' and CCT 'K-' buttons to cycle through the available FX modes.

Available FX Modes:

  • Brightness: Standard constant light.
  • Blink: Light blinks at varying speeds.
  • Lightning: Simulates lightning flashes.
  • Bad TV: Simulates the flickering of an old television screen.
  • Broken Bulb: Simulates the flickering of a damaged light bulb.
  • SOS: International distress signal (three short, three long, three short flashes).
  • Burst: Rapid, intense flashes.
  • Flash: Single flash effect.
Icons for 8 dynamic FX effects
Figure 11: Icons representing the 8 dynamic FX effects.

5. Maintenance

5.1 Cleaning

To clean the light body, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents.

5.2 Storage

When not in use, deflate the light body and store it in the provided storage bag. Store in a cool, dry place away from direct sunlight and extreme temperatures.

5.3 Battery Care

The GC12 has a built-in high-capacity Li-ion battery (7.2V/2500mAh). For optimal battery life, avoid fully discharging the battery frequently and recharge it regularly, even if not in use for extended periods.

6. Troubleshooting

  • Light not turning on: Ensure the battery is charged. Check if the light body is properly inflated.
  • Light flickering unexpectedly: Check the battery level. Ensure the device is not in an FX mode that causes flickering (e.g., Bad TV, Broken Bulb).
  • Device overheating: Immediately turn off the device. Ensure the air tube is fully and properly inflated before operating. Allow the device to cool down before resuming use.
  • Controls unresponsive: Try turning the device off and on again. Ensure the battery has sufficient charge.

7. Specifications

BrandAMBITFUL
ModelGC12
Rated Power12W
Input Voltage5V/3A
Battery Capacity18.5Wh 7.2V 2500mAh
CRI95
TLCI96
Color Temperature2700K-6500K
Dimming Range0%-100%
ControlPanel Control
FX Type8
Inflatable Size600 × 120 × 71 mm
Storage Size190 × 125 × 23 mm
Weight≈216.6 g
Protection RatingIP66
Ambitful GC12 Parameters table
Figure 12: Detailed Product Parameters.

8. User Tips

  • Always Inflate Fully: To prevent overheating and ensure optimal light diffusion, always inflate the air tube completely before powering on the lamp.
  • Charge Before Use: Ensure the battery is fully charged for uninterrupted use, especially during critical shoots.
  • Experiment with FX Modes: The 8 dynamic FX modes can add creative flair to your photography. Experiment with them to find unique lighting effects for different scenarios.
  • Utilize Mounting Options: Don't limit yourself to handheld use. The magnetic base and strap design offer many possibilities for positioning the light, enhancing your creative control.

9. Warranty and Support

The Ambitful GC12 Gold Crow Air Inflatable Rod Lamp comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including warranty period and coverage details. Keep your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact the seller or the manufacturer directly. Contact information can typically be found on the product packaging or the official Ambitful website.

© 2023 AMBITFUL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.